Objectales

Popular

Build a Sturdy DIY Bookshelf in a Weekend

featured 63311

Today we’ll walk you through how we built the built-in bookshelves in our son’s bedroom. This is a straightforward, repeatable DIY that we’ve used in many places—from our living room to our beach house pantry. These bedroom shelves were our first attempt, and we were thrilled with the outcome: an affordable, sturdy set of built-ins that look custom-made.

Boys bedroom with built-in bookshelves on either side of the bed,

This guide focuses on building the upper shelving portion of the built-in. We previously documented how we created the cabinet bases (an Ikea hack) and how we finished everything with crown molding, but not every bookshelf needs a base or crown, so this article covers the core shelf build on its own.

Four steps to DIY build-in bookshelves

You can also see this room’s progression—from the nursery stage to the big-boy bedroom—where these shelves stayed useful and attractive as the room evolved.

Table of Contents

Tools & Materials To Build A Bookshelf

Floor to ceiling built-in bookshelf in boys bedroom

Below are the supplies and tools we used to build these built-in shelves. Quantities depend on the size of your build, so plan accordingly. If you don’t own a table saw or circular saw, consider renting one or having your plywood cut in-store.

  • 1/2″ MDF or plywood for shelves (MDF gives a smoother painted finish)
  • 1×3 pine (ripped in half) for shelf support strips
  • 1×2 pine for front face trim pieces
  • 1×4 or 1×6 pine for a top brace
  • Measuring tape
  • Stud finder
  • 24-inch level
  • Clamps
  • Nail gun with finish nails
  • Miter saw
  • Table saw or circular saw
  • Power drill/driver
  • Wood glue
  • Paintable caulk
  • Primer, paint, and painting supplies

How much wood you need depends on your measurements, so the next step—planning—will save time and money.

Step 1: Plan Your Build

Start by measuring your wall and sketching the bookshelf layout on paper. Decide how many shelves you want, the spacing between them, and how the design will fit around existing elements like windows or trim. Planning helps you optimize cuts from a 4×8′ sheet of plywood or MDF and prevents wasted material.

Drawing of plywood cuts to get shelves for bookshelf

Note: We used plywood to match the subtle grain of our base cabinets. For a perfectly smooth painted look, choose MDF for the shelves.

Step 2: Cut Your Shelf Pieces

Cut your plywood or MDF into the shelf boards and side panels. A table saw yields the cleanest cuts, but a circular saw works fine if you clamp a straight edge guide. We had our plywood ripped into uniform strips at the home center based on our layout sketch, which made matching shelf widths simple.

Man cutting MDF using a circular saw

If you cut at home, clamp similar pieces together and cut both at once when possible to ensure consistent sizing. Measure twice and cut once.

Step 3: Prime & Paint Your Shelves

Paint large pieces flat before installation. It’s faster to roll the faces, and you’ll only need minor touch-ups after assembly. Prime raw MDF or plywood first—this prevents the wood from absorbing paint unevenly. We used Benjamin Moore Senora Gray for these shelves.

Painted pieces of homemade DIY bookshelf

Step 4: Build Your Bookshelf Frame

After paint dried, secure one tall side panel to the wall by screwing through into studs, using countersunk screws you’ll fill later. For the opposite side—when you can’t fasten directly to studs—install a hidden top brace (a 1×3 or similar) screwed into studs across the back wall; this gives you a solid place to attach the free side panel. An alternative is to add a full plywood back, but we skipped that to reduce cost.

Man attaching side piece of bookshelf attached to a wall

We also installed a 1×6 across the front near the top to help keep the structure square while assembling. Temporary bottom pieces can be laid in place to maintain alignment as you work.

Man screwing into the side of a homemade DIY bookshelf
Man adding trim piece at the top of custom bookshelf

Step 5: Add Your Shelves

Decide shelf spacing by measuring and using painter’s tape as a visual guide. We settled on roughly 10″ spacing with a little extra room at the bottom. Remember to account for the thickness of the shelf boards when spacing.

Measurements of shelf spacing for DIY bookshelf

Attach thin support strips under each shelf on three sides. We ripped 1×3 stock down to about 3/4″ to keep those supports concealed by the front face trim later. Nail and then screw these supports into studs and the side panels so the shelves can carry weight long-term. Slide the pre-painted shelf boards into place and fasten them to the supports.

Man using level to nail in shelf support pieces
Shelves placed during build of DIY bookshelf

We nailed each shelf down into the support strips so the boards can’t shift or rattle over time.

Step 6: Finish With Face Pieces

Adding 1×2 face trim to the front of each shelf instantly elevates the look, hides raw edges, and makes shelves appear thicker. These face pieces were primed and painted beforehand and simply nailed on to finish the front edges cleanly.

Man nailing trim pieces on the face of DIY bookshelf

We also painted the back wall and the top brace before final assembly and pre-filled a few gaps where the wall wasn’t perfectly flat.

Step 7: Caulk & Touch-Up Paint

Caulk all seams where materials meet—shelf to wall, support to wall, and face trim to shelf. Fill nail holes and touch up any paint. These final details are what make the installation look clean and built-in.

Man caulking under shelf of built in bookshelf

Once caulk is dry, do small touch-ups with a brush or roller. This is much quicker than repainting major surfaces and gives the shelves a polished finish.

Step 8: Add Crown Molding (Optional)

If you want a more finished, architectural look, add crown molding across the top of the built-ins to match the room trim. We used a layered approach—installing a board first to build up the profile—so the crown reads as heavier and more custom. This step is optional but dramatically elevates the finished look.

Hand holding crown molding piece in place on DIY bookshelf
Top of Build Bookshelf with crown molding

These shelves cost us about $60 apiece to build, including materials for the base units, making this a very affordable custom-looking solution. They provide great storage and a neat display area while blending seamlessly with room trim.

Boys Bedroom With Custom Bookshelves And Reading Chair

For inspiration, we documented this room’s earlier nursery setup and later transition to a big-boy bedroom—both showing how built-in shelving adapts over time and remains useful as needs change.

More DIY Shelving Projects

If you want more shelf ideas, look for roundups and tutorials that gather multiple DIY shelving projects, including pantry shelving and other built-in solutions that use the same basic techniques described here.

Grid of Six Favorite DIY Shelf Ideas

P.S. If readers ask about specific items in the room, we keep a reference of paint colors and favorite purchases for easy identification.

*This post contains affiliate links*