DIY Wooden Cubby Shelf for Kids’ Room
Clara’s Figurine Cubby: A DIY Wall Shelf for Little Toys
We usually race against the clock finishing Clara’s homemade Christmas present—sometimes literally gluing and drying things in the garage on Christmas Eve. This year was no different, but the best part is seeing her enjoy the gift afterward. Meet Clara’s new figurine cubby, a compact wall-hanging shelf built to hold her tiny toys and keep them off the floor.

She loves it.

We considered several big ideas—a play workshop, a fruit stand, even a cardboard playhouse—but ultimately wanted something small and vertical so it wouldn’t eat up floor space. Clara still uses the larger items we’ve made her (her play kitchen, refrigerator, dollhouse, and train board), so we focused on something that could hang on the wall and cater to her clear love of little figures.

She adores tiny animals, fairies, LEGO people, ninja turtles, dragons—anything small she can collect and arrange. To give those toys a proper home, we designed a 13″ x 17″ cubby box with a variety of compartment sizes so she could both store and play with her figures.

The plan included a personal touch: fabric panels from Clara’s own photo project to make the cubby feel custom and special. She picked out fabrics beforehand without knowing exactly how they would be used, so it was a fun surprise for her to recognize her choices when she opened the gift.

We chose a wall spot below her blue clock where she already liked to perch a few figures. We sketched shelf layouts and debated uniform cubbies versus mixed sizes. Since she groups some figures together and keeps others separate, we opted for varied compartment sizes to accommodate single favorites, small groups, and taller toys.

For materials we bought several sheets of 1/2″ craft board from a home center—about $20 total, including a bit extra for mistakes—and cut the top, bottom, sides, and assorted divider pieces. The outer frame was glued and secured with 1/2″ brad nails. To keep corners square while nailing, we pressed the frame against a box corner, which helped brace it while using the nail gun.

Before finishing assembly, we tested the interior spacing using a handful of Clara’s toys to ensure compartments fit as intended. We made a few on-the-fly adjustments and cut additional divider pieces where needed.

Construction proceeded from the bottom up. With a simple spacer, we positioned the first row of vertical dividers, glued and nailed them from the bottom, then added the first horizontal shelf and secured it from the top. After letting that first section dry overnight, we added the next row in the same way until all internal pieces were attached.


We finished the frame by adding the remaining outer piece, then attached a thin piece of leftover plywood as the back panel with glue and nails—a step a lot like installing the back of an Ikea bookcase. After sanding, we primed the cubby and applied two coats of semi-gloss white paint. In hindsight, painting the parts before attaching the back would have been slightly easier, but the outcome was the same: a clean, durable finish.


With the paint dry, Clara helped choose fabric panels. She knew exactly which one she wanted—“the one with the pink flamingos”—and picked several other favorites while dismissing others with a quick “nope” or “next.” To keep the design balanced, we decided to cover roughly half of the cubbies with fabric and leave the rest painted white.

On Christmas Eve I made paper templates for the cubby backs and cut the fabric pieces to size. Instead of starch, I used Mod Podge to adhere the fabric—painting Mod Podge onto the cubby back, positioning the fabric carefully, and smoothing out wrinkles. It bonded quickly: within about 30 minutes each panel was dry and secure.

On Christmas morning Clara was thrilled. She loved that her little figurines now had a dedicated place and that we used the fabrics she picked. Being part of the process—especially in her own room—clearly made the gift more meaningful. Her delighted “You remembered my flamingos!” was priceless.

She uses the cubbies both as a playset and as storage. Sometimes she stages little “apartments” inside the compartments, and other times she pulls out the figures to play elsewhere and then returns them to their cubby homes when she’s finished.

The project cost about $20 for the wood; if you don’t already have glue, paint, or Mod Podge it could add another $5–$20. To hang the cubby, we attached two D-rings to the back and hung it from screws anchored into the wall for a secure hold.

If you make a similar cubby, vary the compartment sizes to suit the toys you know will live there, test fit pieces during construction, and consider adding fabric or wallpaper to some sections for a playful, personalized look. Homemade gifts that include a child’s input can be small to build but huge on delight.









