This week I was inspired by a casual comment from Clara, relayed through John’s mom. She overheard Clara telling her cousin she didn’t have a clock in her room, and the idea stuck with me. I’d never made a clock before, but it sounded like a fun, doable project — something a child could interact with and enjoy every day.
Here’s what I created for Clara and how it all came together.
Now it happily hangs on the wall in Clara’s room, adding both function and a bit of whimsy.
At first I considered using a decorative birdhouse and attaching clock hands to it, but most birdhouses protrude from the wall and don’t provide a flat face for clock hands to rotate freely. I settled on a simple house-shaped design that suggested a cuckoo clock, then adapted it with my own 3D details and hand-drawn accents to keep it playful and unique for Clara.
For the base I picked up a 12 x 12″ sheet of 1/4″ plywood from the craft store. It was economical and light — easy to cut down to a house shape with a miter saw. If you don’t have a saw, this thin plywood can also be scored repeatedly with a craft knife and snapped cleanly.
I also collected a few inexpensive embellishments: a small picket fence, a bag of wooden disks, and a thin trim piece for a roofline. Using craft glue and a few tiny nails, I built a little bottom ledge and a smaller shelf about three inches below the roofline. I glued the trim along the top to form a roof-like edge and added a round wooden disk beneath it to mimic a circular window.
The tiny picket fence was a favorite detail. I glued it to the bottom ledge and reinforced it with small picture nails so it wrapped around neatly and felt sturdy.
Next I marked the center where the clock hands would go and drilled a hole large enough for the clock mechanism spindle to pass through. This required gradually increasing drill bit sizes until the spindle fit snugly.
Painting came next. I asked Clara what color she wanted — expecting pink — and she surprised me by choosing blue. I used a leftover small paint sample and applied two even coats for a smooth finish.
When the paint dried I sketched the clock face and decorative details with a white paint pen. I used a coaster to trace a neat circular face and free-handed windows, window boxes, and plant stems. The imperfect, sketchy style feels charming and homemade, and it gave me the freedom to add little touches like flowers with a red marker.
Once the paint pen dried I assembled the clock kit. The kit was simple: insert the mechanism in the back, push the spindle through the front hole, and secure the decorative spire and hands with the provided washers and nuts. I left the clock hands in their vintage-gold finish because the color complemented the cuckoo-clock vibe I was going for.
On the back I glued three small blocks of scrap wood to make the clock sit evenly off the wall, since the mechanism sticks out and I wanted the piece to hang flush. I added a metal picture hanger to the top block so the whole clock could be mounted securely on the wall.
I also glued a short piece of leftover trim at the base of the upper shelf with a larger wooden disk at its end to suggest a little pendulum ledge. It doesn’t swing, but it contributes to the quaint cuckoo-clock look and gives Clara a place for her tiny toys.
The entire project — shopping, cutting, gluing, drilling, painting, sketching, and assembling — took roughly two hours. The cost was modest: under $15 total including the clock kit, plywood backing, and the small decorative pieces.
This ended up being one of those simple, charming craft projects that also make thoughtful gifts. If you wanted to simplify, you could skip the extra shelves and fence, or paint the clock a solid color and add metallic accents with a paint pen for a streamlined look that would be even cheaper to produce.
The best part is how much Clara loves it. She enjoys arranging small animals and figurines on the shelves, so we made a little nightly ritual out of it: before bed she tells us who she wants on the top shelf and who goes on the bottom, we place them, and then tuck her in. It’s become a sweet routine and a special way to use the clock beyond just telling time.
If you decide to try a similar project, the trickiest step is usually drilling the center hole large enough for the spindle — but that’s easily solved by starting with a small bit and working up until the spindle fits comfortably. Overall, it’s a fun, affordable DIY that adds personality to a child’s room and gives them something interactive to enjoy every day.