How to Install Exterior Trim: Caulk and Paint Guide
First, thank you for the amazing wave of congratulations on our announcement yesterday — it was so fun to share the news. We were overwhelmed (in a great way) by comments and questions, so while Sherry collects and answers many of them for Friday’s Q&A post, I wanted to share an update on the sunroom: how a few finishing steps — trim, caulk, and paint — turned a half-done space into something that feels genuinely finished.
These tasks aren’t the flashiest parts of a renovation, but they make a huge visual difference. Poorly fitted trim or sloppy caulk can undermine an otherwise beautiful room, so paying attention to the details matters. I originally planned to focus mostly on caulking and painting, but a trim decision we had to undo turned into a useful lesson worth sharing.

We needed trim to finish the tongue-and-groove beadboard ceiling we added. At first I reached for a slim 1×2 trim to match the room’s existing lattice-like detailing and used quarter-round against the brick. A chunkier 1×4 had been used lower on the triangle to hide rough patches left by removed trim. After stepping back, though, we realized the thinner pieces looked too delicate next to the heavier 1×4, so we made the call to replace the small pieces with 1x4s for consistent visual weight.

That meant pulling off and re-hanging trim just a day after installing it, but the result was worth the extra work. The room reads more cohesive with the same substantial profile around each triangle. Hanging long trim pieces on a ladder is easiest with two people: one holds the board while the other nails it in. I also ran a bead of wood glue behind each piece before nailing for extra hold.

Working around the triangular ceiling created some angled cuts. We used an angle finder — the same tool from our Kreg Crown Pro — to get accurate measurements from the triangle notches, transferred those angles to the boards, and cut them with a circular saw. Not every cut was perfect, but caulk fixed minor gaps, and the process moved fairly quickly, even with two sections re-done.




Once the trim was in, caulking came next. Because outdoor caulk is high in VOCs and Sherry is pregnant, I tackled this solo. Beyond caulking seams, I also filled every nail hole in the ceiling planks. It took a couple hours, but sealing those small gaps gives long-term protection against moisture and temperature changes.

My method became efficient: apply a small dot of caulk, press it in with a finger dipped in water (to prevent buildup), then smooth with a damp sponge. The sponge made the finish much cleaner and sped things up. The before-and-after photos don’t always capture the subtlety of caulked seams, but the ceiling now feels complete without those tiny visual distractions.

Painting followed. We kept things consistent by using Sherwin-Williams Snowbound for the trim to match our existing exterior white. Painting the door and three large 15-pane windows took the most time because of all the mullions, but two coats brought full coverage. I tried a specialty brush designed for window and trim work; in the end we found our usual short-handled brush was easier to control, but it was worth testing to be sure there wasn’t a magic tool we were missing.


With the windows and door painted, I rolled the walls with a small foam roller and used an angled brush for tight spots. Finally, I applied one more coat of the ceiling’s blue to hide any caulk “flashing” where the white caulk could be visible at certain angles. Ceiling painting isn’t our favorite task, but because this one didn’t require extensive edging and only needed a single coat, I finished it in about an hour while Clara was at preschool.




These finishing steps — upgrading trim for consistent scale, thorough caulking, and careful painting — helped turn a “completed” ceiling into one that truly looks finished. We’re still waiting on ceiling fans, but the visual transformation is striking when comparing the before and after photos.



We crossed two more items off the to-do list and are inching closer to the part we’re most excited about: tiling the floor. We hope to start that this week and share another update soon.
Rip up the old carpeting(more on that here)Remove the sliding doors and tracks to open things up(more on that here)Convert outlets to outdoor-safe, rain-proof units with covers(more on that here)Add fresh casing to openings and caulk thoroughly to waterproof everything(more on that here)Demo the old ceiling in hopes of lofting it (consult a pro)(more on that here)Remove old beams, reinforce ceiling framing, and re-route electrical for two fans(more on that here)Prime, paint, and install our beadboard ceiling(more on that here)Add trim around the ceiling and caulk/paint thatRepaint the columns & interior of the sunroom with white exterior paint (currently cream)- Hang two ceiling fans
- Tile the floors with outdoor-safe, slip-resistant tile (we’ve already chosen something)
- Buy a rug, furniture, and consider adding outdoor curtains and lanterns/sconces
- Plan a future outdoor fireplace
We went into this project expecting it to be quicker than a kitchen or bathroom, but sunroom work has proven just as involved: removing doors, redoing electrical, installing a new ceiling plank by plank, and painting countless mullions and trim. Still, each completed detail brings us closer to enjoying this space — one tile and one fan at a time.








