DIY Clothespin Chandelier: Rustic Home Decor Project
We made it — we hit our self-imposed Tuesday morning deadline and finished a clothespin chandelier for our unofficial Pinterest Challenge (an idea dreamed up by Katie B to get us to stop pinning and start doing). It was a fun, slightly frantic project that turned out even better than we expected.

Here’s a concise rundown of what we did and how we did it. We shared a few supply photos earlier in the week so we could gather everything on hand before getting started.

We didn’t use everything shown in that photo, but most of it came in handy. Supplies ultimately used included a plug-in lamp kit from Ikea (converted to hardwired), a roll of hardware cloth (wire fencing) from Lowe’s, white gloss spray paint, craft wire, metal snips and gloves, and eight bags of medium wooden clothespins.

About the light kit: it was a simple plug-in fixture that an electrician friend showed us how to convert to a hardwired ceiling light by removing the plug, exposing the internal wires, and attaching them to the ceiling junction box (power off, of course). We finished it with a small ceiling canopy to clean up the look.

To hide the bare kit we built a drum-style shade from hardware cloth. Wearing gloves and using metal snips, we cut a strip of fencing about 9.5″ tall so the finished shade would measure roughly 10–11″ once the clothespins were attached.

We formed the fencing into a loop with a 10″ diameter and used thin craft wire to bind the ends together and secure the seam. The fencing held its shape well, so we didn’t need any pre-made rings. The craft wire was about 22-gauge — thin enough to twist easily but sturdy enough to hold the frame together.

We considered several ways to attach the ceiling light to the wire shade — from cutting a round piece of fencing with a center hole to repurposing items like a splatter guard or drip pan. Those ideas were scrapped because they either blocked too much light or would have cast odd shadows on the ceiling. We settled on a simpler hanging solution described below.

Before attaching clothespins we sprayed the assembled wire shade with white gloss paint. Two reasons: it tied the shade to the white ceiling canopy and gave a polished finish, and it sealed the metal surface (some older fencing can contain trace metals, so sealing and painting is a good cautious approach). We sprayed in a well-ventilated area, wearing gloves, and kept the work away from children.

Next came the clothespins. Tracking down the right size took a little hunting, and we ended up using eight packs of medium wooden clothespins (40 per pack). We tested several attachment patterns: a simple row-by-row layout, a zig-zag/alternating pattern, and a diagonal configuration. Each pattern changed how much light came through and the overall visual weight of the shade.

After comparing options with the light on, the zig-zag pattern felt airier and let more light through, so we went with that. We were fortunate that our fencing seam created an even number of squares around the top, so the pattern wrapped cleanly without an awkward seam.

To hang the shade we used the same craft wire to form three secure attachment points and installed heavy-duty ceiling hooks with proper anchors. Make sure anchors are rated for the load — the finished clothespin shade weighs about four pounds, so the mounting needs to be solid.

We left the clothespins in their natural wood color. We liked how that tied into nearby decor, made the material obvious (which is part of the charm), and glows warmly when the light is on. The final fixture casts a pleasant starburst-like pattern on the ceiling and feels playful and sculptural.

Safety note: many lampshades are made from flammable materials, so it’s important to keep combustibles a safe distance from the bulb and to use cool-running bulbs such as LEDs or CFLs. Make sure heat can escape from the top and bottom of the shade.

Project stats: we used 320 clothespins (eight packs) and the finished shade weighs about four pounds. Budget breakdown:
- 8 packs of 40 medium clothespins: $16
- Pack of ceiling hooks and anchors: $1
- Roll of hardware cloth (wire fencing): $8
- Ikea lamp kit: $4
- Ceiling canopy: $5
- Wire and spray paint: already owned
- Total: $34

Practical considerations: the fixture hangs 16″ down from our 8-foot ceiling, so the bottom is nearly 7 feet off the floor; even someone 6′ tall had no issues walking under it. Because it’s centered in the room rather than directly above the washer and dryer, it doesn’t interfere with moving laundry around.

We’re delighted with how quirky and sculptural the chandelier looks. If you decide to try this project, plan your pattern ahead, make sure your fencing has an even number of squares around the perimeter for a seamless wrap, and use safe, cool-running bulbs. We can’t wait to see other creative takes on this idea — it’s a fun way to turn simple supplies into a memorable light fixture.









