Day 2: Our Bathroom Renovation for Grandma
Yesterday you saw Day Numero Uno of what I’ve affectionately nicknamed “Operation Granny Chic.” The mission: update my grandmother’s bathroom in a tight three-day renovation. With all the prep work completed on Day 1, Day 2 focused on painting and installing new floors—until one small obstacle demanded attention first.

That big rust stain on the duct by the floor needed to be fixed before we could paint, since paint alone would have bled through. A quick coat of Rustoleum stopped the corrosion and sealed the surface—simple, fast, and effective.

For the walls we chose Benjamin Moore’s “Hint of Violet,” a soft violet with subtle gray undertones. Granny loves color—especially purple—so we wanted something cheerful but not overpowering in the small space. The plan was to keep the paint muted and introduce bolder accents through accessories, textiles, and hardware to maintain balance and keep the bathroom feeling open.

We painted the walls and the slanted ceiling in two quick coats. In compact rooms like bathrooms, painting the ceiling the same color as the walls visually expands the space and reduces the “chopped up” feeling that different colors can create. By lunchtime we were ready to move on to the new flooring.

The existing floor was an old sheet vinyl—neutral and not terrible for its age, but Granny wanted an updated look and more texture. Given our budget and time constraints, peel-and-stick vinyl tiles were the obvious choice: textured, affordable, and easy to install. We also decided not to remove the sink or toilet because of the house’s older plumbing; avoiding plumbing work reduced risk and kept the project on track.

We’d installed stick tiles before, so after a short warm-up we got back into the rhythm. The main advantages of peel-and-stick vinyl are speed and simplicity: no wet saw, no thinset or grout, and a low price point (we bought ours for 99 cents per tile). The crucial part is fitting each tile tightly against its neighbors to avoid visible seams; we pressed every tile firmly to ensure a seamless look.

Cutting the tiles is easy—score with a utility knife, then bend and snap. They break cleanly and are forgiving for DIYers. The most time-consuming part of the job was fitting tiles around fixtures in Granny’s compact bathroom: so many small cuts. Because we weren’t removing the toilet, I made paper templates to trace around awkward shapes, then transferred those outlines to the tile for accurate cuts.

For templates I usually use cardstock, but Granny only had a spiral notebook on hand. I taped it into place, cut around the toilet to create the shape, then taped that template to the tile and sliced along the line. After bending and snapping out the unwanted section, I tested the tile’s fit with its backing still on, then peeled and stuck it down.





After laying about 23 tiles and working for roughly four hours, the floor was complete. The textured vinyl tiles made a dramatic difference compared to the old sheet vinyl, and they pair beautifully with the soft violet walls. We left Granny seven spare tiles so she can patch any gaps if the toilet or sink is replaced later.

With paint and flooring finished, we moved on to refinishing some of Granny’s existing hardware. Her cabinet pieces looked like they dated from the 1980s or 1990s and were peeling, so we sanded them smooth and sprayed them with Valspar’s “Indigo Streamer” in a satin finish. The navy looks deeper in person than it does in photos and adds a fresh, unexpected pop against the white fixtures and lavender walls.


We had planned to replace the hardware with chrome, but the existing holes weren’t standard size. Reusing the original pieces turned out to be a blessing: they fit perfectly and a navy finish gives the space personality without major carpentry work.

Other Day 2 tasks included adding a playful blue glass knob to the medicine cabinet and reusing existing holes to hang a towel ring on the duct—Granny said it had been there for years and my dad confirmed it was fine to use. We also replaced a couple of electrical outlets, including a burned one near the floor, after an electrician inspected the wiring to ensure everything met safety standards.



By the end of Day 2, our checklist looked solid. We’d completed painting, repaired problem areas like the rusted duct, installed new peel-and-stick vinyl flooring, spruced up hardware, and handled electrical safety. What remains for Day 3 are the finishing touches that will bring personality and function back to Granny’s bathroom.
Brainstorm colors & go shopping for accessories (Day 1)Spackle/sand/caulk everything to prep the room for paint (Day 1)Rebuild the cabinets a bit so they look more balanced (Day 1)Prime and paint the cabinets for a more updated and open look (Day 1 & 2)Paint the entire room, including the ceiling (Day 2)Fix a few issues, like a rusted duct and an old dingy corner below the sink (Day 2)Redo the floors, which were that old sheet laminate stuff (Day 2)Revive some hardware/accessories with a fresh finish (Day 2)- Make & hang curtains to add some charm (Day 3)
- Bring in some meaningful art (Day 3)
- Add some functional/personal accessories to finish things off (Day 3)
- Reveal the whole shebang for Granny (Day 3)
Tomorrow’s post will show the official before-and-after photos and capture the reveal to Granny, along with a full budget breakdown once we tally receipts. In the meantime: have you used peel-and-stick vinyl tiles for an affordable bathroom remodel? Did you make paper templates for tricky cuts, or do you have another method that works better? We’d love to hear your tips for small-space, budget-friendly bathroom renovations.








