DIY Closet Shelves: Step-by-Step Guide to Build Custom Storage
Good storage transforms any closet, and it’s especially crucial in compact spaces like a laundry closet. That’s why we built very simple DIY closet shelves right after we moved in. This project is approachable for most people: it uses minimal materials, only a few hours of work, and can be tailored to your closet’s size and storage needs.

We’ll also show how to build a matching laundry counter that sits over the washer and dryer. The counter is removable so you can access appliances for maintenance without dismantling the shelving.

These shelves have held up for nearly four years and still look and perform like new.
Steps for Building DIY Closet Shelves
The design is straightforward: a 3/4″ plywood or MDF top rests on 1×2 support pieces attached to the wall in three places—both side walls and the back. This simple technique creates very strong shelving and works well in tight laundry closets, pantries, and built-in bookcases.
Quick overview of the process:
- Step 1: Measure and mark your closet
- Step 2: Install shelf supports
- Step 3: Add shelf tops
- Step 4: Attach a front face piece
- Step 5: Add a cross support (optional)
- Step 6: Stain, seal, or paint
That’s it—simple steps that yield sturdy, attractive shelves.
Materials & Tools Needed
You’ll need two wood types (1×2 pine and 3/4″ plywood or MDF) plus common workshop tools and fasteners. Below is a practical shopping list for standard laundry closet shelves:
- 1×2″ pine for shelf supports (or pre-primed wood for painting)
- 3/4″ plywood for shelf tops (or MDF if you plan to paint)
- Miter saw
- Circular saw
- Stud finder
- Long level
- Measuring tape
- Nail gun or finish nails
- Electric drill
- Cabinet screws or wood screws for mounting to studs
- Wood glue
- Sealant, stain, or primer and paint
- Brush or rag for application
Before buying materials, measure your space so you know exact board lengths and plywood cuts required.
Closet Shelf Ideas
There are many approaches to laundry storage depending on your space and needs. Options include floating shelves on heavy-duty brackets, upper cabinets for concealed storage, long single shelves that connect to a nearby counter, or narrow shelves for stacked units. Below are examples from different projects to spark ideas for your layout.
Sometimes a blank wall allows decorative floating shelves paired with cabinets; other times you’ll build skinny shelves to fit a narrow niche. In every case, plan around obstacles like water heater access, electrical outlets, or attic hatches so shelving remains functional.

For a larger laundry room, upper cabinets can hide clutter while a butcher-block counter or continuous shelf provides a useful work surface. In narrow spaces, shallow built-in shelves make the most of every inch without crowding the appliances.

Sometimes the solution is as simple as removing bulky doors or concealing shelves with a curtain or blind. Choose the approach that fits your aesthetic and storage needs.

Our current laundry closet had a clearly defined opening but also an attic access in the center of the ceiling, so we kept shelf depth moderate to preserve access.

Step 1: Measure & Mark Your Closet
Measure the width and depth of the closet and decide how many shelves you want. Plan for full, single-piece shelf tops when possible to avoid seams. Also calculate lengths of 1×2 support pieces for both the perimeter supports and any center cross supports you’ll add.
- Plan each shelf top size so it can be cut from standard plywood sheets if possible (two 5′ × 1.5′ shelves can often be cut from one 4′ × 8′ sheet).
- Account for support pieces: three long pieces for the back and sides and additional shorter pieces for ends and middle bracing.
Mark stud locations with a stud finder and mark a level line at the intended shelf height so mounting is accurate.

Step 2: Install Shelf Supports
Cut your 1×2 support pieces to length and attach one long support along the back wall and one on each side wall. Use a level to mark placement, remembering to allow for the 3/4″ plywood thickness so the finished shelf sits flush where you want it.

Secure the supports to studs with cabinet screws or heavy-duty wood screws. If you prefer hidden fasteners, counter-sink the screws. Angled cuts on end pieces can help the supports tuck behind the front face piece for a cleaner look.

Step 3: Add Shelf Tops
Lay your plywood shelf tops onto the supports. If you need to cut them at home, a circular saw will do the job. For a removable counter above appliances, leave the plywood loose so you can lift it to reach plugs and hoses.

For permanently fixed shelves, fasten the plywood to the supports with finish nails or screws, and consider glue for extra strength.
Step 4: Add a Face Piece to Each Shelf
Nail and glue a 1×2 face piece along the front edge to conceal the plywood’s raw edge and make the shelf appear thicker and more finished. This also hides the ends of the side supports if you’ve cut them at an angle.

The face makes a simple shelf look custom and built-in.

Step 5: Add Cross Support (Optional)
If your shelves are wide or you anticipate heavy loads, add a center cross brace. Attach a 1×2 lengthwise under the middle of the shelf into the side supports; secure it with screws driven at an angle or use brackets underneath for additional strength. Drill pilot holes to avoid splitting the wood.

Step 6: Seal, Stain, or Paint Your Shelves
Finish the shelves with a clear water-based sealer, stain, or primer and paint. Fill nail holes before painting and allow finishes to fully dry before loading shelves. We sealed our shelves clear to preserve the warm plywood tone, but paint is a great option for a different look.

Over the years the shelves have held linens, towels, tools, light bulbs, and even seasonal decorations. Adding hooks to the doors turns the closet into a mini mudroom for backpacks, coats, and bags, while bins and small organizers keep smaller items tidy.


After nearly four years of use, these simple floating shelves remain a practical, durable, and attractive storage solution for a small laundry closet. With careful measuring, solid mounting into studs, and a clean finish, you can build dependable shelves that maximize space and keep laundry essentials organized.


*This post may contain affiliate links; we may earn a small commission at no additional cost to you if purchases are made through links mentioned in the original source.








