Objectales

Popular

DIY Two Tone Votive Holders from Painted Metal Cups

featured 29410

DIY Two-Tone Spray Paint Cups: A Simple Goodwill Upcycle

We found a set of small metal cups at Goodwill for $1.50 each and, inspired by their little cut-out shapes, decided to give them a fast spray-paint makeover. The plan was simple and economical: a two-tone finish with a bright yellow interior and a clean white exterior to highlight the cut-outs and add a soft glow when lit with flameless candles.

img 29410 1

Materials used were basic and likely what most DIYers already have on hand: yellow spray paint, white spray paint, a few sheets of plain white paper, and the metal cups themselves. We considered masking the outside with painter’s tape and spraying the inside yellow, but that felt fiddly and risked peeling fresh paint when the tape came off. Instead we flipped the order and sprayed the inside first, allowing it to dry fully before protecting the interior while spraying the exterior white.

img 29410 2

Here’s the step-by-step method we used, written so you can replicate it easily:

  • Clean the cups: Remove any dust or residue so paint adheres evenly.
  • Spray the interior: Place the cups upside down or at a slight angle and spray the inside with yellow paint. Expect a little overspray on the outside—this is fine and easily covered.
  • Allow adequate drying time: We waited about five hours for the yellow coat to dry before proceeding. Drying times will vary by paint and climate, so follow the paint manufacturer’s guidance if needed.
  • Protect the interior: Rather than tape, we rolled plain white paper into a tube and slipped it into each cup to shield the yellow interior from the white spray on the exterior.
  • Spray the exterior: Apply white paint in light, even coats over the outside of the cup. Light passes over the cut-outs so your yellow interior will peek through when finished.
  • Remove the paper after drying: Once the white paint felt dry to the touch, remove the paper protector and inspect the two-tone result.

img 29410 3

After applying the coat of white paint and letting it set, we removed the paper guards and were delighted to find a nearly perfect separation between the yellow interior and white exterior. The method proved fast and low-tech, and it avoided the risk of peeling or jagged paint lines that can come from masking tape on newly painted surfaces.

img 29410 4

The whole hands-on portion of the project took only a few minutes per cup—most of the time is simply waiting for paint to dry. We allowed about five hours between the yellow and the white coats to make sure the interior was fully set before protecting it and spraying the exterior.

img 29410 5

These two-tone cups are especially well suited to flameless candles. The yellow interior provides a warm, candlelike glow without any flame or heat, making the cups both decorative and safe for tabletops, mantels, or any small vignette where real candles might be risky. Flameless, battery-operated candles are handy for projects like this—if you’ve resisted them, these little cups might change your mind. They create ambiance without the worry of open flame.

img 29410 6

If you try this technique, here are a few practical tips:

  • Work in a well-ventilated area and follow spray paint safety instructions.
  • Use light, multiple passes of spray paint rather than one heavy coat to reduce drips.
  • Test the paper protector on a spare cup or area first to ensure it won’t stick to the paint.
  • Experiment with interior and exterior color combinations—matte white outside with a metallic or bright interior can be striking.

img 29410 7

Are you working on any two-tone spray paint projects right now? Do you use battery-operated candles for small decor pieces like this, or do you prefer real flames? We found this technique quick, inexpensive, and effective for turning thrift-store finds into cozy, luminous accents that won’t set off any smoke alarms.