Objectales

Popular

How to Convert a Boob Light to a Pendant Light

featured 45728

The evening after we posted our plans for a mini-update to our master bathroom, Sherry had me in the car hunting down the blue light fixture from her mood board.

img 45728 1

We found a Shades of Light pendant at a local outlet called The Decorating Outlet — the same store where we bought several other fixtures for the house. To our surprise, they had two in stock and they were half off, so we walked out with the blue pendant for about $80. It’s not the cheapest light we’ve ever bought, but the seeded blue glass creates a beautiful, uncommon effect that felt worth the splurge.

img 45728 2

One of the main reasons for switching from our old flush mount to a pendant was to make the ceiling look less crowded near the shower bar. Our bathroom is tiny, so a wide flush fixture sat uncomfortably close to the shower curtain. A pendant with a smaller ceiling footprint and translucent glass would not only reduce that cramped feeling but also let light diffuse more softly.

img 45728 3

Plus, the seeded, swirly glass hinted at just enough visual interest to become a focal point in this otherwise builder-basic room.

img 45728 4

We figured swapping fixtures would be a quick afternoon task — we’ve installed lights before — but when we removed the old fixture we uncovered a large, rough hole around the junction box that the new pendant’s smaller base wouldn’t cover.

img 45728 5

img 45728 6

So the install quickly moved down the to-do list and “patch ceiling” moved up. Fortunately we had leftover drywall in the basement from a previous project, so I cut a patch to size, measured and cut a hole for the fixture box, and planned to secure and finish it before hanging the pendant.

img 45728 7

img 45728 8

To fasten the patch, I screwed scrap wood into the ceiling to give the new drywall something solid to hold on to, then attached the drywall so it sat flush with the surrounding ceiling.

img 45728 9

The patch looked good but, as usual with drywall, it needed spackle and sanding to hide seams and countersink screw heads. I sanded the edges to smooth lumps and prepare the surface for Sherry’s spackling.

img 45728 10

img 45728 11

We’ve naturally divided tasks between us over years of DIY — I tend to handle structural bits while Sherry does the finishing touches, like spackling and cutting in paint. She applied two rounds of spackle, letting each layer dry before sanding. Using a sanding block keeps the surface flat and helps achieve a seamless finish.

img 45728 12

After priming the raw drywall, we rolled two coats of Rockport Gray paint and feathered the edges beyond the patched area to blend it with the existing ceiling. With the ceiling repaired and painted, the fixture box no longer looked out of place and the space felt less crowded.

img 45728 13

Before hanging the pendant we trimmed the excess cord. I initially used scissors to strip back the outer casing, although a wire stripper is the smarter tool for the job because it avoids stressing the inner wires. After exposing the inner wires I stripped the tips and prepared them for connection.

img 45728 14

img 45728 15

Installing a pendant is often a two-person job: one person holds the light while the other connects the wires and secures the canopy. With the ceiling fixed it went smoothly, and the pendant looked much better proportioned above the shower area than the old wide fixture did.

img 45728 19

In photos the blue can read brighter than it appears in person. The pendant is actually a soft sea-glass blue that complements the gray walls and white curtain, bringing personality to a small neutral space without casting a strong blue tint. Because the bulb is clear, the light it casts is clear too, and the seeded glass creates a subtle, flattering reflection on the ceiling rather than a harsh color wash.

img 45728 20

The chrome trim and canopy on the fixture match our other bathroom hardware, so it feels cohesive. Ideally the fixture would sit centered above the toilet area and in front of the window, but for this quick update we kept the existing junction location. Moving it would be a bigger Phase Two project, possibly tied to a tile and floor redo.

img 45728 21

Overall, despite the unexpected ceiling patch, we’re thrilled with the result. The pendant adds color and character to the room, and it’s inspired us to keep introducing subtle blue, green, white, and gray accents and swap dingy trim for a crisp bright white.

img 45728 24

Our remaining bathroom to-dos:

  • paint the walls so they have some contrast
  • replace the boob light
  • paint the cream trim white — it looks white in photos, but the bright white switch next to the cream trim makes the mismatch obvious in person
  • hang some bathroom-friendly art
  • replace the toilet with a classic white model
  • add privacy to the window
  • remove the door to shave the bottom so a rug can sit flush and the door clears the floor register
  • consider replacing the border tile around the room in a later phase
  • replace the floor tile down the road to break up the expanse of tile

Have you tackled a small bathroom refresh lately? Did you add a pop of color, or uncover an unexpected ceiling issue hidden by an old fixture?

To follow our bathroom mini-renovation from the start, check out our initial planning and painting posts. And a timely note: today happens to be “Light It Up Blue” day for Autism Awareness — a nice coincidence that highlights the pendant’s color.