How to Install a Subway Tile Kitchen Backsplash for $200
Ever wondered if you can DIY a kitchen backsplash? It’s easier and more affordable than most people think. Here’s how we installed a classic white subway tile backsplash with affordable tile sheets in my aunt’s kitchen. The project took two half-days and cost about $200 in materials.

Why Add a Kitchen Backsplash?
A backsplash protects walls from splashes and stains while adding instant style and value to a kitchen. If you’re doing a makeover, a tile backsplash is a durable, easy-to-update feature that can transform the room. After completing several tiling projects, including previous kitchen backsplashes, we’ve found that installing tile yourself is a straightforward way to get a high-impact result without a contractor price tag.

My Aunt Liz moved into a newer home that didn’t include a backsplash. She already had black cabinets and a gray-and-black granite countertop, so classic white subway tile was a perfect fit. You can install tile directly over painted drywall for a backsplash area—no need for cement board in most kitchen backsplash situations. Using premixed adhesive and grout makes the process even easier.

Preparing Your Wall for Tile
Before we started tiling, we cleared countertops, removed outlet and switch covers, and protected surfaces with painter’s tape and rosin paper. If you have old tile to remove, that’s a separate demolition step, but for painted drywall the prep is simple: roughen the paint with an 80-grit sanding block so the adhesive can bond.

Small aside: while taking photos I realized my hat was a little disheveled the whole time—ignore the hat and focus on the process and visuals.

Planning Tile Sheet Placement
We chose smaller 2 x 4″ subway tiles mounted on sheets because they scaled nicely for the space. Laying out sheets on the counter beforehand helped us avoid tiny slivers at the ends and ensured the pattern centered on the wall. We measured the area in advance and purchased about 10–15% extra tile to allow for breakage and cuts.

Hanging the Subway Tile Sheets
We used a premixed mastic adhesive and a small trowel to apply it to the wall in manageable sections under the cabinets. After spreading a thin layer, we ran a V-notched trowel at a 45-degree angle to remove excess and create grooves for better adhesion. Then we pressed the tile sheets into place and used 1/8″ spacers to keep grout lines even. You have several minutes to make adjustments before the mastic sets, so take a step back occasionally to check alignment.



Cutting the Tile Sheets
Tile sheets are quick to install, but cutting is where precision matters. For trimming mesh or glued sheets, pruning shears or heavy scissors work well to snip glue dots or mesh. For partial tiles around outlets or irregular shapes, a wet saw is the best tool—surprisingly precise and easy to control if you take it slow. For straight cuts, a manual ceramic tile cutter can work, but it’s limited to straight lines.

Don’t stress about making cuts perfect around outlets—the cover plate will hide small imperfections. The wet saw also sped up trimming full sheets to fit at the ends of walls. An adjustable guide on the saw helps when you need angled cuts, like 45-degree bullnose pieces for exposed edges.



Installing Ends and Borders
Decide where the backsplash will terminate. If it naturally meets a side wall, no special edge treatment is needed. When the tile ends in an exposed area, use bullnose tiles or 45-degree cuts to create a finished edge. We followed the existing granite backsplash height for a cohesive look, which made the tile feel like it belonged there from the start. If removing a granite strip is required, weigh the risk of damaging counters—sometimes leaving it in place is the best option.


Grouting and Caulking Your Backsplash
We completed all tile cutting and set the sheets in about five hours. After letting the mastic cure overnight, we removed spacers and began grouting the next morning. We used a premixed grout in a light gray for subtle contrast. Premixed grout saves time since you skip mixing, though some brands feel drier and require a bit more effort to spread cleanly.

Use a grout float to press grout into the seams, working it into every gap. Wipe off excess grout from tile faces by holding the float at a sharp angle. After roughly ten minutes, clean the tiles with a barely damp sponge to smooth joints and remove haze. You may need a second pass once the grout firms up to remove lingering haze.

Caulk seams where tile meets countertop, cabinets, or walls. We used a caulk color-matched to the grout for a seamless finish. Tape the edges to keep lines clean, apply a thin bead, then smooth with a wet finger and remove tape immediately. The caulk can appear lighter when wet but usually darkens to match once fully dry.

Completing Your Installation
Allow grout to cure for a full day, then buff the tile surface with a non-shedding cloth to remove any remaining haze. Be gentle around grout lines that are still curing. Some grout and tile combinations benefit from a sealer, but ours did not require it. After this final step, reinstall outlet covers and enjoy your new backsplash.

Liz was thrilled with the result—three walls completed for around $200. If you only need one or two small areas tiled, your cost will be even lower. Using tile sheets makes this an approachable DIY for beginners who want a professional-looking kitchen backsplash without a large budget.

The project may have inspired Liz to consider painting the kitchen to match the living room, but that’s a different project for another day. For anyone tackling a backsplash for the first time, start with careful prep, plan your layout, and take your time cutting and grouting—small attention to detail yields big results.
Tile Options and Inspiration
If this project motivates you to update your kitchen backsplash, consider a range of tile styles: classic subway, small mosaic sheets, herringbone patterns, marble accents, or bullnose edges for a clean finish. Choose grout and caulk colors that either blend for a subtle look or contrast for a more graphic effect.

More Tiling Projects and How-Tos
If you want more tiling ideas and tutorials, other projects to explore include small-scale herringbone patterns, marble herringbone around a fireplace, porcelain floor tile, penny tile backsplashes, and shower surrounds. Each project teaches techniques—cutting, setting, grouting, and finishing—that translate across many tile installations.
- Installing a small-scale herringbone in a laundry room
- Installing marble herringbone around a fireplace
- Installing porcelain floor tile in a laundry room
- Installing large stone tile in an outdoor area
- Installing a penny tile backsplash in a kitchen (cutting and grouting techniques)
- Removing and installing tile borders
- Installing a subway shower surround and marble floor
We’ll be doing more tiling soon for a beach house project—showers, bathroom floors, and another kitchen backsplash—so the tiling practice continues.
*This post contains affiliate links*
This post was originally published in May 2017








