Build a Floating Desk and Shelves for an Office Nook
I know it sounds a little unexpected to add a tiny DIY office nook to a vacation rental, but when we were deciding what to do with the other side of the pantry, several readers suggested a small desk area for checking email, writing, or reading quietly. We briefly considered it but opted for more cabinet storage there (you can see that here). Still, the idea of a compact workspace lingered, and we eventually found the perfect spot to build one.
The result is a tiny room transformed into a surprisingly functional and polished workspace. It’s a reminder that even a narrow strip of wall can become a useful office area with a simple desk and a couple of shelves. The project didn’t require fancy tools or a big budget, and practically anyone can do it.

If you want more shelving inspiration, we’ve gathered 16 DIY shelving ideas that could spark more projects.
This little room sits near the top of the stairs at the beach house. It’s about the size of a queen mattress, so it never made sense as a full bedroom. Below is how it looked when we first bought the house in fall 2016:

And here’s the current view. Refinished floors, fresh walls, and a cleaned-up ceiling made a huge difference—what was once a crumbling space now feels bright and usable.

We debated several uses for this room—reading/game nook, extra storage, or a spot for a Pack & Play. For months it mostly held stuff, but when Sherry’s brother visited in July the room proved to be a great temporary sleeping space for a baby in a Pack & Play. The room-darkening blinds and the just-right floor space sealed the decision: we could have storage on one wall and a small desk on the other.

We moved the chair and side table into the front bedroom, set up the Pack & Play, and realized there was plenty of room left for a desk and shelving. Best part: the whole build cost us only $201. Here’s a clear breakdown of what we used and how we did it.
Materials & Budget
- Two 1″ x 18″ x 72″ pine shelving planks – $40 (ours were $19 each in store)
- Two 1″ x 12″ x 72″ common boards – $30
- One 1″ x 2″ x 72″ select pine board – $4
- Two 16″ heavy-duty white shelf brackets and screws – $19
- Six decorative 12″ iron shelf brackets – $108
- Wall anchors (if needed)
- Wood stain, pre-stain conditioner, and sealer – $24 (we already had these)
- Total spent: $201 (or about $225 to buy everything if you don’t already own stain and sealer)
The decorative iron brackets were the largest single cost, so swapping to simpler brackets is an easy way to save money. We chose those for consistency with our laundry room hardware, but less expensive alternatives will work just as well for function.

Making The Desk
We built the desk using two heavy-duty white brackets from Home Depot to support the desktop. They’re designed to be functional and visually unobtrusive so the wood appears to float. The 16″ bracket depth paired nicely with the 18″ shelving boards we chose for the desktop (actual width is about 17.25″).

We used a stud finder to mount the brackets into studs for maximum strength. Because of stud placement, the brackets aren’t perfectly centered from the side walls, but they’re only a few inches off and it’s not noticeable in such a small room. If centering matters for your space you can use wall anchors instead.
The top of the bracket was set 29″ from the floor so the finished desktop sits just over 30″—a standard desk height. After cutting the boards to length, we laid two planks on top of the brackets so the desktop would read as thicker than a single 3/4″ board.

Once stained, we screwed the two boards together from the underside and fastened the desktop to the brackets. To hide the seam at the front edge, we nailed a stained 1 x 2″ face piece to the front. Sand the face piece’s outer edges before staining so it’s smooth and comfortable on your wrists.

The layered look matches the shelving’s plank-like appearance and gives the desk a finished, built-in feel while adding a little extra width—handy when you need more surface area to work on.

Hanging The Shelves
Shelves above the desk add the storage element we wanted for linens, repair supplies, appliance manuals, and other essentials. We used the same decorative iron brackets we already have in our laundry room for continuity.

The first shelf sits 26″ above the desk—high enough so you won’t bump your head when you stand. I located studs (there was one centered and two at the outer edge), used a laser level to mark the line, and then installed the brackets. Take the time to level the bracket itself so the screws enter the wall evenly; it makes a big difference in the final look.

The brackets we purchased included screws. Use a ratchet or hex driver for installation and drill pilot holes first so screws go in cleanly and accurately. After the first shelf, we installed a second one 18″ above it—an ideal spacing for baskets, boxes, or larger decor. If you plan to store smaller books or games, 12–14″ spacing might work better.

We like that the wooden shelves simply rest in the iron brackets without being permanently attached—easy to remove or adjust later. After a few hours of work, the desk and two shelves were hung and ready for finishing touches.

Staining The Shelves
Two quick staining tips: always use a pre-stain wood conditioner to avoid blotchiness—apply it liberally, let it soak for about 10 minutes, then wipe off excess. It’s inexpensive and dramatically improves the final result. You can see the difference conditioned wood makes in the photo below.

We matched the shelves to the warm tones of the beach house’s old pine floors by first applying Minwax Puritan Pine, then a light coat of Minwax Colonial Maple to add a subtle red hue that mimics heart pine. After the stain dried we applied a few coats of protective sealer before rehanging the shelves.


Storage & Finishing Touches
Once finished, Sherry stocked the shelves with a mix of practical items and decorative touches. The space blends function and style: baskets and magazine files keep manuals and warranties tidy, while a few decor pieces make the nook feel inviting. There’s also a handy space under the desk to slide suitcases during a stay—out of the way but accessible.

Most of the decorations were items we already owned: a faux succulent, a small frame, a thrifted painting, and woven baskets. We did pick up a clock, magazine files for documentation, and a desk lamp to finish the work area. A brass crab that a reader gifted now adds a whimsical beach-house accent and doubles as tiny storage—perfect for paperclips or rings.

The desk chair was already on hand from the dining area, and an old thrifted armchair with a new cushion gives the room a cozy reading spot. Overall, the project took just a few hours and a modest budget, and it solved multiple needs: storage, a place to stash a Pack & Play, and a small home office spot.

Even Burger seems pretty pleased with the new nook—he’ll probably tell you all about it once he wakes up from his nap.
P.S. If you want early access to project ideas, behind-the-scenes updates, and other DIY news before it hits the blog, consider signing up for our free email newsletter.
*This post contains affiliate links*








