How to Weatherproof Outdoor Furniture with Varnish and Teak Oil
T-minus about twenty-four hours until we get furniture on the deck. I’m ridiculously excited about it—yes, those are enthusiastic exclamation points and an unnecessary verbal flourish. I may even break into a perfectly coordinated (and not at all embarrassing) little dance when everything is in place.
We still need to decide which stain or sealer to use on the deck. Some products require pressure-treated wood to acclimate and dry before application, while others can be used sooner. In the meantime, we decided that putting some furniture out there will let us start enjoying the space right away. It’ll only take about twenty minutes to move things when it’s time to seal the wood, and we already bought the table and chairs months ago, so I wasn’t willing to wait any longer. Call me impatient if you want, but I want to sit outside now.

By this time tomorrow we’ll have the table and chairs out there, plus outdoor pillows and a few accessories because I love those finishing touches. Before we toss everything onto the deck, though, there’s a bit of prep work that will help keep the furniture looking good season after season. It’s not glamorous, but it pays off in longevity and appearance.
For example, the inexpensive table we bought from World Market (a great deal, by the way) recommended at least three coats of a protective water-based polyurethane to prevent cracking and peeling over time. We assembled the table in the carport and ran out for the right poly to make sure it holds up.


We chose a water-based exterior poly that advertises clear drying and high weather resistance. That was important to us for a few reasons: oil-based polyurethanes can yellow over time (especially on white surfaces), and this product was formulated for outdoor use, so it’s designed to resist sun and moisture. The label even mentioned boats and outdoor tables, which reassured us that it’s built to withstand exposure and won’t harm painted surfaces.
Application tips we followed:
- Set each leg on cardboard to protect the carport floor while brushing on the poly.
- Use an extra-wide brush to get into the slats and cover more surface area with each stroke.
- Follow the manufacturer’s directions exactly—in our case we applied three thin coats at two-hour intervals (first coat at 4 p.m., second at 6 p.m., and a final coat at 8 p.m.).
- Allow the full recommended drying time before moving the table; I’ll carefully carry it to the deck later so we can photograph the finished setup tomorrow morning.


Now for the chairs. We picked up a set of affordable wooden outdoor chairs made from acacia, a hardwood similar to teak that handles moisture and outdoor conditions well. Acacia has a rich, warm tone that gets even better when it’s oiled, so for a small investment we bought teak oil (which works on acacia) and prepped the chairs before putting them on the deck.


Wood-oiling tips we used:
- Lay cardboard beneath the chairs to catch any drips and wear clothes you don’t mind getting oil on.
- Follow the product instructions: apply a coat of oil, let it penetrate for the recommended time (we waited thirty minutes), apply a second coat and let it sit (we waited another fifteen minutes), then wipe off excess with a clean cloth.
- Instead of lint-prone rags, I used a couple of old socks—one to apply the oil and one to wipe down the chairs after the recommended dwell time.
- Give the chairs ample drying time before use; the product called for 8–10 hours, so I plan to move them to the deck later this afternoon and let them cure overnight.



Those are the maintenance steps we took to protect our outdoor furniture and make the deck enjoyable for years to come. Properly applying a clear, weather-resistant poly to painted table surfaces and oiling acacia chairs will help prevent peeling, yellowing, and premature wear. If you’re outfitting a deck, consider weather-resistant finishes, and always follow product directions for the best results. What are you sealing or oiling this season to keep your outdoor furniture in top condition?
P.S. You can find more about how we planned and built the deck and about our approach to priming, painting, and sealing furniture in our previous posts on those topics.








