Objectales

Popular

Turn One Duvet Cover Into Two: DIY Sewing Guide

featured 78271

How I Turned One Boy’s Duvet Cover into Two: A Simple DIY Sewing Guide

It’s me again—Sherry, self-declared mediocre seamstress—sharing another project that involved equal parts frustration and triumph. My friend inherited a patterned duvet cover many years ago, and when her family moved into a house with two twin beds, she suddenly needed a matching second cover. Rather than buying a new set, I offered to try converting the single duvet cover into two usable covers. The result: two matching duvet covers made from one original cover plus two flat sheets.

boys duvet cover Split-Duvet-After-Straight-Vertical

The process is straightforward and uses basic sewing skills: carefully separate the front and back of the original duvet cover, pair each half with a flat sheet of similar fabric, trim and hem the sheets to size, stitch the three closed sides, and finish the openings with buttons or hand-sewn buttonholes. Below I break down each step so you can replicate this DIY duvet cover hack for a matching set without buying new covers.

Materials

  • One reversible patterned duvet cover (with buttons or buttonholes along one edge)
  • Two flat sheets in a similar fabric (100% cotton recommended)
  • Basic sewing supplies: sewing machine, thread, scissors or seam ripper, needle for hand sewing
  • Buttons (recycled from old garments or new)

Split-Duvet-Cutting-Apart

Step One: Separate the Duvet Cover

Start by opening the original duvet cover along the seam that joins the patterned front to the plain back. Use a seam ripper or small scissors and work slowly around the perimeter so you don’t accidentally cut the fabric. You’ll end up with two matching panels: one with buttons and one with buttonholes (or both with raw edges if the cover was fully closed). This is the scariest part because you are literally taking someone’s duvet apart, but go slowly and you’ll be fine.

Split-Duvet-Halved-Duvet-Sheet-Sets

Step Two: Prepare and Match Flat Sheets

Choose flat sheets made of a similar material—I used white cotton flat sheets because cotton pairs well with cotton and minimizes puckering. Buy sheets one size larger than the duvet panel you’ll be covering so you have enough material to trim and hem. Prewash and dry the sheets a few times to remove any initial shrinkage.

Lay the flat sheet flat and place one duvet panel on top. Trim the sheet to match the duvet panel’s dimensions, leaving an extra inch on any edges you cut. Hem those raw edges by folding the extra inch under and stitching it down. Hemming before assembly prevents fraying and gives a clean finished look.

Split-Duvet-Laid-On-Ground-Chihuahua-Inspecting

Step Three: Sew Panels Together

With the duvet panel turned pattern-side up, place the sheet face-down on top, aligning edges. Stitch three of the four sides together (leave the short side with the original buttons or buttonholes open). Sew inside out so the seams are hidden when you turn the new cover right side out. When you flip it, you’ll have a neat, pillowcase-style duvet cover that holds a duvet insert securely.

Split-Duvet-Sewing-Machine

Step Four: Adjust the Opening

The original cover usually left a partial opening in the middle of one side. To mimic that, turn the assembled cover back inside out and stitch the outer corners of that side closed, leaving a central gap that is roughly one-third of the side’s length. This gap is where you’ll fasten the cover closed once the duvet insert is inside.

Step Five: Add Buttons

Because splitting the original cover separates buttons from buttonholes, you’ll likely have one cover with buttons and one with buttonholes. For the side that needs buttons, sew them onto the inside hem of the sheet so the closure hides behind a folded flap once buttoned—this creates a clean finished appearance and prevents the buttons from showing on the outside.

Split-Duvet-After-Hands-Buttoning

Step Six: Make Buttonholes

If you need to recreate buttonholes, you can make small slits and reinforce the edges with tight hand stitches or a buttonhole stitch on your machine if available. I hand-stitched around the slits with dense looped knots to prevent fraying, effectively recreating the original reinforced buttonhole. It doesn’t have to look factory-perfect; it only needs to be durable and functional.

Split-Duvet-Button-Hole-Cut-On-White

Split-Duvet-Button-Hole-Sewed

Once the buttons and buttonholes are in place and you’ve turned the covers right side out, button them up and tuck the insert in. The finished covers look tidy and coordinated, and the sewn seams hide nicely once the duvet is filled and fluffed.

Split-Duvet-After-Hands-Clear-Buttons

The whole project took a mix of patience, slow seam ripping, careful measuring, and a few improvised stitches. It’s a practical way to repurpose a beloved duvet cover and achieve a matching set without spending money on replacements.

Split-Duvet-After-Side-Of-One-450

Also worth noting: her son is obsessed with dinosaurs and can rattle off names by the dozens. Decorating the room around the duvet pattern was mostly about using what they already had—a rug, a woven side table, and a few playful wall pieces and a T‑Rex lamp to complete the look.

Split-Duvet-After-Straight-Vertical

Split-Duvet-After-Fold-Down-Detail

More Sewing Projects

If you enjoy practical sewing and DIY home projects, try these ideas next:

  • Sewed a patchwork quilt
  • Made a small stitched quilt for a child
  • Created a beanbag pouf
  • Made curtain panels
  • Turned cloth napkins into accent pillows
  • Constructed a drapey pom‑pom canopy

*This post originally referenced sourcing and affiliate options; links and product references have been removed for clarity.