DIY No-Sew Ikat Curtains for a Kid’s Room
Some people choose neutral, breezy white curtains to balance a bold patterned daybed. Others pull a color directly from the bedding—bold red cotton panels, taupe-gray velvet, or similar—to tie the room together. For Clara’s new room, we wanted something playful and layered rather than quiet and safe, so we took her to our local fabric outlet, U-Fab in Richmond, to see what she’d pick. After all, it’s her space.

She was immediately drawn to a pattern that included navy and white—two colors we’ve been planning to add to help balance all the pinks and reds in the room. She also tried out a few louder options (bright orange with oversized coral, a dark purple plaid), but this navy-and-white print kept catching her eye. The subtle, slightly chevron-like linear pattern echoed the texture of her daybed blanket, which made it feel like a natural fit.

Because the fabric was already on sale and the store was offering an extra 20% off, we bought just over ten yards to make four extra-long panels. That worked out to about $25 per panel after discounts, which felt reasonable given how full and substantial the panels would be.

When we got home and tucked Clara in for a nap, I unrolled the fabric and cut the panels while she slept—less chance of little hands pulling the roll every which way that way. My measuring method is simple: decide the final curtain length you want (for example, 89″) and add two extra inches for hems. So I cut each panel to 91″, then hemmed them down to the finished 89″. I also use the full width of the bolt so each panel is as thick and full as possible, which means less cutting and a better drape.

I cut one panel first and used it as a template for the others, laying it on top of the fabric and tracing the same size for a total of four matching panels. For hemming I used heavy-duty hem tape (the Heat N Bond type) and an iron—my go-to method for over five years. Hem tape creates a crisp, straight hem and holds up through washing, and I find it easier to get a perfectly straight line than with sewing. As always, I prewashed the fabric first so everything was pre-shrunk before cutting and hemming.

We already had the curtain rod and ring clips from an earlier project, so we simply reinstalled them after the painting was finished. A handy tip John uses when drilling is to fold a small strip of painter’s tape under the hole so the tape projects out like a ledge to catch drill dust and crumbs—keeps the area cleaner and makes the drilling neater.

For secure mounting, we used plastic wall anchors so the rod is supported by more than just screws—an important safety step in a child’s room. If a kid ever grabs the curtains, the fabric is more likely to slide out of the ring clip than for the whole rod to come crashing down.

In photos the curtains sometimes read as black and white, but in person they’re a deep navy. We plan to bring more navy into the room—picture navy picture frames, a couple of navy pillows on the daybed, or a navy ottoman—to link the curtains visually to the rug and bedding. That will help the room feel more cohesive as we add layers and accessories.

A few hanging tips that make curtain installation easier and more accurate:
- Have someone hold the curtain panels clipped to the rod at different heights while you step back and evaluate the look, then mark the wall at the preferred height. That prevents guessing and eliminates re-hanging because of miscalculations.
- Leave the panels a touch off the floor so they nearly touch but don’t drag—this helps them stay cleaner and gives a full, looped appearance.
- Prewash fabric before cutting and hemming to avoid post-installation shrinkage.

The room still feels a bit empty and there are more layers to add—a small kids’ table, an ottoman to break up the pink rug, playful art, a new light fixture, and some storage solutions. Our ongoing to-do list includes hanging art and three-dimensional pieces, installing a new light, refinishing a dresser we found, painting play chairs a bright color, transforming the closet into a usable wardrobe/reading nook, and adding crown molding to finish the space.
- hang art and 3D wall pieces
- install a new light fixture
- refinish or paint Clara’s dresser
- paint play chairs to match the table
- convert the cluttered closet into a clothes closet and reading nook
- add crown molding and other finishing touches
- bring in accessories: pillows, toy storage, and more
Kid rooms are so much fun because they invite bold choices and playful layers. We loved letting Clara help choose the fabric, and the whole process—selecting fabric, cutting panels, using hem tape, and fine-tuning the rod height—felt approachable and rewarding. Are you making curtains for a child’s room or letting kids pick their fabrics? If so, the clip-the-curtains-to-the-rod-and-hang-the-rod trick is a simple way to get the perfect length the first time around.
Psst—The latest round of Clara Conversations is up on our site, and there are a few real gems from our little design helper.








