How to Strip a Deck Before Staining
When we bought our house, the deck was in rough shape. Before we could refinish it with a fresh coat of stain, we had to remove the old finish first. It was a sizable job—our deck is almost 700 sq. ft.—but entirely doable as a weekend project even for a first timer.

That image shows the results of the stripping stage. If you want to see the finished deck after staining, check out our How To Stain & Seal A Deck tutorial.
We also repaired a section where a tree had grown through the deck; there’s a tutorial for Patching a Wood Deck if you need it.
Can I Skip the Stripping Step?
For the most durable finish, removing the old stain or paint is recommended. There are products designed to go over an existing finish—Rust-Oleum Restore and Behr DeckOver create a thick, paint-like coating. We chose not to use those: Restore felt too rough, DeckOver would have been expensive, and we wanted a traditional stained wood look rather than a thick coating. That’s why we stripped our deck first.
Can I Just Use a Pressure Washer?
Power washing can be an effective way to remove dirt, mildew, and even old finish when used with appropriate cleaners. We used a pressure washer to refresh our outdoor shower, but for this deck we avoided it because the wood was soft and partially rotted—high-pressure water could have caused further damage. If your boards are solid, power washing is worth considering and can save time.

How to Strip Your Deck Yourself
Here’s a concise overview of the six main steps to strip the finish from a deck, porch, stairs, or railings. Depending on size, this can often be done in a day or over a weekend.
- Ready Your Deck
- Wet Surrounding Plants
- Apply Deck Stripper with a Roller
- Scrub Off the Old Finish
- Neutralize the Stripper
- Enjoy Your Results
Tools & Supplies
These are the materials we used to remove the old finish:

- Bucket – for pouring stripper and dipping the roller
- Protective gear – rubber gloves, goggles, and a respirator or mask
- Stiff-bristle brush with pole
- Hose
- 1/2″ nap paint roller with extension pole
- Wood stain & finish stripper – we bought four bottles and used three
- All-in-one wood cleaner/brightener
- Pump sprayer – for applying the cleaner

Step 1: Ready Your Deck
Clear the deck of furniture and obstacles, check the weather, and choose a cool, cloudy day if possible. You don’t want the stripper to dry out during application, so plan enough uninterrupted time to complete the section you’re working on.

Step 2: Wet Your Landscaping
Wet nearby plants and landscaping before you start so they’re less likely to absorb runoff. The stripping products are generally biodegradable and water-cleanup friendly, but it’s good practice to dilute any runoff by pre-wetting vegetation.

Step 3: Apply the Deck Stripper with a Roller
Pour stripper into a bucket for easy roller dipping. The product we used is fairly thick—easy to control and spread without excessive dripping. Work methodically to coat every board and follow the manufacturer’s recommendation for dwell time; typically between 5 and 45 minutes depending on conditions. If the stripper starts to dry, mist lightly with water to keep it active.



Step 4: Scrub Off the Old Paint or Stain
Once the stripper has loosened the finish, use a stiff-bristled brush to scrub each board. The product helps lift the finish, but friction is needed to remove it. Expect to apply some pressure: the finish often comes off in a brownish residue that rinses away to reveal the wood grain beneath. Hooking your hose to the brush or rinsing frequently speeds the process and helps you see progress as you work.



Step 5: Neutralize the Deck Stripper
After scrubbing, apply a wood cleaner/brightener to neutralize the stripping chemical and brighten the wood. We used a pump sprayer with a 1:1 mixture of water and cleaner and then scrubbed it lightly into the boards. Finish by rinsing thoroughly to remove any remaining residue.



Step 6: Enjoy the Results
The stripped deck looked significantly better: much of the peeling finish and gray weathering were removed and the wood appeared refreshed and lighter. It blended well with the small patch of new wood we had installed after removing a tree. The full process for our section took about 3.5 hours; we completed the rest the next day. Doing the job in sections can make the work more manageable.


Next we planned to apply a semi-transparent stain similar in color to the previous rich brown so the newly stripped boards would blend with the remaining railings, which we left as-is because they were in good shape. The end result should look cohesive and refreshed.

The main takeaway: even a weathered, peeling deck can be revived with the right products and some elbow grease. Stripping and neutralizing the surface prepares the wood for a long-lasting stain and can extend the life of the deck before a full replacement is needed.
More Deck Resources

We’ve shared other deck projects and tutorials you might find helpful, including building a gate, staining and sealing, and full deck builds. Check those posts for additional tips and step-by-step guidance.
*This post contains affiliate links; we may earn a small commission when purchases are made through links on our site at no additional cost to you.








