Conceal a Water Heater with an IKEA Cabinet
Laundry Room Makeover with a Top-Loading Washer: Practical Storage and Simple Style
If you want ideas for hiding unattractive equipment in a laundry room, or you’re searching for photos of a laundry room with a top-loading washer (most online images show front-loaders with big counters), this renovation story should help. After months of planning and delays, the beach house laundry room and mudroom finally came together. It’s a straightforward, practical space we’d been designing since late 2017, but it kept getting bumped for larger projects like the walk-in pantry and the built-in bunk beds. With those done, we cleared out the lumber, tools, and dust and turned this corner of the house into a useful, attractive room.

From Porch Conversion to Proper Laundry Room
This space started as a poorly enclosed porch, which eventually led to rot and structural issues because interior flooring was used instead of exterior siding. When we bought the house the affected side required a complete rebuild due to failing foundation and settling in sandy soil. After reframing, drywall, and new floor tile, the room finally began to take shape.


By late summer the drywall and tile were installed, and the room stopped being a construction staging area. For months though it served mainly as storage for our tools and materials because we still didn’t have a garage or shed. Once our washer and dryer arrived, it was time to make the space fully functional.


The Main Problem: Hiding the Tankless Water Heater
The biggest visual challenge was the tankless water heater mounted on the left wall next to the washer. We wanted to conceal it but still maintain easy access for service and for shutting the unit off when the house is vacant. Our solution was a simple IKEA hack using an IKEA PAX wardrobe to create a built-in-looking cabinet that covers the heater while allowing access to electrical and plumbing components.

We chose a 20″ wide, 24″ deep PAX unit and opted for the 79″ height so it visually matched the window and door heights rather than towering over the room. The cabinet fits in the available space and creates a neat built-in nook next to the washer.

Modifying the Cabinet for Access and Stability
To allow access to the water heater and its breaker box, we cut a large opening in the PAX back panel before assembling the unit. The cabinet’s side panels carry most of the structure, so cutting the thin back panel provided needed clearance without weakening the wardrobe. We also cut a smaller hole in the side to slide the cabinet over the breaker box and added blocking and spacers so the wardrobe could be firmly fastened to the wall studs.



We measured carefully, taped cut lines for cleaner edges, and drilled starter holes in the corners to guide the jigsaw. On the cabinet’s wall side we installed vertical blocking 3/4″ behind the PAX front so we could attach a 3/4″ primed filler board later—this conceals the blocking and gives a built-in finish.


To make the cabinet appear to reach the wall we attached a painted 1/4″ plywood panel on the opposite side and added blocking at the back edge to keep stored items from falling behind the unit. The paint we used matched the room trim for a seamless look.

Open Shelves Above the Appliances
Next we added open shelves above the washer and dryer to hide hookups and fill the gap behind top-loading machines. Top-loaders can’t be covered with a countertop like front-loaders, so shelves positioned just above the rear edge of the machines work well. We used 12″ deep wood shelves supported by iron brackets; the bottom shelf can be lifted off the brackets when appliance access is needed.


The boards are 1×12 whitewood stained to complement the house’s pine details, sealed with a clear finish for durability. We used baskets and decorative accents to keep things tidy while leaving room for functional laundry supplies when needed.


Mudroom Touches and Final Thoughts
The mudroom side of the room still needs a few functional tweaks, but for now we brought down a wood bench and installed hooks to handle coats, towels, and beach gear. Once the outdoor pathway and primary entrance work are complete, this side door will likely become a heavily used entry after trips to the beach, so creating a durable, tidy mudroom is a priority.

Doing laundry isn’t thrilling, but having a clean, organized laundry and mudroom makes the chore less irritating and keeps tools and scrap wood out of the way. With slate floor tile, neutral walls, open shelves, and a concealed utility cabinet, the room now feels welcoming and functional.

Paint colors used in the space are White Heron on the walls and Stone Isle on the trim (both Sherwin-Williams). The combination of efficient storage, accessible service panels, and thoughtfully placed shelves makes this laundry room a practical and attractive part of the beach house.
*This post contains affiliate links and product mentions for reference.








