Apply Frosted Film to a Glass Door Without Bubbles
Small Laundry Room Upgrades: Frosted Glass, Less Clutter, More Light
We know the big changes that will make the biggest difference in our tiny laundry area: energy-efficient appliances and built-in storage. While we save and plan for those major upgrades, we spent a few evenings tackling smaller projects that make the room more functional and pleasant right now.

First up was the glass side door. That door gave anyone a direct line from the carport, through the laundry area, and into the kitchen. It was fine for letting light through, but it offered basically zero privacy. We’d been using a bi-fold door as a temporary solution, but it never felt quite right for the space.

At first we thought a simple wooden blind or a bamboo roll-up shade would do the trick. After trying a bamboo rolling shade, though, we realized it blocked more light than we wanted. Our kitchen is already the darkest room in the mornings—the window above the sink looks into the sunroom rather than outside—so preserving morning light was important.
We decided to try frosted window film instead. We used the same materials and basic technique we used previously when frosting other windows, following a step-by-step approach we’ve used before. The film gave us the privacy we wanted without sacrificing natural light.

The only challenge was bubbles. With window film you always get a few at first, and usually a squeegee clears them. This time, though, some bubbles wouldn’t budge. We tried squeegeeing harder and thought maybe we hadn’t used enough applicator spray. We also wondered if the cold temperature on the other side of the glass—below the recommended 40°F for applying the film—was part of the problem.
We peeled the bubbled film off, scraped away leftover adhesive, and prepped the glass again. This time we used more applicator solution to keep the film slippery while we smoothed it into place. That extra moisture made a big difference—once we reinstalled the film carefully, the bubbles disappeared and the finish looked clean and even. Relief.

Next on the list were the shallow shelves beside the door. We love storage, but these shelves were exposed and awkward—every time we came through the door with arms full, we’d bump into whatever was sitting on them. Rather than keep semi-functional shelving, we removed them. The plan is to turn that wall into a spot for art or a framed-photo collage someday. A little visual rest and personality makes a laundry room feel more welcoming and less purely utilitarian.

While we were in demo mode, we also removed the shutters from the small laundry window to make room for whatever window treatment we decide on later—a blind, roman shade, or curtains. Getting those shutters down was quick, and it keeps the options open for a softer, more intentional look in the future.

By morning, the laundry area already felt more open and calmer. No bi-fold in sight, no shallow shelves jutting into the walkway, and plenty of soft, diffused light coming through the frosted glass—exactly what we wanted.



There’s still some touch-up paint to do where the shelves and shutters were, but overall the room feels brighter and less cluttered. The frosted film kept the light while giving us privacy, and removing the awkward shelving improved the flow for daily use.

Have you used frosted window film in a similar spot? Did you ever run into persistent bubbles, and if so do you think temperature or insufficient applicator solution was to blame? We’d love to hear what worked for you if you have tips for a smoother installation.

P.S. We announced this week’s giveaway winners on the original post—check back on that post to see if it’s you.








