Objectales

Popular

DIY Kids’ Train Play Board: Step-by-Step Guide

featured 50815

DIY Train Board for Kids: A Simple, Low-VOC Project

All aboard! Clara’s obsession with the big train layout at Barnes & Noble inspired us to build a portable version she could play with at home. Every time we pull into that bookstore’s parking lot she yells, “We’re getting to play with the trains!” so we decided to make our own fixed train board using the Melissa & Doug pieces she already loves.

img 50815 1

We’d seen a few ideas online—Aubrey and Lindsey’s blog and a DIY train playboard tutorial among others—and adapted what we liked. Our goals were straightforward:

  • Use the existing train pieces to build a large, fun track.
  • Use solid whitewood for the board to avoid the off-gassing associated with MDF or some plywood options.
  • Paint a playful background—ocean, beach, grass, forest—to spark imagination.
  • Use low-VOC paint and sealer and fasten the track from underneath to avoid smelly glues.

Here’s how we did it for about $28: three sample paint pots at roughly $9 total and a single 12″ whitewood plank cut into three boards for about $19. First, John had a 10″ x 1″ x 12′ board cut at the store into three equal 10″ x 1″ x 47″ boards. He joined them with a Kreg Jig; you could also use flat braces of wood or metal on the back and add felt pads to protect floors and furniture. We sanded everything to remove rough spots and splinters—seams ended up barely visible.

img 50815 2

Next we arranged the tracks in many different configurations before settling on one that includes hills, an elevated section, a bridge, a tunnel, and an incline where trains can roll off the board—Clara loves the dramatic crashes.

img 50815 3

We sketched a simple background on paper first—the green for grass, blue for ocean, a sandy stripe, and darker green for forest—then lightly penciled those sections onto the board so we could paint cleanly.

img 50815 4

img 50815 5

We bought three low-VOC sample pots—Japanese Fern, Mirage Lake, and Shamrock by Behr Ultra—and took the track apart to paint the background. Tip: photograph your chosen layout before disassembling so you can re-create it later.

img 50815 6

I painted the ocean first, then the grass (they didn’t touch, so no wet-edge issues). We left the knots in the wood visible for a more authentic look and skipped priming; if you prefer a fully opaque surface, apply a stain-blocking primer first.

img 50815 7

After the paint dried I worked on the forest shapes, then added the sand using leftover no-VOC white paint to create a bright white beach between the ocean and the grass.

img 50815 8

When the paint fully cured we applied several thin coats of eco-friendly acrylic sealer (Acrylacq by Safecoat) to protect the finish. The key is thin, even coats and allowing full drying time between applications to avoid gummy surfaces.

We decided to fasten the track to the board for a few reasons:

  • At Clara’s age, assembling the track herself was frustrating and often led to tears.
  • She enjoys the fixed-track setup at bookstores, which encourages independent, imaginative play without the tantrums that come from fiddling with loose pieces.
  • The screws we used are removable from below, so the track can be unlocked and rebuilt later if she wants to construct her own layouts.

After 48 hours of cure time for the poly, we laid out the track and attached it with screws driven up from the underside. John drilled pilot holes from the top through to the back, then fastened the track from beneath so the visible surface stays clean and screw-free.

img 50815 9

We used countersunk screws so they sit recessed on the back and won’t scratch floors. Felt pads were added to protect surfaces when the board is placed on the table or ottoman.

img 50815 10

The elevated section is supported by blocks attached the same way—from the back—to hide hardware. We secured the track to those blocks with small finish nails driven into the track grooves; they’re discreet but sturdy.

img 50815 11

To make a track appear to lead off the corner, John traced the board’s edge onto the bottom of the track, cut along that line, sanded the edge smooth, and re-attached it from underneath.

img 50815 12

Once everything was secured we tested the board upside down to ensure all fastenings held. It’s surprisingly robust—even after Clara kicked the elevated section, it stayed put.

img 50815 13

Choo-choo! Here’s the finished board in action:

img 50815 14

Clara absolutely loves it. She narrates trips to the beach, the forest, and over hills, and she especially enjoys rolling trains down the central hill into dramatic pile-ups. Sometimes she even lets us play along.

img 50815 15

One practical advantage: the board is flat and slides completely under the sofa for easy storage, which makes it feel special when we bring it out and then tuck it away again. That brief “limited edition” quality seems to make Clara value the playtime more.

img 50815 16

So that’s our $28 DIY train board: solid wood, low-VOC finishes, a playful painted background, and a fixed track that encourages independent imaginative play. Have you built any kids’ projects lately? We’d love to hear what you’ve been sanding, painting, or assembling.