How to Build a Channel Tufted Headboard from Scratch
After using our favorite method to make a simple headboard for our son’s room last week, we had enough leftover materials to try a new idea in our daughter’s room. The result was a completely free, cozy headboard that she helped design and build—so she loves it. That made the project even more rewarding.

Before I explain the headboard steps, here’s how her room has evolved since we moved in. When we first saw the house it looked very different, and the transformation has been dramatic.

Like in our son’s room, we were able to vault the ceilings to make the space feel larger (the roof slope and empty attic made it a non-structural change). We also replaced popcorn ceilings with plank-and-beam detailing. That work was completed by our contractor while we were still living elsewhere, and we shared progress photos during the renovation.

Now, after a couple of months in the house, the room feels settled. Most furnishings came from our previous homes: the woven rug, the nightstands, dresser and bedside lamps were all repurposed. We bought just a pendant light, curtains and a new bed frame—the bed frame gives her three sides of under-bed storage with eight cubbies that hold bins of toys, games and books.

We initially considered replacing the exterior door in the room with a window, worried about privacy or potential teen mischief. Instead we added a secure deadbolt and a whole-house alarm sensor on that door. An unexpected benefit: in an emergency her and her brother’s bedroom can exit directly outside. We may still convert it to a window someday for more furniture options, but for now it feels practical and safe.

Okay—back to the headboard. Floating the bed under the window was the best layout, but it left little room for a store-bought headboard. We’ve mounted headboards in front of windows before, but that wasn’t ideal here. Instead we improvised.

We had a lot of scrap fabric left from our son’s headboard project, but not full-size pieces. We decided to piece them together and make a horizontal, channel-style upholstered headboard—three visible horizontal channels above the mattress, plus a fourth behind and below the mattress so there’s no gap at the bottom.

We cut four identical strips of scrap plywood using a circular saw (our pieces measured 39″ wide by 7″ tall; batting and fabric add about 1/2″ thickness). Then we wrapped each panel with two layers of batting, stapling it tightly around the edges. This step is the same as any upholstered headboard, but in this build we upholstered each narrow panel separately before assembling them.

Next, we covered each panel with fabric, cutting and stapling so the fabric is smooth and neat. If you have a patterned fabric, plan the layout so the pattern lines up across pieces. For our fabric, pattern matching wasn’t necessary.

With each strip upholstered, the pieces looked like narrow padded channels ready to be joined together.

We attached all four strips by nailing and screwing two longer scrap plywood connectors across the back, one near each end, clamping the upholstered strips tightly together while fastening. Make sure your screws and nails are short enough not to poke through the panels and fabric. Pushing the assembled strips against the wall while fastening keeps edges even and eliminates gaps between channels.

To hang the headboard we used a simple French cleat cut on an angle with a saw. You can also use D-rings or a pre-made cleat. Hang the cleat on the wall and lift the headboard onto it; the cleat keeps the piece secure and easy to remove if needed.

We deliberately made a fourth panel so the headboard extends below the mattress to the top of the bed frame. That avoids awkward gaps and makes the installation feel intentional and finished.

The mattress pushed back in covers the lower panel, so it blends seamlessly. That small extra step paid off in the final look.

There’s more to this room we’ll share later—large DIY-framed canvas art, a bright painted wall treatment behind the dresser, and other finishing touches. We cropped some shots here to preserve a few surprises, but we’ll post tutorials soon.
Vaulting the ceiling was one of the best decisions for this space. It makes the room feel much bigger in person. Here’s a before-and-after to show the difference.

…and now!

A horizontal photo doesn’t always do the whole room justice, but the space feels transformed.

Ah—much better.
More DIY Headboard Tutorials
If you want more ideas using similar upholstery techniques, try these projects we’ve done:

- Adding an upholstered headboard to an existing bed’s headboard
- Creating a multisided upholstered headboard for a daybed
- Making a lightweight fabric headboard
P.S. To follow the full renovation story of this house, see the Florida house archive for every update we’ve posted.
*This post may include affiliate links; we may earn a small commission from purchases at no additional cost to you.








