Restore Shine to Dull Hardwood Floors
I almost forgot to mention that I cleaned and resealed the existing hardwood floors right before we moved in — literally about 26 hours before the move. The new hardwood upstairs looked so glossy that I didn’t want the floors in the office, living room, and dining room to feel outdated. So I gave them a little TLC.
The first step was to sweep up the random dust, old faux-Christmas-tree needles, and all the other debris left behind.

Not a bad pile for an otherwise empty room, right?

Next I used a recommended floor cleaner sold at big-box stores: Bona. I’d heard good things about it for cleaning and restoring older or dulled hardwoods that don’t need full refinishing but could use some moisture and polish to minimize small scratches and reseal the surface.

Here’s a close-up of the scuffs and minor wear I was targeting.

After sweeping, I sprayed the Bona cleaning solution and worked in sections with the mop fitted with the cleaning pad. This part was more work than a simple swipe—you actually scrub to get the dirt and old buildup out of the grain. It was surprisingly sweaty, so I’d rate the exertion about a 7 out of 10.

Once the floors were clean, I moved on to the sealing and polishing step. This is gentler: you use a polishing pad (more like lambswool) and spread the finish in a swiffer-like motion as you work out of the room. I had to MacGyver my mop head a bit — the part out of the box was wonky, so I reinforced it with painter’s tape.

You can clearly see the difference while working: the area I’d just polished looked moisturized and shiny, while the unpolished section remained dull and dry.

Unfortunately, once everything dried, some areas returned to a chalky, dull look. It may be related to the way our floors were originally refinished decades ago. The product had moments where the wet finish looked fantastic, but it didn’t hold once fully dry, so I decided not to continue with the remaining rooms using that same sealer.

I went back to the store and picked up a different product, Rejuvenate, available in satin and high gloss. Since the upstairs floors are high gloss and we like that look, I chose the high-gloss formula.

I continued using the Bona cleaner and mop with the cleaning head because they worked fine for the initial cleaning. For the sealer, though, I swapped to the polishing pad and applied the Rejuvenate floor restorer, working out of the room in the same way. Here’s how the room looked before applying Rejuvenate:

And here’s the room after the Rejuvenate application:

Rejuvenate went on more evenly and left the wood looking rich and sealed even after it dried. It didn’t go chalky, and I was able to apply two coats a few hours apart (Bona’s directions required a full 24-hour wait between coats). I even went back and re-coated the office with Rejuvenate instead of a second coat of the other product, and I was much happier with the final finish.
Here’s the dining room after everything dried — glossy and refreshed. The living room and office ended up with the same finish once I treated them with the Rejuvenate restorer.

Have you tried a floor cleaning and resealing system to revive dull, mildly scratched, or chalky hardwood floors? Did you test Bona, Rejuvenate, or another brand? Trying two different products side by side is a useful way to compare coverage, drying appearance, and long-term results.
Psst — we posted an update later about how the floors have held up over time; they were still looking good several months after treatment.
*This post contains affiliate links to products we purchased and liked*








