Objectales

Popular

How to Paint a Refrigerator with Appliance Paint: Step-by-Step

featured 63753

We updated our refrigerator — it’s white now.

painted white refrigerator in nelson blue kitchen

This isn’t a new appliance, just our old almond-colored fridge given a quick refresh with appliance paint so it would coordinate better with our white cabinets. After dozens of readers recommended appliance paint in this post, we decided to try it ourselves.

old yellow refrigerator before painting

I’ll admit I was skeptical at first, but the positive feedback convinced us it was worth a shot. If it worked, the fridge would blend with the kitchen until we’re ready to replace it in Phase 2 of our renovation. If it didn’t, we’d share the results and save anyone else from repeating the mistake.

We chose a Specialty Appliance Epoxy from Home Depot — a gloss white epoxy that cost about $15 and came in the exact shade we needed. We passed on chalkboard paint because we didn’t want dust near our food, and we figured a white finish would be more broadly appealing if we ever resold the appliance.

rust-oleum appliance epoxy can

The painting itself was straightforward; the prep was the hard part. We moved the fridge outside to avoid filling the house with the epoxy’s strong smell (it reminded us of rubber cement), and followed the can’s advice to work in a well-ventilated area and wear a mask. After turning off and disconnecting the water line, my dad and I wrestled the fridge onto a dolly — until we discovered the handles made it too wide to fit through the doorway.

rolling refrigerator through backdoor of house

We removed the handles (and one door) so we could squeeze the fridge outside. To save time and effort, we left most of the food inside, removing only heavy or fragile items for transport. It was awkward but effective — and yes, we plugged the fridge in outside so nothing spoiled.

fitting refrigerator through doorway with door removed

refrigerator on back porch for painting

We waited until the weekend when daytime temperatures reached the epoxy’s recommended range. Sherry removed both handles before painting so the finish would be seamless and drip-free. The handles came off easily by popping off small covers and unscrewing them.

removing handles from refrigerator for painting

Following the can’s instructions, we lightly sanded the entire fridge just to dull the gloss — 150-grit sanding blocks worked well. A damp cloth removed sanding dust, then we dried the surface thoroughly.

sanding fridge in preparation for paint

I used a foam roller to apply the epoxy while wearing a mask, and Sherry, Burger, and Clara stayed inside to avoid the fumes. The epoxy spreads like paint, goes on slightly bubbly, and levels out quickly. I used a small brush for tight spots like door seams and the ice dispenser trim. We painted right over the front trim — covering the old “Hot Point” logo — but avoided any components that touch water or ice directly.

how to paint refrigerator white with roller

how to paint a refrigerator

We painted three sides and the top, leaving the back untouched because of cords and vents. Sherry laid out the handles, hinge covers, and grille on cardboard so I could coat them separately and reduce drips on the main surface.

rolling refrigerator with appliance epoxy

supplies for how to paint a refrigerator

The can suggested recoating after an hour at 70°F, but because it was cooler on the first day we let it cure overnight and rolled a second coat the next morning when temperatures climbed. The finish dried to a hard, glossy surface that blends surprisingly well with the cabinetry.

refrigerator drying on back porch after painting

second coat of appliance epoxy on refrigerator

We brought the fridge back inside after the final coat had dried. The color isn’t a perfect match to every white in the room — it’s a shade brighter than our cabinets — but it no longer clashes the way the old cream color did. The gloss epoxy retained the subtle texture of the original finish, so the result looks authentic, like a factory finish.

painted white refrigerator

before picture of painted refrigerator

close up detail of how to paint a refrigerator

The epoxy feels solid and smooth — convincingly like factory-applied enamel. From what we’ve read and heard, this finish can last five years or more, which is plenty for our plans; we hope to move on to Phase 2 sooner than that. Even if it gets a nick or two, it’s a cheap, effective way to update the kitchen for about $15 and a weekend of work.

diy refrigerator paint job

Have you used appliance paint? We’ve heard stoves require high-heat paint, usually available as spray, and we considered painting the handles an accent color like navy, but decided to keep things simple so the fridge would fade into the background and let our other design choices — succulent art, a rope chandelier, and a rustic dining table — stand out instead.