Objectales

Popular

How to Paint Trim and Doors with a Sprayer

featured 58378

If there’s one thing we’ve made clear about our new house, it’s that we’re not fans of the existing trim colors.

img 58378 1

The trim ranged from a dusty Williamsburg Blue to a muddled Mauve, and as we peeled back layers of carpet and subfloor it suddenly felt like the perfect time to tackle a major paint refresh. Excitement—and maybe a little dread—set in.

img 58378 2

With all the carpet removed and the new hardwoods not yet installed, the exposed subfloor gave us a paint-friendly workspace. We decided to focus on the upstairs trim and doors—sixteen doors in total—which we removed and de-hardwared to make painting easier.

img 58378 3

Painting trim for four bedrooms, their closets, a long hallway, nine multi-pane windows and sixteen doors by brush and roller felt like a big job, so we finally invested in a paint sprayer. Based on a recommendation, we picked up a Graco TrueCoat II model on sale for about $180. (Update: after gaining more experience, we later switched to another sprayer that worked better for us.) Buying a sprayer made sense since there’s plenty more to paint in the house—there’s still a lot of blue trim downstairs.

img 58378 4

The sprayer turned out to be simpler than we expected: essentially a plastic cup attached to a gun that plugs in. After reading the instructions carefully, we jumped into the primer coat.

img 58378 5

Cleanup is often cited as the biggest downside of owning a paint sprayer, so we used disposable bags in the paint cup to keep the unit cleaner and speed up the process afterward.

img 58378 6

We don’t have many process photos—one of us was watching Clara while the other sprayed—but the work moved quickly. We could run an entire room’s baseboards in about 10 to 15 minutes; most of that time was spent refilling paint.

img 58378 7

As others warned, spraying is much faster but consumes more paint. We could get through roughly two sides of a door per fill, so refilling was frequent. That said, the finish was incredibly satisfying—the old blue vanished quickly. Spraying often uses more paint than brushing because one sprayed coat can equal two brushed coats in terms of coverage.

img 58378 8

We’ll do a deeper, dedicated post on sprayer technique once we’re more practiced, but our main challenge now is resisting the urge to re-spray spots we think need touching up—over-spraying can easily cause drips. If you work slowly and avoid double-spraying, the factory-like smooth finish is impressive.

img 58378 9

img 58378 10

For the multi-pane windows we decided to paint by hand rather than risk overspray and drips on all the glass. In hindsight, that choice had trade-offs: hand-painting required careful scraping of paint from the glass with a razor and meant each blue or mauve window typically needed one coat of primer plus about three top coats of paint. It was time-consuming work.

img 58378 11

Spraying occupied two mornings—one for primer, another for paint—while hand-painting the windows and tricky details added a few extra sessions. The visual impact has been dramatic and gratifying.

img 58378 12

We didn’t bother taping the walls or floors around most of the sprayed areas, aside from outlets and a few vents. That means the walls are now in need of painting too, but that’s a separate project for another time.

img 58378 13

Some rooms—like the guest room and master—already had cream trim and doors, so they didn’t need primer. In total we used about two gallons of primer for the areas that required it: four rooms, four closets, nine windows, sixteen doors and a long hallway (roughly 30% of those elements were already cream).

img 58378 14

We ended up needing about 4.5 gallons of white paint. In hindsight, buying a five-gallon bucket at the start would have saved us multiple trips to the store. Live and learn.

img 58378 15

For paint we chose Benjamin Moore Ultra Spec in Simply White with a semi-gloss finish, a recommendation we’d received for trim work. It’s a contractor-grade, low-VOC formula and more affordable than some of Benjamin Moore’s other lines. We found it to be clear and crisp—neither too warm nor too cool—after comparing several white swatches.

img 58378 16

Here’s how the budget for this part of the project broke down:

  • Paint sprayer: $180
  • Primer, 2 gallons: $36 (sale price)
  • Paint, 5 gallons: $180 (leftover half-gallon for a future touch-up)
  • TOTAL: $396

It’s more than we initially expected, but because we’re on a schedule to install new hardwoods before moving in, painting the trim and doors quickly was worth the investment. Now that we own the sprayer we’ll use it for more projects around the house as we continue to update the remaining blue trim.

img 58378 17

Next up is rehanging the doors after replacing some of the old pitted brass hardware, and then installing the hardwood floors. We considered painting walls and ceilings while the subfloor was exposed, but with move day approaching we prefer to have finished floors in place—painted walls can wait and are easier to tackle later. That’s what we’ve been doing lately. What have you been up to?