How to Build a Wooden Bathroom Mirror Frame
DIY Mirror Frame: Simple, Low-Cost Bathroom Upgrade
Who framed Roger Rabbit? I can’t remember the ending of that movie, but I do remember who framed our hall bathroom mirror: we did. Turning a plain builder-grade mirror into a framed mirror is one of the quickest and most effective DIY bathroom upgrades. It’s especially useful when you want a fresh look without gutting tile or doing a full renovation. In our case the classic black-and-white tile stayed, so framing the mirror was the perfect low-cost improvement.

We kept the frame design simple and chunky to complement a nearby shelf and other subtle accents without competing with patterned elements like our window shade or the new vanity knobs. For materials we bought 1×3 pine boards cut to length — total wood cost was about $14. I used a miter saw to cut 45-degree corners, but if you don’t have a miter saw you can build a straightforward, square-cornered frame and still get a great result.

One challenge we faced was the plastic clips that secure the mirror to the wall. The frame needed to sit flush over those clips, so we had to notch the back of the wood to allow room for them. I marked the clip locations and cut notches generous enough to allow for a little wiggle room when fitting the frame.

If you don’t have a router, don’t worry. I actually didn’t have a working router either. Here’s a simple alternative method that works with common tools:
- Use a Dremel or utility knife to outline the notch edges for a cleaner line (optional).
- Drill several shallow pilot holes closely together inside the marked notch area.
- Follow with a larger drill bit so the holes begin to overlap.
- Use a flathead screwdriver and a hammer to carefully chip away the remaining material until the notch fits the clip.

The result won’t look factory-perfect, but the notches sit behind the frame or behind the mirror clips and are not visible once the frame is installed. I made four notches in total, one for each clip, and then used a pocket-hole jig to join the corners securely.

Before painting, we test-fit the assembled frame to make sure it was square and that the notches aligned correctly with the mirror clips. Once everything fit, I primed and painted the frame in a semi-gloss white (Decorator’s White by Benjamin Moore), using a small foam roller to get a smooth finish. While we were at it, we painted a nearby shelf to match so the whole area felt cohesive.

Some people glue frames directly to mirrors with heavy-duty adhesive or caulk. From a previous experience I preferred to avoid bonding the wood directly to the glass, so we planned our frame to overlap the top edge of the mirror where there was access to the wall. That allowed us to drive a couple of unobtrusive screws through the frame and into the wall studs or drywall anchors without risking damage to the mirror. Because the frame is lightweight, a few screws are plenty to hold it securely.

To keep the bottom edge from moving, we added a few small dots of silicone caulk to stick the frame lightly to the mirror. We taped the frame in place while the caulk cured so it remained flush and level. After the caulk dried we removed the tape, filled the screw holes with wood putty, and touched up the paint for a clean finish.

The finished frame gives the mirror a much more polished, finished look. It visually lifts the room and draws the eye upward, which makes the space feel taller and more balanced with an extra-tall shower curtain on the opposite wall.

Altogether the mirror frame took about three hours of work — cutting, notching, assembling, priming, and painting — and cost roughly $14 for the wood. It’s a great example of a high-impact, budget-friendly bathroom mirror upgrade.

To give context for the rest of this mini bathroom makeover, here’s a quick budget summary of the other changes we made in this space:
- New light fixture: $61
- Shelf: $6
- Paint (quart): $24
- Fish art: $30
- Knobs: $17
- Window fabric (we used about $8 worth): $16 per yard (leftover)
- Window frosting: $0 (leftover materials)
- Mirror frame: $14
- Shadowbox and accessories: already owned
- Total: $168

We’re especially happy with the combination of the patterned window fabric and the fish art—those two elements added personality while letting the rest of the room stay neutral. For under $200 you can dramatically refresh a dated or plain bathroom by focusing on targeted upgrades like a framed mirror, lighting, and a new shade.

This project officially wraps up this portion of our bathroom update, though we still have other bathrooms to tackle in the house. If you’re planning your own bathroom refresh, consider a DIY mirror frame as a quick, affordable, high-impact renovation that even beginners can handle with basic tools and a little patience.

Update — If you’re curious about specific paint colors or items we used in the room, check product notes or photos in your own reference materials.









