DIY Cork Wall to Showcase Kids’ Art
When your child reaches the stage of wanting every drawing, painting, and stickered creation displayed, you quickly realize you need more wall space. We solved that by building a large, framed cork board wall that runs from window to window — a dedicated place to showcase our daughter’s artwork and define a little corner of the room as her workspace.

Before this project our smaller fabric-covered cork board — the “bulletin board” that had been in the office — was overflowing. The plan was simple: expand that display area across the entire space between the windows so there would be plenty of room for art, and so the area would feel like Clara’s (and eventually her brother Teddy’s) creative corner.

Creating a Stable Backing for Cork Tiles
To keep the cork tiles from puncturing the drywall and to make the installation more secure, we mounted thin wood backing to the wall first. This way the squares could be glued to a continuous surface, avoiding hundreds of tiny holes from pushpins over time.

We used three 2 x 4′ sheets of 5mm underlayment and trimmed them to fit the 43″ gap between the windows. To ensure identical edges, I clamped the panels together and cut them in a single pass with a circular saw.

Each panel was attached to the wall with a few 2″ wood screws, driven into studs found with a stud finder for a sturdy mount. We left the top panel sitting slightly below the window trim to create a subtle recessed effect, and added two narrow trim strips along the top and bottom to give the whole installation a finished, framed look.


Gluing Cork Tiles to the Backing
With the wood backing in place, we attached cork tiles using a spray adhesive that lists cork-to-wood bonding on the label. To avoid overspray inside, I applied adhesive to the backs of the cork squares outdoors, and Sherry then carried each tile in and pressed it onto the prepared backing. The approach worked well and the tiles bonded quickly.

Tiling the wall went fast, especially since most of the surface used full squares. We worked in teams, placing full tiles first and then cutting and installing edge pieces. For partial tiles we marked the cut lines with a pen and ruler and trimmed with ordinary scissors. Making several small snips instead of one long cut helped prevent the cork from cracking and gave cleaner edges.


Once all the squares were in place, the seams were still visible but not distracting. We considered covering the surface with fabric or paint, but liked the natural texture and color of the cork, and expected the lines to fade once artwork was pinned up, so we left it as is.

Arranging and Managing Kids’ Artwork
The best part was watching Sherry and Clara arrange the art the moment the wall was finished. Clara helped decide placement and quickly embraced her new gallery, immediately creating more artwork to add to the display. We explained that even with a larger board, some pieces will need to be rotated out to make room for new work — and she already enjoys the challenge of choosing what to swap.

We keep a box of other drawings and crafts, and use a phone app to photograph and archive the artwork with the plan of someday making a photo book of Clara’s pieces. That digital archive helps preserve memories while keeping the gallery fresh.

Some favorite pieces already on the wall include a family portrait Clara drew when she learned she would soon have a baby brother, and a playful “bear-on-a-stick” craft that shows how her drawing skills are evolving. Small decorative touches — like a felt name banner that a reader sent as a welcome gift — personalize the display and hint that Clara will eventually share the space.



Practical storage and supplies keep the area usable: repurposed tin cans hold pencils and crayons, and a nearby desk provides a place for new creations. The cork wall does limit curtain options, but we’ve been considering inside-mount shades to keep the windows functional without covering the gallery.

We love how the new cork wall adds color and personality to the office while celebrating our child’s creativity. It’s a simple, effective DIY solution for displaying kids’ artwork and creating a flexible, family-friendly gallery space.
Update: We shared an update later about an unexpected issue with the cork and how we addressed it — how we dealt with the cork board curveball is part of the project’s story.
Note: This project was originally published in May 2014.








