DIY Faux Roman Shade Tutorial
I’ve always loved working with fabric, and when I realized I’d never tried a Roman shade—even a fixed, purely decorative one—I decided it was time to make a faux Roman shade for a bare kitchen window. This step-by-step account explains how I created a stylish, non-operational Roman shade that adds texture and color without blocking light, perfect for spaces where you want the look of a shade but not the function.

The window in question opens into our sunroom, so it didn’t need a functional shade that opens and closes. If you enjoy keeping window coverings open to let light flood in, a faux shade is a great option: it creates a finished look without requiring hardware or cords for daily operation.

To begin I measured the window and decided on a finished shade about 47″ wide by 18″ long. I cut a fabric rectangle 49″ wide to allow for one-inch hems on each side and 30″ long so there would be enough material to create the soft folds that mimic a Roman shade.
We used Gazebo Cloud by Braemore for this project. I bought the yardage locally for a great price, but the fabric is also available online from several retailers. The pattern and color worked really well in the kitchen, tying the wall color to tile and rugs in a subtle but effective way.

First step: hem all four sides of the 49″ x 30″ rectangle. I used no-sew iron-on tape for quick, clean hems—Heat N Bond or a similar heavy-duty product works well. If you prefer, standard machine sewing produces an equally durable finish.

Next, cut a 1×2 scrap wood strip to the finished width of the shade (47″). If you don’t have a saw, many hardware stores will cut a board to size for you. I wrapped small fabric scraps around each end of the wood and secured them with white duct tape so raw wood wouldn’t show at the sides once the shade was mounted.

Then I rolled the top edge of the fabric around the wood and taped it to the back of the board so the front of the shade would look seamless. Make sure the tape is applied to the back and bottom surfaces of the board so it remains hidden once the shade is hung. The flat face of the board is the part that gets screwed into the wall.

To create the Roman-shade appearance, I formed soft fabric loops about 5″ tall across the front of the fabric. I worked on the floor and used a nearby rug as a straight reference so the folds stayed even. Each loop was folded and secured with straight pins from the back so only a tiny bit of pinning showed on the front. The pins hold the fabric in place without substantial bulk, keeping the folds soft and natural.

The technique was simple: pin rows to create two primary folds roughly 5″ apart and then pin the bottom so the shade appears to roll or billow slightly. I adjusted and re-pinned a few times to get the lines straight and balanced; the process involved some trial and error, and patience paid off. Cutting and hemming took about twenty minutes; establishing and refining the folds required another thirty to forty minutes.

I briefly considered tacking the folds with a few stitches once I liked the look, but the pins held securely and I preferred to avoid any additional puckering that hand-stitching might cause. In the end, the pinned folds felt solid and looked smooth, so I left them as-is.

To mount the shade, we predrilled three holes through the wood strip and screwed it directly into the wall. The fabric is simply pulled aside while screwing the wood to the wall, then released so the fabric hangs in front of the board and conceals the screws. No fasteners pierce the visible face of the fabric.



The finished shade instantly warmed the window and created a more polished look in the kitchen. The fabric ties the wall color into the gray tile and rugs, acting as a visual bridge that balances the room. It also lengthens the perceived height of the window without obstructing any light.

Detail shots show how clean the assembled front looks—no bulky hardware, no visible stitching, and minimal pinning that disappears when viewed from a normal distance. For roughly an hour of work and the cost of a yard or so of fabric, the impact was big and the execution simple.

Have you tried any faux decor projects lately—faux plants, faux fruit arrangements, or other decorative illusions to tidy up a room? This faux Roman shade is a low-effort way to add style and polish without sacrificing light or functionality.
Psst— Want to know where we sourced items from our house or what paint color we used? Click the button below to explore our shop and sources.








