Objectales

Popular

Install New Hallway Lights: Wiring, Placement, and Tips

featured 64093

From the moment we first saw this house, something about the view of three lights arranged in a row in the upstairs hallway made us inexplicably excited. Call it the “tri‑light zone” effect — we could tell that the arrangement had serious potential, once we looked past the old carpeting and the bright blue trim.

img 64093 1

The existing fixtures were undersized for the space (this hallway is actually about 33 feet long), so we considered spray‑painting them—oil‑rubbed bronze, red, navy—but I worried that would push them toward a gothic look we didn’t want. Also, all three were crooked, one had a broken stem, and the middle fixture was noticeably larger than the others.

img 64093 2

I’ve had a specific style of lantern in mind ever since I saw it in a House Crashing project back in 2012. I like that it blends classic and modern elements: the dark finish provides contrast without feeling heavy because of all the glass. Sherry was on board, which can be rare when it comes to lighting, but the $250 price tag per fixture was a bit steep since we needed three.

img 64093 3

We kept an eye out at local outlets, Craigslist and the ReStore for similar pendant lanterns, but finding three identical fixtures proved difficult. Then Sherry spotted a sale at a national retailer, and after the discount the lanterns were about $75 each — suddenly we could afford three for less than one of our original inspiration fixtures.

img 64093 4

Normally I don’t repeat installation steps in detail, but watching a pro at a showhouse taught me a couple of small but useful tricks. Trick #1: leave the protective packaging on during most of the installation. I used to rip off all the cardboard and styrofoam the moment a fixture arrived, but the electrician kept whatever packaging didn’t interfere with the mounting in place while he worked. It prevents damage during handling and makes the process less nerve‑wracking; of course the packaging comes off before powering the light or installing bulbs.

img 64093 5

We would have liked the pendants to hang lower on their chains, but with 8‑foot ceilings that wasn’t possible. We shortened the chain by prying links open with two pairs of pliers; I wrapped the plier tips in masking tape to avoid scratching the finish. The previous middle fixture had hung fairly low for my six‑foot frame, so we decided to hang the new lights by a single chain link. That raised each lantern slightly higher than the old middle light — the bottoms now sit around 77 inches from the floor.

img 64093 6

I kept one chain link handy but left a longer length on the fixture while I worked. In addition to shortening the chain, I had to shorten the cord. I opened the outer wire covering, removed the excess, and stripped the ends of the black, white and green wires in preparation for wiring.

img 64093 7

With Sherry supporting the fixture, I matched and connected the wires to the ceiling wiring. We kept the power off during this step, so photos are a little grainy since lighting was limited up there.

img 64093 8

The second trick I picked up was to hang the fixture low first, then raise it to the final height. It’s generally easier to lift a fixture and remove chain links or tuck more wire into the ceiling than it is to lower it after you’ve already cut the wire. This approach made the wiring step less cramped and allowed Sherry to support the fixture at a comfortable height while I worked above.

img 64093 9

Once everything was secured, I swapped the longer chain for a single link and tucked the excess wire into the canopy. I tightened the screw that clamps the wire in place and made sure the canopy sat flush against the ceiling.

img 64093 10

Installing all three fixtures took a few hours — perhaps around three, though I was frequently stopping to take photos and answer a few calls. The end result, however, is worth the time.

img 64093 11

Like the light in our foyer, these pendants add a bold contrast that helps tie together the dark door hinges, doorknobs, and stained stair rail. They are slightly oversized for the hallway, which some people might dislike, but that scale is exactly what we love about them — they make a deliberate design statement.

img 64093 12

We plan additional hallway updates to bring more balance and substance to the space. Remaining tasks include:

  • Reinstalling and possibly modifying the laundry area doors
  • Adding crown molding (those angles will be a challenge)
  • Installing substantial wainscoting to add weight and interest to the lower walls
  • Selecting and hanging artwork to personalize the corridor

For comparison, here’s a before shot of the hallway.

img 64093 14

I worried the hallway might be darker with three single‑bulb fixtures replacing three triple‑bulb fixtures, but the new lamps accept higher‑wattage bulbs (60W equivalent) and the glass reflects light so effectively that the space actually feels brighter. It probably helped that several of the old bulbs were burned out as well.

img 64093 15

The clear bulbs that came with the fixtures cast interesting angular shadows on the ceiling. If we want a softer look we can switch to frosted bulbs, and our plan is to transition the house to LEDs for better energy efficiency and longer life. LEDs now offer warm, natural light while using far less energy than traditional bulbs.

*Note: some product references in the original post linked to retailers.