How to Remove Stains from Granite Countertops
Granite is a beautiful natural stone, but it is also porous and can absorb liquids that cause stains. If you’ve found a mark on your granite countertop, don’t panic—stains that look permanent can often be removed at home with simple products and a little patience. We’ve removed stubborn food stains and lived to tell the tale, so here’s a clear, practical guide to help you restore your countertop.

For instance, we once lifted a container of blueberries and discovered a bright pink stain on our brand new granite counters. It was alarming, but manageable. If you’re reading this because you’re worried about a similar stain, take a breath—there are effective, safe methods to try before assuming the worst.
Materials Needed
You won’t need expensive specialty cleaners to remove most granite stains—just a few household items. Gather the following before you start:
- Soft cloth or paper towels
- Liquid bleach (for stain removal only)
- Baking soda
- Hydrogen peroxide
- Plastic wrap or a plastic bag
- Dish soap or a gentle multi-surface cleaner
Gloves are recommended when you handle bleach or strong cleaners.
How to Remove Stains from Granite
For most stubborn stains—food, wine, or oil—the basic process is the same. It’s not about scrubbing; it’s about allowing the cleaning agent to draw the stain out of the stone:
- Blot up any fresh spill with a towel or cloth—don’t smear it.
- Apply one of the cleaning solutions described below.
- Cover the area with plastic wrap overnight, taping the edges if needed to keep it sealed.
- Remove the plastic, clean the area, and rinse well.

This method requires patience but little elbow grease—and it’s effective.
Using Bleach to Remove Granite Stains
In our case, a blueberry stain had sat on the counter for several days and looked like it might be permanent. The granite care guidelines that came with the counters suggested using liquid bleach for deep stains on properly sealed granite. Here’s the approach we used:
- Pour a small amount of liquid bleach directly on the stained area.
- Cover with a plastic freezer bag (or plastic wrap) to keep the bleach in contact with the stain.
- Check periodically; the stain can lift in hours. In our case it faded in under two hours.
- After cleaning, reseal the area if the sealer has been affected.

Using bleach directly can feel risky, but when used correctly it can be very effective. Only use full-strength liquid bleach for targeted stain removal on granite that is properly sealed. For routine cleaning, dilute bleach to a much lower concentration (for example, a quarter to half strength). Always wear gloves and work in a well-ventilated area.
Hydrogen peroxide or acetone can also work for some stains, but avoid common nail polish removers because they may contain additives that harm the sealer. Test any cleaner in an inconspicuous spot first, and consider resealing treated areas afterward to restore protection.
Can I use vinegar on granite?
No—acidic cleaners like vinegar, lemon juice, or ammonia can etch granite, causing dull spots or changes in texture. Avoid acidic products on natural stone.
Using a Baking Soda Poultice
A poultice made from baking soda is a safe alternative to bleach. Mix about two tablespoons of baking soda with one tablespoon of water or hydrogen peroxide to form a thick paste. Use water for oil-based stains and hydrogen peroxide for water-based stains. Apply the paste over the stain, cover with plastic to keep it moist, and let it sit for several hours or up to a few days. When the poultice dries and draws out the stain, clean the area with soap and water.
Removing Water Stains from Granite
Water stains and mineral buildup are common, especially near sinks or faucets. Try these steps from least to more aggressive:
- Dry the area completely to remove standing water.
- Wipe and buff with mild soap and a microfiber cloth.
- Use a baking soda and hydrogen peroxide poultice and gently scrub with a soft brush or old toothbrush.
- Apply a poultice, cover with plastic overnight, then rinse and dry.
- For limescale, very carefully use a razor blade at a low angle to lift deposits—go slowly to avoid damaging the surface.
When the surface is clean and dry, apply a fresh sealer to reduce future water staining.
Preventing Granite Stains
Prevention is the easiest way to protect your granite. Follow these practical habits to keep your counters looking their best:

Wipe up spills right away
Don’t let oils, food, wine, soap, or even water sit on the surface. Wiping counters after cooking or dining reduces the chance of stains setting in.
Seal counters regularly
Granite typically needs to be resealed every 12 to 18 months; lighter stones can be more porous and may require more frequent sealing. After using strong cleaners or stain-removal methods, reseal the area to restore protection.
Don’t leave wet dishes on the counter
Wet glasses or dishes can leave water rings, especially if your water is hard. Use a towel or drying rack instead of placing wet items directly on the stone.
Limit risky activities on granite
When possible, perform messy tasks—like heavy meal prep or pouring wine—away from vulnerable areas. Use cutting boards, trivets, or mats to protect the surface, and store staining foods like berries in sealed containers.
After removing our blueberry stain, we felt more confident about living with granite. That large, ugly mark vanished in a few hours, which made stains seem a lot less frightening. If you’re deciding on granite but worry about maintenance, remember that with reasonable care and occasional spot treatment, granite countertops are more durable and easier to maintain than they often get credit for.
*This post contains affiliate links, so we may earn a small commission when you make a purchase through links on our site at no additional cost to you.








