Objectales

Popular

How to Install Toe Kicks and a Window Sill

featured 43498

Kitchen Cabinet Painting Progress: Trim, Hinges, Color, and Prep

We’re finally digging into the painting phase of the kitchen, but it turns out there’s a lot to do before a single cabinet gets its new coat. What started as a simple plan to retrofit a few doors and paint quickly turned into a list of prep tasks: filling gaps, sanding rough spots, adding trim, deciding on hinges and hardware, choosing primer and paint, and more. Here’s a clear update on what we’ve done so far and the steps left to finish the job properly.

Window Sill and Trim

First up was rebuilding the window sill and molding so we could caulk, prime, and paint them while the cabinets were still out. Our old sill was a piece of granite that matched the previous counters, but we preferred a wood sill like the one in our first house. I picked up a pine board, cut notches to fit, slid it into place, and nailed it down.

img 43498 1

After installing the sill I cut and nailed the casing around the edges and added a smaller piece beneath the sill to echo the half-wall ledge we’d done elsewhere.

img 43498 2

img 43498 3

The window is now ready for corner caulking, primer on the raw wood, and a coat of white semi-gloss paint for durability and easy cleaning.

Toe-Kick and Baseboard Work

We also addressed the toe-kick around the base cabinets. Many pieces were removed when we rearranged cabinets, so in some places I reused leftovers. For the peninsula, which is newly added to the layout, I couldn’t find off-the-shelf toe-kick trim, so I installed pre-primed baseboard that matched the height. Since everything will be painted the same cabinet color, it will blend in seamlessly.

img 43498 4

img 43498 5

We haven’t decided yet how we’ll treat the back of the peninsula (options include worn wood or raised panels), which is why the toe-kick stops at the right. That raw end will be covered when we finalize the back and side treatment. Shoe molding will wait until after the new floors are installed—primed and painted first to avoid getting paint on the new cork floors.

Fixing Uneven Cabinet Frames

One corner cabinet sat slightly higher than the cabinets on either side by exactly 1/2″. To fix that without clear access for tools, I glued and clamped 1/2″ strips of pine craft wood under the frame. Once we putty, sand, prime, and paint, the repair should be invisible.

img 43498 6

Hinges and Hardware Decisions

We considered hidden hinges, but our doors are half-sunk with a thin stepped edge, so routing for concealed hinges would make the edges too thin. We found exposed hinges work well with our door style and there are plenty of attractive examples to emulate, so we embraced exposed hinges and suitable hardware.

We tried spray-painting our original hinges in two satin nickel spray finishes to match our chosen hardware and save money, but the results weren’t good. The finish looked stippled and artificial, and the paint wore off where the hinge moves. In the end, paying about $90 for new hinges was a small price for a clean, durable, and functional result.

img 43498 7

img 43498 8

Choosing the Cabinet Color

We finally picked a cabinet color. After toggling between bright white and soft warm gray or greige, we decided pure white would feel classic, but we didn’t want a stark, bright white. We tested many swatches against the counters, the soft gray penny tile backsplash, and our dark cork floors. We narrowed the choices down and kept the swatch that felt like the right balance: a very light warm gray—subtle greige—that reads as a soft white from a distance but reveals a gentle tone up close. Our chosen color is called Cloud Cover.

img 43498 9

img 43498 10

img 43498 11

Painting Process: Step-by-Step

Here’s the painting workflow we’ll follow to ensure a durable, professional-looking finish:

  • Remove doors, drawer fronts, and hardware
  • Empty all cabinet interiors
  • Use wood putty to fill gaps, seams, and old knob holes
  • Sand dried putty and any dings until surfaces are smooth
  • Sand all door faces, backs, and cabinet frames to scuff the finish for better adhesion
  • Thoroughly clean up sanding dust to avoid contaminating primer
  • Use a liquid deglosser on doors and frames for extra adhesion
  • Buy and finalize hardware and hinge plan
  • Prime (one coat if possible, depending on primer performance)
  • Paint (target two coats per side for doors and frames)
  • Allow paint to dry and cure for 3–5 full days per manufacturer guidance
  • Drill holes and install new hinges and hardware
  • Rehang doors and reinstall drawers
  • Restock cabinets and drawers
  • Celebrate with a well-deserved nap
  • Take detailed after photos

Preparing the Workspace and Finishing Up

We cleared out the sunroom, which became our painting and finishing area, and donated usable cabinet scraps to a local thrift store. Smaller leftover pieces went into the scrap pile in the basement. The sunroom now serves as our makeshift workshop for puttying, sanding, priming, and painting—laid out over drop cloths to protect furniture and keep fumes away from the main house. This setup also helps keep the workspace off-limits to our toddler.

img 43498 12

img 43498 13

img 43498 14

img 43498 15

img 43498 16

We’ve already removed the cabinet doors, drawer fronts, and hardware, and emptied most of the cabinets—small but satisfying accomplishments on the road to a full cabinet refresh.

img 43498 17

We plan to prime and paint during the week between Christmas and New Year’s, then share extensive after photos once everything is reassembled. It’s been a lot of prep work, but taking the time now means a paint job that looks great and lasts for years.

What projects are you tackling this week? Any holiday preparations or big lists? We’d love to hear what you’re working on.