Objectales

Popular

How to Add Crown Molding to Kitchen Cabinets

featured 40880

We finally added trim. As I mentioned in last week’s Day In The Life, we decided to give our wall-to-wall desk a more finished, built-in look by installing simple base trim along the bottom of the cabinets. The cabinet bottoms were feeling a bit unfinished, so adding molding was the quick upgrade we needed.

img 40880 1

I measured carefully and took a little cheat sheet to the store. When you’re cutting angled miters it’s easy to make the wrong cut, so I mark the direction of each cut clearly. Little reminders help avoid costly mistakes.

img 40880 2

One important constraint was height: there was under 3″ between the floor and the cabinet doors, so a standard baseboard wouldn’t fit. I found trim that matched—or was almost identical to—the profile we used around our bathroom mirror, and three 8-foot pieces cost just $14. This budget-friendly trim gave us the low-profile built-in look we wanted.

img 40880 3

Back home, I measured and re-marked each piece, again noting the direction of each miter. Double-checking orientation and angle right before cutting prevented backwards pieces and wasted trim.

img 40880 4

Even at the last second I confirmed the blade and trim were aligned correctly. That kind of habit saves time and keeps the job looking sharp.

img 40880 5

I checked the length and angle of each cut as I went to ensure everything would fit neatly at the corners.

img 40880 6

Once the pieces lined up, I nailed them in place. I started the finishing nails with a hammer and then used a nail punch to sink the heads slightly without damaging the trim—this makes for a cleaner finish when caulking and painting later.

img 40880 7

The miters and ends weren’t perfect, but caulk easily fills small gaps. I usually smooth caulk with my finger to blend seams and cover slightly sunk nail heads. We haven’t caulked or painted those edges yet, but that’s next on the list.

I used two or three finishing nails per trim piece, fastening the trim to the cabinet face rather than the floor. The trim’s white was already very close to our cabinet color, so we left it as-is for now and plan to paint at the same time we do the caulking for a uniform finish.

img 40880 8

After trimming, the tangled cords under the desk stood out more than before. We’d been ignoring them, but once the trim was in place they started to ruin the polished look, so we tackled cable management next.

Sherry’s side was simple: she has just two devices plugged into a small power strip (computer and lamp), and the outlet is hidden behind the desk. We had the forethought to plug and hide her strip before finishing the desk, and a small gap behind the cabinet allowed us to tuck the plug out of sight so the countertop still appears seamless from above. Ignore the raw underside of the counter in the photos—it’s out of sight unless you’re very short, and we’ll address it eventually.

img 40880 9

My side was trickier: a larger power strip, more devices (computer, phone charger, external drive) and a bulky wireless router made tucking everything behind the cabinet impossible. Instead, I mounted the power strip to the wall just under the counter so it would sit out of sight while keeping cords organized.

img 40880 10

The strip already had screw notches, so I made a simple paper template to mark the exact drill points. My process:

  • Tape a piece of paper to the back of the strip and poke holes through the mounting notches with a pen.
  • Hold the strip where I wanted it and tape the paper to the wall.
  • Remove the strip—the paper stayed in place with two red guide dots.
  • Drill through the paper so my anchor holes were perfectly located, then mount the strip and plug everything back in.

img 40880 11

img 40880 12

The mounted strip still looks a little busy up close, but from across the room it’s hardly noticeable—your eye is drawn to the fresh trim instead. We still need to hang art, install window treatments, add proper lampshades, and tidy desk accessories, so there’s more to do. But the built-in trim and hidden cords make a big difference in the overall presentation of this home office.

img 40880 13

For comparison, here’s how the desk looked before we added the bottom trim and organized the cords. Spending $14 on trim felt like a small price for the added polish and the nearly built-in appearance it gives the space.

img 40880 14

img 40880 15

The room has come a long way in the past month, and since we spend so much time in here it’s worth taking the extra steps to make it feel finished and functional.

img 40880 16

We debated adding trim to the side edges where the cabinets meet the wall to make everything flush, but after multiple discussions we decided it wasn’t worth the extra cutting and fussing around the baseboard. Doing that properly would have required a lot of careful cuts and would likely have taken longer than we wanted—doing it halfway would have looked worse. Once we caulk the miters and nail heads and touch up the paint, this desk project will be complete.

Here’s the final tally for our 13-foot, wall-to-wall double desk:

  • Cabinets (from Habitat For Humanity ReStore): $6.30
  • Kilz Clean Start No-VOC Primer: $0 (leftover from another project; would be around $20 to buy)
  • Electric sander & sandpaper: $0 (already owned; would be about $25 to buy)
  • Benjamin Moore Advance paint (in Decorators White, satin): $40 (we saved 10%)
  • Pre-primed & unprimed wood to build up cabinets (from Home Depot): $51
  • Framing lumber for the counter (from Home Depot): $27.30
  • Stain & poly for the top: $0 (already owned; would be about $8 and $20 if purchased)
  • Drill bit for cord holes in the counter: $4 (from Lowe’s)
  • Trim for the bottom: $14 (from Lowe’s)
  • TOTAL: $142.60

img 40880 17

We’re already on to the next office project and can’t wait to share it—Sherry’s a little sore from the work, there’s paint in her hair, and she’s not finished yet. More photos and details coming soon. Have you ever added trim to make furniture look built-in or tackled full-scale cord organization under a desk? We’d love to hear about your DIY solutions.

Psst—To follow our entire desk-building journey from start to finish, here’s the planning post, the post about buying the cabinets, our cabinet research, sanding and priming, building them up to desk height, building and staining the counter, and drilling cord holes.