How to Build a Busy Board with Latches for Kids
Happy New Year! Are you making resolutions? We’re still debating ours (Sherry loves a list), but for now let’s talk about the project we finished just before the holidays: a DIY latch board — a busy board for toddlers that encourages fine motor skills, hand-eye coordination, and plenty of curious fiddling.

We first heard about latch boards when Clara’s cousin Elsa received one a year earlier and loved it. Kids seem naturally drawn to anything that twists, flips, or clicks, so we waited until Clara had the patience for fiddly tasks before making one for her. When she reached that point, we headed to our favorite local hardware spot — a near-legendary warehouse filled with old skeleton keys, latches, knobs, and other treasure-like finds — to gather parts.

We picked up an assortment of hinges, window latches, door bolts, and a couple of decorative carabiners, then spread everything out at home to plan the layout while Clara napped. We pared down our haul to avoid redundancy and to keep the finished board a manageable size for little hands.

To build the backing, we used spare 1×4 and 1×3 boards we had in the basement and joined them with a Kreg jig rather than buying a single cut board. The layered look felt authentic and weathered — similar to other projects in our home — but you can absolutely buy a single board cut to size if you prefer to skip jig work.

After assembling the layers we trimmed them to a 12″ x 12″ square on the table saw and sanded the edges and corners to keep the board safe and comfortable for small hands.

For a bit of visual interest, we stained the top with a Dark Mahogany stain and painted the edges with a bright Benjamin Moore Citron left over from another project. We taped the edges for a crisp line, distressed the surface lightly to give it a weathered feel, and used a small foam roller to ensure even paint coverage. After the paint dried, we sealed everything with a low-VOC Acrylacq polyurethane to add durability while keeping the finish child-safe.

With the finish cured, we started attaching the hardware. A last-minute hardware run on Christmas Eve let us pick up one final hinge so we could finish the board in time. The final layout included a mix of hinges, window latches, a few door bolts, and two decorative carabiners mounted to small drawer pulls — an arrangement designed to give a variety of motions and grips for a toddler to practice.

Overall material cost was about $35. That was somewhat higher than some store-bought options, mainly because we splurged on two decorative carabiners (about $9 total) and a locking window latch ($4). If you substitute simpler hardware or find lower-priced parts, you can reduce the cost substantially. For us the carabiners ended up being Clara’s favorite features, so it felt worth it.

We were careful about safety: the board is roughly the same weight as Clara’s wooden puzzles and has smooth, rounded edges. All the latches and hinges are mounted externally — nothing like internal cabinet or door locks that could present a hazard. After a week of play she’s been dragging it around with no pinched fingers or problems. Several teachers we know also use similar latch boards in classrooms and report they’re great for building fine motor skills.

We captured a short clip of Clara opening her latch board on Christmas morning and her reaction was exactly what we hoped for: delight and focused curiosity. If you’re thinking about making a DIY latch board or busy board for a toddler, focus on varied hardware types, smooth edges, secure fastenings, and a durable, non-toxic finish. It’s a simple project that can provide hours of developmental play.
Anyone else tooling around in old hardware stores or building latch boards for little hands? It truly is like being a kid in a candy store.








