How to Hide TV Wires in the Wall: In-Wall Wiring Guide
Our recently finished bonus room upstairs wasn’t intended as a dedicated media or theater room, but it quickly became the perfect spot for family movie nights. We wanted a clean look without a tangle of cords, so we mounted the TV on the wall, concealed every visible cable, and hid the cable box. Below are the four straightforward steps we followed to achieve a tidy, professional result.

All told, these upgrades cost under $75 and none took more than an hour; a couple of them only took minutes. The project steps were:
- Mount the TV to the wall
- Install an in-wall cord system
- Raise the power strip off the floor
- Add an infrared (IR) receiver so the cable box can be hidden
Before tackling the wiring, we chose a wall that made sense for viewing and sound: it was the only wall without windows or a sloped ceiling and sat across from the built-ins we installed elsewhere in the room. It also faces away from the door, which keeps sound from traveling down the hall.

We bought a 50″ Vizio TV earlier in the year, and then tracked down a mid-century nine-drawer dresser on Craigslist to serve as our media console. The dresser needed cosmetic work, so we sanded, primed with a tinted primer we already had, and painted it Folkstone by Sherwin-Williams. After letting the paint cure for several days, we installed new hardware and set up the electronics.

At first the TV sat on the dresser, but the exposed feet and cables looked messy. Mounting the television on the wall was the first and most important change to create a clean, modern look.

1. Mounting the TV to the wall
Mounting the TV was easier than I expected. We attached mounting brackets to the back of the TV, secured a backplate to wall studs, and then hung the set on the bracket. Use a stud finder, a level, and strong mounting hardware rated for your TV’s size and weight. Once the bracket is anchored securely to studs, the TV locks into place and the result is sleeker and safer than leaving it on a dresser.

2. Installing an in-wall cord system
With the TV mounted, the next priority was concealing the power cord and HDMI cable. We installed an in-wall cord kit that creates a discreet channel between the TV and the media console. The kit requires drilling two holes: one behind the TV and another behind the console. A narrow plastic tube runs between the holes so you can feed power and signal cables safely through the wall cavity.

The kit includes a hole saw attachment for perfectly sized openings and a recessed in-wall power receptacle that installs behind the TV. The lower end of the kit provides a matching receptacle behind the dresser so you can plug the other end into a standard outlet. Cut the supplied tubing to length, feed it through the wall, and secure the plastic plates to the drywall with the provided screws for a clean recessed connection.

Feeding the tube through the wall can require some patience—move insulation aside and keep your hole near a stud edge so the tube can slide easily. The final look is a recessed outlet and tidy openings that keep cords out of sight while complying with a safe pathway for power and low-voltage cables.

3. Getting the power strip off the floor
Even after routing the main cords through the wall, extra cable length and power strips can end up in a messy pile behind the console. A simple and effective solution is to mount the power strip off the floor on the back of the dresser. Most power strips have keyhole slots or mounting points so you can secure them with two screws. Mounting the strip raises everything off the floor, creates a small shelf for excess cord, improves airflow, and keeps cords accessible but hidden.

4. Adding an infrared receiver
To hide the cable box while keeping remote control functionality, install an infrared (IR) receiver. An IR receiver plugs into the cable box and places a small, unobtrusive sensor where the remote can reach it. We tucked the cable box inside a middle drawer of the dresser, routed the power cord, HDMI cable, and IR receiver through a hole we drilled in the back, and added ventilation holes for airflow. With the sensor exposed, the remote works as if the box were on display, but the hardware is neatly concealed.


With the TV mounted, wires routed through the wall, the power strip secured, and the cable box hidden with an IR receiver, the finished wall is clean and distraction-free. We still have decorative details and furniture placement to finalize, but the essential function—neat cable management and a mounted TV—was complete and effective.

To complement the TV wall, we’re adding a few keeper pieces around the room, including a mobile for visual interest, long ivory curtains on oil-rubbed bronze rods, and a colorful area rug to bring warmth and personality to the space. The balance of form and function is exactly what we were aiming for: a family-friendly bonus room that looks pulled together and performs well for movie nights.

Note: some product names and references were mentioned for context; choose components and kits rated for your TV size and local electrical codes when installing in-wall power or working with household wiring.
*This page previously referenced items we purchased and favor; consider supplier details and compatibility when shopping for parts.*








