Objectales

Popular

Build Long Reclaimed Wood Shelves: Step-by-Step Guide

featured 80400

A while back we promised to share the full details on how we built and installed the reclaimed wood shelves that became part of our bright white kitchen remodel. Here’s everything: measurements, finishing techniques, and hanging tips so you can replicate the look or adapt it for your own space.

reclaimed wood shelves in white kitchen remodel

We hadn’t originally planned shelves for that wall. Our first idea was a large piece of art, but it felt flat and the wall needed more dimension. Shelves offered both visual interest and extra, easy-access storage for frequently used items like drinking glasses. And of course the styling possibilities—plants, bowls, and small decorative items—were an instant win.

reclaimed wood shelves with polished nickel brackets and plants

Our very first decision was the brackets. We chose polished nickel shelf brackets to tie in with other polished nickel finishes in the kitchen. The clean metallic look gave a nice contrast to the reclaimed wood we planned to use.

reclaimed wood shelves close up with crack details

Choosing the shelf material took more work. We initially tried plain white stock boards, but they looked thin and uninspiring. When viewing the kitchen from the living room, it became clear that adding a warm wood tone on that wall would balance the space and echo other wooden elements like the blinds and stools.

img 80400 4

Most store-bought boards were only 3/4″ thick and not deep or long enough for our vision. We wanted shelves roughly 65″ long, 9″ deep, and just over 1″ thick. Salvaged boards we found online were the right look but too short or too pricey. So we called local lumber and reclaimed wood yards until we found a shop willing to cut and plane reclaimed boards to our exact specifications.

We ended up at a local outfit that had collected wood from old barns and renovations. They cut and planed two pine boards to our requested size: 65″ long, 9″ deep, and 1 1/4″ thick. The boards came from an old barn and had the character we wanted—age, grain, and imperfections—yet were perfectly straight thanks to the planing process.

reclaimed wood shelves rings detail

The total for the two boards was about $100. That was more than basic lumber, but far less than some salvaged boards we’d considered and precisely what we needed. They had the aged appearance we wanted while being straight, level, and ready to finish.

reclaimed wood shelves raw before stain color

At first we considered simply sealing the boards to preserve their natural color, but after living with them briefly we felt they read a bit too orange next to our stools and floors. The shop kindly gave us a small scrap from the same batch so we could test stain options before treating the full-length shelves.

We experimented with a vinegar and steel wool solution, a method that can neutralize warm orange tones and introduce subtle graying while still showcasing wood grain and imperfections. We soaked pieces of steel wool in distilled white vinegar for about a day, then tested different strengths on the scrap piece, alongside a straight gray stain sample. The vinegar-and-steel-wool wash softened the orange undertone nicely on the scrap and was closer to the color of our kitchen stools once it dried.

reclaimed wood shelves staining technique with vinegar and steel wool

However, when we applied that same treatment to the full boards, the result differed from the scrap. One board reacted with a much redder tone than expected. That was disappointing, but we tried a corrective approach: a graywash made from a small amount of gray paint heavily diluted with water (roughly five parts water to one part paint). Sherry brushed the wash on and wiped most of it off, working similarly to applying a stain.

reclaimed wood shelves vinegar stain dried colors

The graywash dramatically reduced the red tone while keeping the grain and the character of the reclaimed wood intact. It didn’t create a perfect match to the stools or floor, but it blended nicely into the kitchen’s palette. Ultimately we embraced the variation—several different wood tones in the same room look cohesive when they share a similar warmth and texture.

reclaimed wood shelves close up of cracked details

For mounting, we used sturdy brackets and anchors. One side was secured into a stud and the other side used heavy-duty anchors to ensure the shelves stay solid under everyday use. We set the distance from the countertop to the first shelf at 18″, matching the gap between the counter and the upper cabinets on the opposite wall. The two shelves are spaced 13″ apart, which gives plenty of room for plates, glasses, and decorative items without feeling cramped.

reclaimed wood shelves white kitchen

In practical terms, the shelves add depth, warmth, and a hint of rustic character to an otherwise crisp, white kitchen. They offer flexible storage and a chance to rotate decorative items and plants, which keeps the space feeling fresh. As a final note: if you try the vinegar/steel wool technique, always test on scrap wood first. Reclaimed boards can react differently, and testing helps you avoid surprises on the finished pieces.

reclaimed wood shelves angle view

If you want more shelving ideas or DIY projects, look for posts that collect multiple shelving concepts and step-by-step projects. And if you’d like to see these shelves in context, they appear in our kitchen tour video at about the two-minute mark.

Note: if you’re reading this in a feed reader you may need to view the original post to access the video.

All told, these reclaimed wood shelves were worth the extra effort. They bring a bit of old-barn character into the kitchen, work beautifully with polished metal accents, and give lots of joy whenever we rearrange what’s on them. Also: three of the plants that debuted with the kitchen are still thriving—a small victory we like to celebrate.

* This post contains affiliate links *