DIY Upholstered Headboard: Step-by-Step Guide
Adding a headboard instantly elevates a bedroom, making it feel finished, cozy, and inviting. Building a DIY upholstered headboard is affordable and straightforward — ours cost just $66 — and lets you control the fabric, size, and style so the result perfectly fits your room. We’ve built many over the years and this classic rectangular, fabric-covered headboard is one of our favorites.

Below we walk through the step-by-step process to make the top-left headboard in the grid above — a timeless, upholstered panel — and we also mention a few other headboard styles to try.
- How to make a channel-tufted headboard (in the grid, top right)
- How to make a daybed-style headboard (bottom left)
- How to make a wall cleat to hang a headboard (bottom right)
Table of Contents
Materials & Tools

Your exact list may vary, but the essentials for a simple upholstered headboard are:
- Upholstery fabric (amount depends on headboard size — we used 2 yards)
- Extra-loft batting (we used about 4 yards for two layers)
- 5/8″ plywood or MDF for the panel
- Two or three 1×3″ whitewood boards for edging and reinforcement
- A miter saw, table saw, or circular saw (or have the store cut plywood to size)
- Heavy-duty staple gun and staples
- Screwdriver and screws (and a Kreg jig or pocket-hole screws if you plan to join boards)
Why Add A Fabric Headboard?
We swapped out our old four-poster look for a softer, more comfortable backrest for evenings spent reading or watching TV in bed. Beyond comfort, a fabric headboard quickly adds personality and polish: the right material can introduce color, pattern, and texture, or create a calm, neutral backdrop depending on the mood you want.

Without a headboard, a bedroom can feel unfinished — adding even a simple upholstered panel makes the space feel intentional and cozy.
Step 1: Build Your Wood Frame
You can keep the frame very simple or add custom shaping. For a straightforward rectangular panel, cut a sheet of plywood to the height and width you want or have the store cut it. For a queen bed we made ours 65″ wide by 31″ tall, but tailor the size to your bed and room.
In our case we built a sturdier plywood frame and added narrow side pieces so the headboard could wrap around the remaining bedposts on our Ikea frame. We attached two 1×3 boards to each edge using pocket-hole screws, which creates a clean, stable profile that hides the posts once upholstered.

If transporting a full plywood sheet is a problem, have it ripped in half at the store and rejoin the pieces at home with bracing boards screwed across the seam. It’s a practical workaround that stays hidden under the fabric.

Before upholstering, test-fit the frame around the bed to confirm the wrap-around pieces and proportions look right.

Step 2: Add Your Batting Layer
If you can wrap a present, you can upholster a headboard. Start by laying batting on the floor and placing the wood frame on top. Allow a 2–3″ overhang on all sides so you can wrap and staple it to the back.

Pull the batting tight and staple it every few inches along the back edge. Treat corners like a present: fold and smooth so the front stays flat and neat. Two layers of batting create a plush but tidy surface; if you want even thicker padding, consider attaching upholstery foam to the plywood with spray adhesive instead.

Repeat the wrapping and stapling for the second layer of batting. Avoid over-bulking the edges; too many layers can make stapling into the wood difficult.

Step 3: Staple On Your Fabric
Iron your fabric first to remove creases. Lay it face down, place the batting-covered frame on top, and trim the excess so you have a few inches to wrap around the back. Pull the fabric tight and begin stapling, starting with one side, then the opposite side, keeping strong tension so the face remains smooth.


After securing the sides, staple the top and bottom edges the same way, keeping the fabric taut to avoid wrinkles and sagging. Fold and tidy the corners neatly on the back so the front looks seamless. This step can take less than an hour once you get into the rhythm.

Flip the headboard upright and admire the finished, upholstered face — smooth, cushioned, and ready to hang.

Step 4: Hang Your New Headboard
You can attach a headboard to the bedframe or mount it to the wall. Wall mounting is often sturdier: a french cleat is a simple, reliable method — one slotted board on the wall, a matching angled board on the headboard. Pre-made metal cleats are also available if you prefer.

Tip: Hang the headboard so its lower edge sits at or just below the top of your mattress to avoid any visible gaps.
For our bed without posts, we screwed the new upholstered panel into the existing wooden headboard frame, making sure to use screws short enough not to protrude through the front.

Step 5: Enjoy Your Handiwork
Once mounted, push the bed back into place and enjoy the new focal point. A fabric headboard adds immediate warmth and cohesion to bedding and accessories, tying colors and patterns together for a curated look.

We liked how the floral fabric connected the yellow gingko pillows and the turquoise rug, creating a cohesive palette. Even our dog looked right at home in front of the new backdrop.

DIY Upholstered Headboard Cost
Here’s a basic budget breakdown from our build:
- Wood frame (plywood and bracing boards): $22
- Two layers of extra-loft batting (on sale): $4
- Designer discount fabric (reused from a previous project; original price was about $20/yard): value ≈ $40
- Total spent: $66 (assuming reused fabric)

At roughly $66 (without counting tools you may already own), this approach is significantly less expensive than many retail upholstered headboards and lets you pick the fabric and finish. With basic woodworking and a staple gun you can create a custom, polished headboard that suits your space and budget.
*Note: Some items in this post were originally linked to suppliers. Prices and availability vary; adjust materials and methods to suit your needs and budget.








