Objectales

Popular

Hardwood Floor Refinishing Before and After Photos

featured 80034

The new hardwood floors in our kitchen can be easy to overlook among the bigger renovations (a new layout, a wider opening to the living room, new cabinets and countertops). Yet they’re a major reason the space — and the entire first floor — now feels bright, open, and refreshed. To help anyone considering a similar update, here’s a clear recap of the whole process, including timing and cost.

img 80034 1

This before shot shows how dramatic the change is. The photo below was taken from the exact same spot as the after photo above — and we do not miss that faux brick linoleum.

img 80034 2

Viewed from the front door, you can see how disjointed the downstairs flooring used to be. We had hardwood in three rooms — the living room, dining room, and office — but those areas were separated by slate in the foyer and linoleum in the kitchen. In total there were five transitions between different floor types, often bridged with a metal strip that made for several stubbed toes. The goal was to make everything feel continuous and cohesive.

img 80034 3

Now it’s one uninterrupted expanse of hardwood — no transitions, no steps, no color changes, and no visual evidence that it wasn’t always this way. Hardwood in the kitchen adds warmth, and matching flooring across several rooms improves flow and makes the whole floorplan feel larger. Getting there, however, wasn’t especially quick or painless.

We decided to hire professionals because the project spanned several weeks and we didn’t want our kitchen out of commission for longer than necessary. While we’ve installed prefinished hardwood ourselves upstairs in the past (read about that here), blending new boards with existing, then sanding and staining to match perfectly, was best left to pros. We worked with a local company we trusted, Howdyshell Flooring, which made the process smoother.

img 80034 4

Demo

First step: removing the linoleum and slate. Howdyshell quoted the slate demo and estimated their team could remove it in about a day, including the temporary removal and reinstallation of quarter round and plumbing fixtures like the powder room sink and toilet. Renting the right tools and dealing with the noise and dust made hiring them a clear choice. The crew took about a day and a half to remove everything, leaving exposed plywood in the foyer, half bath, and kitchen. Fortunately the subfloor was in good shape and didn’t need repairs.

img 80034 5

You can see bits of the original hardwood from the living room extending into the kitchen. Those odd sections revealed the footprint of the old wet bar and a built-in bookcase where the floor was never stained. Matching the new hardwood seamlessly to those areas was one reason we avoided a DIY approach — any uneven or mismatched boards would have been very visible in a high-traffic doorway.

img 80034 6

To ensure a seamless transition, the installers removed some existing planks and staggered the new boards rather than running a straight line where old and new met. You can see faint outlines on the subfloor where pieces were cut and adjusted to blend the floors.

img 80034 9

Installation

With the old flooring out, the crew patched in new boards and used wood putty to fill any small gaps or damage from removing the old planks. After feathering the new boards into the existing floor, two installers spent a full day laying the new hardwood across the kitchen. The wood had been delivered a week earlier so it could acclimate to our home’s humidity — a critical step to prevent gaps or buckling later.

img 80034 10

They finished the kitchen on the second day, then moved on to the foyer, half bath, and closets on the third day. For doorways where the new boards couldn’t be guaranteed to line up with existing floors, we chose “turnboards”: two planks set perpendicular at the threshold. They’re flush with the floor, walkable, and — once stained — became a clean decorative detail replacing the old metal strips.

img 80034 14

Although it might sound counterintuitive, the installers preferred that cabinets be installed before sanding and staining. Cabinet installation can be tough on new floors, and putting the cabinets in first reduces the chance of scratching a freshly sealed finish. It also allowed counters to be templated and produced while the floors were drying, which compressed the overall project timeline.

img 80034 15

Moving Out

After the cabinets went in, we had to clear the entire first floor. We moved much of the kitchen into the dining room, placed smaller items upstairs, and kept appliances in the garage. For large pieces we rented a small storage pod and moved everything in one day. It was a hassle, but ultimately worth it.

img 80034 16

We also noticed wear marks in the office from wheeled chairs. We addressed that as part of the refinishing and later made a simple modification to our chairs to prevent recurring damage.

img 80034 17

Sanding

Sanding removes the old finish and smooths the whole surface. It’s extremely dusty despite dust-mitigation equipment, so we set up a sealed-off area upstairs to live in temporarily. Two installers handled sanding: one with the big drum sander for the fields and another with an edging sander for the trim areas. The dark lines you see around baseboards in photos are temporary gaps where quarter round had been removed and will be replaced after finishing.

img 80034 20

Staining & Sealing

We matched stain color to our existing stair treads. After testing Jacobean, Special Walnut, Provencial, and a Jacobean/Provencial blend, we chose Provencial as the closest match and a classic medium tone. Because staining and sealing require days of drying, we stayed with family and took a short trip while the crew applied three coats of polyurethane, lightly sanding between coats. The unstained floors looked patchy at first, but the sealer deepened and evened the color. We selected a satin finish for the final look. Installers recommended waiting 48 hours before walking on the new finish and about ten days before placing heavy furniture or rugs to avoid impressions.

img 80034 24

Moving Back In

We spent extra time cleaning sanding dust and touching up paint and quarter round before moving furniture back. From demo to being able to walk on the floors took roughly 16 days; we waited another ten days before returning heavy furniture. No furniture fell off the dolly during the move-back-in, so that felt like a win.

img 80034 29

The transition between the new kitchen floors and the existing living room hardwood is virtually undetectable. In person, guests are surprised it wasn’t always this way. We also appreciate the foyer now: hardwood is warmer and smoother than the old slate and is kinder to little knees.

img 80034 30

To protect the office floor from future wear, we removed the casters from our rolling chairs and attached furniture pads. They still move and swivel easily but no longer create “donut” wear marks.

img 80034 33

Cost and scope: materials (3/4″ solid oak hardwood flooring for three rooms) were about $3,400. Labor — which covered demo, removal and reinstallation of quarter round and plumbing, laying and patching hardwood, sanding, staining and sealing the entire first floor, and reinstalling plumbing and quarter round — was about $4,100. UPDATE: Our entire first floor is roughly 1,300 square feet, with about half (~650 sq ft) being existing hardwood and the other half (~650 sq ft) replaced with new hardwood.

img 80034 34

Would we do it again? Absolutely. It required time, inconvenience, and a serious expense, but the result — a cohesive, warm, and finished first floor — made the effort worthwhile. We’re also relieved that future refinishes, like at the beach house, won’t require us to move out while work is underway.

More Hardwood Floor Refinishing Projects

If you’d like to read more about our hardwood refinishing work — from matching original hardwoods to installing prefinished flooring and restoring century-old pine — check out these posts.

  • Refinishing Mid-Century Oak Floors in Our First House
  • Refinishing Historic Heart Pine Floors in Our Beach House
  • Repairing Historic Oak & Pine Floors In Our Duplex
  • Clear Sealing Our Refinished Floors In Our Florida House