How to Remove Wallpaper Without Damaging Walls
Wallpaper is coming back into style, but many homes still have old, dingy, or dated wallpaper that the current owners didn’t choose. Our house had wallpaper in five rooms, so we tested several removal methods. Below we explain what worked, what didn’t, and a practical process you can follow.

Removing wallpaper doesn’t require expensive tools, but it can take effort and patience. To keep your momentum, remember that removing wallpaper often yields dramatic before-and-after results.

If you’re planning to add modern removable wallpaper later, know that peel-and-stick varieties behave like large stickers and are much easier to remove—though you should still peel carefully to avoid lifting paint.
Table of Contents
How Wallpaper Works
Most traditional wallpapers have two layers: a decorative top layer made from vinyl, paper, bamboo or textiles, and a backing that includes adhesive or glue. Removal methods focus on weakening or dissolving that adhesive so the paper can be peeled away. Depending on age and construction, the decorative layer and the backing may come off together or in separate stages, so different techniques can be necessary.

Removable peel-and-stick wallpaper is different: it behaves more like a sticker and typically comes down more cleanly, though it can sometimes lift paint if removed too aggressively.
Wallpaper Removal Supplies
Before you begin, gather these supplies:
- Large sponge or rag
- Putty knife
- Utility knife
- Painter’s tape
- Plastic drop cloths
- Trash bags and paper towels
- Steamer (recommended, but optional)
- Wallpaper stripping solution or ingredients to make one
- Wallpaper scoring tool (optional)
- Wallpaper scraper (optional)
Scoring and scraping tools are inexpensive, but they didn’t help much in our tests. Premixed strippers work fine, or you can make effective homemade solutions using common household items—recipes are included later.
Four Ways to Remove Wallpaper

We tested four common approaches:
- Dry removal (peel by hand)
- Warm water
- Stripping solutions (store-bought or homemade)
- Steaming
Different wallpapers responded differently. Often the best results came from combining methods: start dry, then use heat or water where needed.
Wallpaper Removal Tutorial
From our experience, follow these steps for an efficient removal:
- Prepare your room
- Start with dry removal
- Try steaming
- Finish with warm water or stripping solution
- Repair walls if needed
A Note About Scoring
A scoring tool makes tiny perforations to help liquid reach the adhesive. In our experience scoring is time-consuming and often produces small, choppy pieces rather than large sheets. If you try it, test a small area first to see if it helps in your situation.

Step 1: Prepare Your Room
Wallpaper removal is messy. Protect your space by doing a few simple things first:
Move items away from the walls
Clear furniture from the edges or move it to the room center. Take down artwork and wall decor.
Remove switch plates and outlet covers
Unscrew electrical covers to access wallpaper behind them—many covers are wallpapered too, so these will need to come off.

Protect floors, furniture, and outlets from moisture
Use plastic drop cloths and painter’s tape to shield floors, furniture, and electrical areas from water and glue.
Step 2: Start With Dry Removal
Before using any liquids or tools, try peeling a corner by hand. Use a putty knife to lift a seam, then pull slowly. Often the top decorative layer will lift easily, especially in humid areas like bathrooms.

Dry removal won’t usually finish the job because adhesive often remains, but it’s a satisfying and useful first step that can make the remaining work easier.
Step 3: Try Steaming
A steamer was the most reliable method we tested. Steam softens the glue so the paper and backing often come off in large sections. You can use a handheld fabric steamer or a dedicated wallpaper steamer—larger tanks and longer hoses work better for big walls.

We recommend a “peel as you steam” approach: hold the steamer over a section until the glue softens, then pull the paper down while continuing to apply steam. Steaming can be tiring if the hose is short or the tank is heavy, but it’s often the fastest route to removing both paper and adhesive together.

If you don’t have a steamer or if stubborn glue remains after steaming, use warm water or a stripping solution to finish the job. A large damp sponge is usually more effective than a spray bottle for applying heat and moisture evenly—just keep it damp, not dripping.
You must remove adhesive residue before painting; painting over glue will lead to uneven finish and adhesion problems.
Step 4: Finish With Warm Water or Stripping Solution
Two simple DIY options will help remove remaining glue:
- Warm water applied with a sponge or rag
- A stripping solution—store-bought or homemade
Common homemade mixtures include:
- Fabric softener mixed with hot water
- Laundry detergent mixed with hot water
- White vinegar mixed with hot water
- Dish soap mixed with hot water
Mix roughly equal parts solution and water, or slightly more water for vinegar or soap mixes. To remove adhesive:
- Dampen a sponge—don’t let it drip
- Wet a small section and let sit 2–3 minutes
- Peel the paper by hand or lift with a putty knife
- Repeat in small sections to prevent drying

You may need a second pass to remove glue thoroughly. For stubborn bits, rub gently with the rough side of a damp sponge or use a scraper if necessary.
Other Wallpaper Removal Tips
A few general tips to make the process smoother:

Take your time
Work carefully. Let heat or moisture dwell long enough to reactivate adhesive and lift panels slowly to avoid tearing and gouging the drywall.
Work in small sections
Treat one or two panels at a time so areas don’t dry before you can peel them.
Manage your mess
Keep trash bags handy and clear scraps frequently so adhesive doesn’t dry on the floor.

Keep a utility knife nearby
Cut wallpaper that tucks under molding or trim and use tweezers for small leftover bits.
Step 5: Repair Your Wall (If Needed)
Wallpaper removal can damage paint and drywall. Use lightweight spackle to fill dings, peeled patches, or gouges. For shallow texture issues an even skim of spackle usually does the trick; larger damage may require drywall mud or a full skim coat.

After the spackle dries, sand smooth with a high-grit sanding block or palm sander. If damage is minor you can sometimes sand without spackling first. Always prime before painting: leftover adhesive can cause paint to appear uneven unless sealed with primer.

You Removed Wallpaper. Now What?

Once the wallpaper and adhesive are removed and repairs are complete, you have many options: prime and paint, install new removable wallpaper, add a wall mural, or create a decorative treatment such as board-and-batten or fabric panels. Choose a finish that suits the room and the amount of prep you completed.
- Prime surfaces before painting to ensure even color and adhesion.
- Consider peel-and-stick wallpaper if you want a removable, easy-to-change option.
- Explore molding or paneling for a permanent architectural upgrade.








