DIY Colorful Wood Accent Wall Tutorial
Today’s project isn’t a whodunit, but it does involve a satisfying mix of planning, paint, and a lot of thin wood lattice to create a colorful, textured wall in our son’s bedroom. Below is a clear, step-by-step account of how we built this striped wood wall treatment, from color selection to the finishing touches.

When we last showed this room in July, we had installed an upholstered headboard and a built-in bookshelf. That update made the room much more functional and cozy, but the tall wall at the foot of the bed—more than nine feet high because of the vaulted ceiling—still felt like a blank canvas that needed personality.

After adding a large, colorful wall mural in our daughter’s room, our son wanted something bold and cheerful too. We decided to build a wall treatment using thin horizontal planks—specifically primed lattice molding—so the finish would read more like a subtle textured stripe than chunky shiplap. The thin 1/4″ lattice gives visible wood texture without competing with the wider planks on the ceiling.

We considered wallpaper, decals, beadboard, and other options, but ultimately wanted something lighter in scale that complemented the ceiling rather than matching it. Using narrow lattice strips also let us incorporate many pieces (60 strips total), creating a more gradual, refined gradient across the wall.

With the layout decided, our next big choices were the palette and how many colors to use. We wanted an “ocean-at-dusk” vibe to reflect how much our son likes the beach, and he gravitated toward blues, greens, yellows, and oranges. After narrowing down options together, we selected ten Sherwin‑Williams colors and arranged them into a loose, imperfect gradient using a digital mock-up to help visualize quantity and placement before buying materials.

The final palette produced an “ocean-at-dusk meets modern rainbow gradient” result and included the following Sherwin‑Williams colors:
- Sumptuous Peach (SW-6345)
- Sweet Orange (SW-6351)
- Jersey Cream (SW-6379)
- Rice Paddy (SW-6414)
- Celery (SW-6421)
- Liveable Green (SW-6176)
- Waterscape (SW-6470)
- Comfort Gray (SW-6205)
- Vintage Vessel (SW-9050)
- Raindrop (SW-6495)
Creating a detailed plan up front helped us estimate how much lattice to buy and how many cuts of each length and color we’d need. That preparation saved time and reduced waste during execution.
Choosing the Colors
We aimed for a palette that felt familiar and soothing—beachy tones moving from warm sunset hues at the top to cool watery colors at the bottom. Involving our son in the selection made the result feel personal, and having a mock-up helped us space out color transitions so the gradient would feel balanced and organic.
Painting & Prep
We used primed lattice molding because it’s thin, textured, and affordable. The 1.5″ wide strips allowed us to install many narrow boards for a subtle gradient effect. First, we cut the lattice roughly to length based on the heights needed around a built-in bookcase and the closet door. Leaving pieces slightly long made it easier to account for walls that weren’t perfectly square—trim to final length during installation.

With many colors and limited workspace, we painted the lattice in batches using small foam rollers over a drop cloth. Involving our son in the painting process made it more fun and gave him ownership of the space. We painted in two batches to accommodate drying and space constraints.


Installing the Painted Wood Strips
Before nailing anything, we located studs with a stud finder and drew light vertical pencil lines to mark them. Nailing the lattice into studs ensures a secure hold. Because we had the bookcase in place, we started with a full-width strip across the top of the shelf and worked both up and down the wall from that reference point to avoid ending with tiny slivers at the shelf edge.

We attached boards with 1 1/4″ finish nails using a nail gun and used small scrap pieces of lattice as consistent spacers between each strip. The 1/4″ lattice produces subtle shadow lines that read as texture from a few feet away, rather than bold, deep grooves.


We progressed up the wall installing the medium-length pieces, then filled in the bottom with the shorter strips. For the upper section where the gradient shifted to warm sunset tones, we painted a second batch and installed those pieces in the same way—spacer, nail into stud, and check level frequently. Where an HVAC vent sat in the wall, we removed the vent cover and carefully cut boards to fit around the opening. When the cover was reattached, the cut pieces blended seamlessly.




We were fortunate not to need narrow filler strips at the top or bottom; the slightly larger white gaps at those seams read as part of the trim and don’t draw attention the way a thin colored sliver might.
Finishing Touches
Cutting, painting, and installing took about four hours total across two days to allow for drying time. The final touch—patching nail holes and smoothing them—made a big difference in the polished look. We filled holes with spackle, sanded them smooth the next day, and then used our saved foam rollers to touch up each color spot. That final hour of work is worth it for a seamless finish.



The finished wall brings a surprising amount of warmth and cheer to a small room. It’s the first thing our son sees in the morning and the last thing before lights out, making the space feel lively and personal. We’ll probably add a shelf or a piece of artwork later, but for now the room feels complete and cozy.


You could reproduce a similar gradient by taping and painting stripes directly on the wall, but the raised lattice adds a dimensional quality that’s especially attractive in person. We also swapped the artwork above the bed for a bright painting that complements the palette and gives the room a playful focal point.


So that’s how ten test pots of paint and a lot of lattice came together to create a linear, abstract sunset wall—our “son-set.” If you’re planning a similar DIY, the key takeaways are: mock up your color arrangement, buy extra lattice for spacing and mistakes, paint the strips before installing, nail into studs for security, and don’t skip the spackle and touch-ups for a professional finish.

We’ve used lattice for other inexpensive wall projects before, and it’s a versatile material for board-and-batten, narrow planking, or decorative molding. There are many ways to approach colorful wall treatments—pick your wood, choose a palette you love, decide on spacing and pattern, and enjoy transforming a plain wall into a room-defining feature.
*This post contains affiliate links, which may provide a small commission at no additional cost to you.








