Objectales

Popular

DIY Thrift Store Coffee Table Upcycle with Blue Stain

featured 64885

You know we love tinkering with furniture, especially when it improves how our outdoor spaces look and function.

making-an-outdoor-coffee-table-blue-stain

But first—guess what arrived? I’ll give you two hints: a previous “Take a Seat” project we mentioned and the photo below. Both were pretty strong clues. The delivery itself was low-key: Sherry was on a conference call, a big truck pulled up, I handed our baby off to her, ran outside, and a big box came off the truck. Clara was out with Grammy, but when she saw the new outdoor sofa later she declared it “perfect!” and “I love it!” That sealed the deal. This moment also marks the end for our old white coffee table that had been a fixture in our sunrooms for years.

img 64885 2

The old table was really just a thrift-store tabletop screwed onto an Ikea Lack base—an inexpensive, temporary solution that stayed far longer than intended. After nearly a year outside, moisture finally did it in. If you ever wondered how Lack tables fare in damp conditions, the answer is: not great.

img 64885 3

We had another table in mind to replace it: a metal-and-glass thrift-store piece that has moved with us through three houses. It anchored our first living room and even spent some time on the patio at our previous place. The metal frame has held up beautifully outdoors, but the glass top was always a hassle—constantly collecting pollen, dust, and water marks until it looked foggy.

img 64885 4

To make the table more practical for outdoor use, we decided to build a new wooden top that would be more forgiving of dust and dew and better suited for the patio. We kept the glass in storage in case the table ever moves back indoors, but for now the metal frame is the only piece being reused.

img 64885 5

At Lowe’s we found a pre-cut board for $19 that matched the exact width (20″) and thickness (¾”) we needed, saving us a lot of cutting and measuring. It did need a small trim on one end, but otherwise it was the right shortcut for the project.

img 64885 6

Our main concern was preventing the panel from warping from moisture or sagging under weight. Thicker stock would have sat proud of the metal frame, so instead I reinforced the thin panel with X-shaped bracing on the underside.

img 64885 8

I ripped a 1×3 board lengthwise on the table saw, cut those pieces to fit into an X under the tabletop, and notched them where they cross so they nest together. The notches weren’t perfect, but they held the pieces snugly and provided the rigidity the thin panel needed.

img 64885 9

We liked the raw wood look against the metal frame, but with the new outdoor sofa in place it felt unfinished. Since the top needed weather protection anyway, we decided to try a colored stain for a bit more personality.

img 64885 10

We chose River’s Run semi-transparent stain in Olympic Maximum, a product designed for outdoor furniture, decks, and fences. Because colored stain was new to us, we tested on the scrap piece we trimmed off: we applied a Minwax pre-stain conditioner, then tried one coat versus two coats of the blue stain, and even brushed Dark Walnut over parts to see how a warm topcoat would alter the color.

img 64885 11

We ultimately went with one coat of River’s Run. Two coats looked almost painted and lost the wood grain, and the Dark Walnut overcoat looked too brown and muddy next to the metal frame.

After applying Minwax Pre-Stain Wood Conditioner, we brushed on the single coat of blue stain. It looks intense when wet and can be a little alarming, but once it soaks in and dries the tone becomes more subdued and natural.

img 64885 13

img 64885 14

For protection, we applied three coats of Safecoat Acrylacq sealer to both the top and bottom of the board after the stain dried. With a finished sealer, the wood should resist rain and the fine mist that sometimes reaches the furniture during heavy storms, giving the table better outdoor durability.

img 64885 15

Back to the sofa for a moment: we’re really pleased with it. The wicker shows subtle color variation and striping, it feels sturdy and comfortable, and the cushions are dense enough to promise lasting support. They might need a little breaking in, but Burger has been working hard on that task.

img 64885 16

I was initially unsure about a blue tabletop, but the stain ties in with blue undertones in the tile and still reads rustic against the metal base. From some angles it even seems to pick up a hint of blue in the woven sofa weave.

img 64885 17

It’s exciting to finally have real, comfortable furniture on the patio. We spend a lot of time out back when the weather is warm, so a shaded, durable seating area has been long overdue.

img 64885 18

The rest of the sunroom still feels a bit sparse, which is why many of these shots are framed tightly. We already have a plan to add more seating and function to the space—after all, if we ever want to reclaim the sofa for ourselves, Burger will need another place to hold court.