How to Paint Upper Kitchen Cabinets White
We woke up to a “white Christmas” of a different kind—no snow on the lawn, but a dusting of white across our kitchen cabinets. Last week we sanded, primed, and painted all of the upper cabinets, and in the end we chose white. It’s a bit of a return to what we did in our last kitchen, but only for the uppers. The lowers will follow a different path—likely a wood stain rather than paint—so our overall plan is still evolving as we head into 2014.

Originally we considered Revere Pewter or a light gray-tan for the uppers, but once we installed the white range hood and the floating shelves the balance felt off. White on the hood and shelves contrasted with putty-colored cabinets, while the darker lower cabinets would have introduced a third strong color—too much visual complexity for our taste. Choosing white for the uppers simplified the look and made it easier to create the “tuxedo” contrast we want when we paint or stain the lowers a deep tone.
Another practical reason we went white: crown molding. Normally crown is painted to match the cabinets, but in our kitchen the crown runs continuously with no obvious break where the cabinets end. Painting only a section to match colored uppers would have looked awkward, and the mismatched crown-cabinet combo we already had didn’t win us over. With white uppers, the crown reads more consistently and the room feels cleaner.

Here’s how we tackled the work. We followed the same method we used before—sanding, deglossing, priming, and painting—but kept this write-up shorter and focused on the main steps. First we removed all the doors and gave every surface a light sanding to dull the sheen and roughen the finish for better adhesion. Sherry used a hand sander with 150-grit paper on the doors in the garage, while I used a 150-grit sanding block on the cabinet frames inside.

After sanding we wiped everything with a liquid deglosser (we used a leftover low-VOC brand called Next). It’s optional, but it helps remove dust and further prepares the surface. Next we taped off walls and nearby fixtures—like the new hood—with painter’s tape to protect them and to speed up the many coats that were coming.

We primed the frames with brush and small foam roller, using Kilz Premium primer for stain-blocking performance and its low-VOC formula. Sherry handled the cutting-in with a 2″ angled brush while I followed with the roller to smooth the brushed edges—this combination gives a nearly brushless look without the overspray.

We debated spraying the interior frames but ultimately painted them by hand. The taping, drop cloths, and overspray risk in the adjacent rooms weren’t worth it, especially with a pregnant family member and a young child around. However, we did use a sprayer in the garage for the cabinet doors—spraying yields a smooth, factory-like finish and is faster once you’ve mastered the technique.

When spraying doors, it’s smart to practice first so you don’t end up with drips or heavy spots. I sprayed one side, let each door dry 24 hours, then flipped and sprayed the other side. Spraying demands more paint and frequent sprayer cleaning between coats, but the coverage is thicker and very even.

For areas painted by hand, we did two coats of primer and three coats of paint. We used Benjamin Moore Advance in Simply White for its cabinet-friendly formula: durable, self-leveling, and low-VOC. The doors sprayed in the garage needed only one coat of primer and one coat of paint per side thanks to the heavier, more even application from the sprayer.

Overall timeline: one week from start to finish. Day 1: sanding, deglossing, primer coat #1. Day 2: primer coat #2. Days 3–5: three paint coats. Day 6: drying. Day 7: re-hang doors and install new hardware. Some drawer fronts and shelves were painted in place because they didn’t detach easily; we used small pieces of tape to keep paint off shelf interiors for a clean edge.

We replaced the old worn brass hinges with oil-rubbed bronze (ORB) and primed the hinges with a clean-metal primer before coating them—this helps paint adhere and hold up on moving parts. So far the hinges operate smoothly with no gumming, peeling, or grinding. While hidden hinges would be ideal, the cabinet doors are half-sunk and off-the-shelf hidden options aren’t compatible, so that upgrade will wait for Phase 2.

We also swapped the knobs for simple octagon knobs (the same style we used in our master bathroom) to keep the look crisp and affordable. The high-contrast ORB hardware against the white doors creates a graphic, modern feel that we’ve been gravitating toward in several updates.

These changes already make the kitchen feel more like home, even with the faux brick floor, old countertops, and off-white appliances still in place. The before-and-after shots from the sink area show the impact a fresh cabinet color can have on the whole room.

Next up: the lower cabinets. We’d planned a deep stone-colored paint, but now that the uppers are white we’re leaning toward staining the lowers to let the wood tone play against the bright upper cabinets. So the plan continues to evolve: painted uppers in Benjamin Moore Simply White and stained lowers for contrast—tuxedo-style.


Affordable updates—stripping wallpaper, removing or modifying a few cabinets, adding shelves, and priming and painting cabinets—can make a dramatic difference. Did you tackle any projects over the holiday week, or were you busy with cookies and movies? We’d love to hear what you chose to do with your time.
Psst—Sherry’s over on Young House Life talking about New Kids On The Block and teacher gifts.








