Objectales

Popular

How to Refinish a Clawfoot Tub: DIY Reglazing Guide

featured 84060

We were determined to refinish the old, stained clawfoot tub in our beach house bathroom ourselves. Hiring a professional reglazer felt intimidating (it’s heavy and awkward to move), so we committed to a DIY approach. To our surprise it was straightforward, cost roughly $50 in materials, and mainly required elbow grease. Below I’ll share what worked, what didn’t, and the exact process we used to bring this tub back to life.

Before and after of refinished navy blue clawfoot tub
Side by side before and after of cleaned inside of antique clawfoot tub

Finding an Old Tub

This clawfoot tub came with the beach house when we bought it, though its condition was rough and the surrounding room needed major work. If you’re hunting for a vintage tub, check local architectural salvage shops or marketplaces that sell reclaimed fixtures. Buying and moving a used cast-iron tub does add cost, but can still be far less than purchasing a brand-new tub—and it comes with character.

Before photo of beach house bathroom with crumbling walls and dirty tub

We waited until the rest of the bathroom rebuild was nearly finished before tackling the tub. Below is a clear step-by-step of how we restored both the inside and the outside surfaces.

Materials for Refinishing a Clawfoot Tub

Most tubs need attention on two fronts: the interior, which is mostly cleaning and stain removal, and the exterior, which is primarily sanding and painting.

For the interior (cleaning and minor repairs), you should confirm there are no holes, deep cracks, or extensive flaking that would require professional repair. Useful items include:

  • Soft sponge
  • Scouring pads
  • Spray bottle
  • Bar Keeper’s Friend or other soft-surface cleanser
  • Heavy-duty Magic Erasers
  • Fine-grade steel wool (#0)
  • Optional: bathtub and tile refinishing kit (DIY epoxy)
  • Optional: painter’s multi-tool, gloves

For the exterior (sanding and painting), the tools we used were:

  • Coarse, medium, and fine-grit sanding blocks
  • Rust-removing drill attachment
  • Power drill
  • Lead paint test (always test if the tub might have lead paint)
  • Dust mask
  • A quart of clean metal primer
  • A quart of anti-rust paint in the color you choose
  • Small foam paint rollers and chip brushes
  • Paintbrush for oil-based paint
  • Drop cloth or cardboard to protect flooring

Step 1: Assess the Damage

We began by wiping down the tub inside and out with a sponge and water to distinguish superficial grime from deeper stains, rust pits, or flaking glaze. Rust is the biggest concern because it can eat through the glaze and eventually create holes. Fortunately, much of the surface grime came off with basic wiping, giving us hope the interior finish might be salvageable without professional reglazing.

Dirty inside of old clawfoot tub with sponge

There were stubborn hard-water and rust stains that required more effort, but discovering the original finish intact in many areas was a great sign.

Rust stains around faucet holes in clawfoot tub

Step 2: Clean the Inside with Vinegar

For lighter stains we mixed equal parts white vinegar and water in a spray bottle and coated the interior. After letting it sit briefly, we scrubbed with a green scouring pad. This step made a noticeable improvement, though not enough to leave the tub truly spotless on its own.

Cleaning clawfoot tub with sponge and vinegar

Vinegar is inexpensive and effective for many mineral deposits, but deeper rust required stronger cleaners and more abrasion.

Slightly cleaner white inside of clawfoot tub

Step 3: Heavy-Duty Scrubbing

We tried a soft cleanser next (Bar Keeper’s Friend) applied to a damp surface and left to sit. Initially scrubbing with a regular sponge didn’t move the toughest stains. Letting the cleaner sit longer and using a Heavy Duty Magic Eraser helped, though it used up erasers quickly.

Sponge and bar keepers friend cleanser in rust stained clawfoot tub

When we switched to fine-grade steel wool and continued to let the cleaner soak, the rust streaks began to lift. This was slow work and required persistence, but the progress was rewarding.

Wiping stains in clawfoot tub with steel wool sponge

Tip: We used the dulled tip of a multi-tool in a few spots to chip off particularly stubborn deposits, checking frequently to avoid scratching the glaze. A razor blade or putty knife can help remove old caulk, but use caution to avoid etching the surface.

Cleaned white inside of refinished clawfoot tub

The cleaned interior wasn’t perfect, but it was far better and felt durable. Because the original glaze survived in many areas, we were confident it would hold up with normal use.

Side by side before and after of cleaned inside of antique clawfoot tub

Step 4: Sand the Outside

The exterior had flaking paint and rust. We started by sanding with coarse grit sanding blocks to remove loose paint, then used a rust-removing drill attachment on a power drill to more efficiently strip the worst areas. Always test old tubs for lead paint before sanding—lead is dangerous, especially in bathrooms used by children.

Dirty outside of clawfoot tub with rust stains

After the power tool work we smoothed the surface by hand with medium and then fine-grit sanding blocks until it felt smooth to the touch and free of flaking paint.

Sanding attachment on drill buffing the outside of old clawfoot tub

Step 5: Prime with Clean Metal Primer

After wiping off dust, we applied an oil-based clean metal primer formulated to cover existing rust and help prevent future corrosion. We used small foam rollers on broad surfaces and cheap chip brushes to reach under the lip and around the feet. The primer can be runny and smelly, so protect floors and ventilate the room.

Can of RustOleum Professional High Performance Clean Metal Primer

Step 6: Paint the Outside

When the primer was fully dry, we painted the tub exterior in our chosen color. We picked a deep blue that complemented the bathroom floor pattern and mixed it into an anti-rust enamel recommended for metal surfaces. Again we used foam rollers for the body and an oil-paint brush to get into the tight spots around the clawfeet.

Applying Riverway paint to feet of clawfoot tub

If you like, paint the feet a contrasting metallic color for a two-tone look. The surface won’t be flawlessly smooth—subtle texture from the original finish may remain—but we liked that aged character better than a factory-perfect replica.

Painted outside surface of refinished vintage clawfoot tub

In the end, this project cost roughly $50 in materials and a fair amount of time. The result is a refreshed vintage clawfoot tub with a clean, usable interior and a deep navy exterior that fits our beach house aesthetic.

Navy blue painted refinished clawfoot tub

After the rest of the bathroom was finished and the plumber installed new fixtures, the tub felt complete. It looks right at home filled with water and ready for a long soak.

White bathroom with navy blue refinished clawfoot tub
Refinished clawfoot tub full of water

If you find an old clawfoot tub, don’t dismiss it. With careful cleaning, sanding, and the right primer and paint, you can renew the exterior and salvage the interior—often for a fraction of the cost of a replacement. This approach is ideal for anyone who enjoys DIY projects and wants to preserve vintage fixtures with modern performance.

*This post contains affiliate links*