How to Build a Double Desk from Used Cabinets
The transformation of $6 hotel nightstands into a built-in, wall-to-wall desk for two is well underway. Previously we removed the hardware, sanded, and primed each piece to prepare them for paint.

Before painting, we had to do some basic construction: attach the nightstands in pairs and raise them about four inches so the finished surface would sit at standard desk height. But first we decided to place them in the room to confirm the layout.

Once we moved them into position we realized the original plan—three pairs across the wall—felt cramped. With six cabinets there was barely any room for chairs. A quick rethink and we removed two cabinets, arranging four across the wall (two in the middle and one on each end). The result gave each workstation breathing room and still provided plenty of storage when combined with our double-wide two-tier file cabinet on the other side of the room.

Since the cabinets were inexpensive, it was an easy choice to let two go. We might repurpose the extras—Sherry has talked about making a play kitchen for Clara—so nothing is wasted yet.
For the build-up and visual connection of the middle cabinets we considered several options, from adding a shallow drawer to raising the base, but settled on a simple, cost-effective approach. We bought 1×4 boards (several pre-primed for convenience) and cut them to create a frame that would raise each pair about four inches.

Using a Kreg jig I drilled pocket holes to join the front and sides of the frame, then attached it to the top of the cabinets. You can see how the frame ties the pieces together on the single side cabinet in this photo:

The back piece was made from un-primed 1×4 since it isn’t visible once the units sit against the wall. Choosing pre-primed boards for the visible parts saved time and cleanup even though it cost a few dollars more; given how little we paid for the cabinets, the small premium made sense.

To strengthen the top for a countertop, I added 1×3 braces inside the new frame and attached leftover 1×4 slats across the top to create a secure platform for fastening the countertop later. In the final assembly I’ll raise the slats slightly with washers so everything sits perfectly level when the countertop is installed.


With the structural work mostly finished, the next step was painting. We wanted a clean, crisp white to blend with the built-ins visible from the adjoining dining room, so we tried Benjamin Moore Advance. It’s an alkyd formula that self-levels for a smooth cabinet finish, is water-based, and has very low VOCs—qualities that make it well suited for cabinetry despite a higher price point.
The paint is pricier than typical latex, but by asking at the register we scored a 10% discount, which helped offset the cost. We chose Decorator’s White in a satin sheen; between brush and small foam roller we achieved a smooth, brushstroke-free finish on the doors and visible surfaces.

The Advance paint covered remarkably well. Although a quart would likely have sufficed for just these cabinets, we purchased a gallon so we’ll have the remainder for future kitchen cabinets. Sherry followed a routine of thin, even coats—three total—to ensure uniform coverage across primed surfaces and pre-primed boards.

You can see the difference between one and two coats in photos of the cabinet doors. Each coat took roughly 30 minutes to apply, but the manufacturer recommends long drying times between coats, so the job stretched over several days. The final finish cured smooth and durable—Sherry’s verdict: she loves it.

For safety and to avoid accidental smudges, Sherry painted the doors in the well-ventilated sunroom while Clara and Burger were kept elsewhere. We opened windows and used fans when painting the in-place cabinet bases in the office. Small tricks—like painting on cardboard from old furniture boxes—helped keep the area tidy.


After painting, the white finish helped the two center cabinets read as a single unit. We briefly considered filling the seam between the two doors with caulk or wood filler, but after reattaching them the gap was far less noticeable, so we left it alone.

Everything was built up four inches, painted, and looking clean. Once the doors were reattached the installation really came together.



Next up we’ll add base molding around the bottom and trim the sides so the units read even more like built-ins and hide any exposed wood at the legs. We’ll share those finishing touches and the countertop process soon, but here’s the current budget tally for the project so far:
- Cabinets (Habitat For Humanity ReStore): $6.30
- Kilz Clean Start No-VOC Primer: $0 (leftover; typical cost ~ $20)
- Electric sander & sandpaper: $0 (already owned; would be around $25 to buy)
- Benjamin Moore Advance paint (Decorator’s White, satin): $40 (after a 10% discount)
- Pre-primed & unprimed lumber to build up cabinets (Home Depot): $51
- TOTAL: $97.50 — about the price of a single unfinished base cabinet at a big-box store
We’ll return with countertop details and the final trim work. In the meantime, we’re already enjoying the functionality of our new double desk—two comfortable workspaces that look integrated and were assembled on a very small budget.
To follow the cabinet makeover from the start, see the posts about finding the $6 cabinets, other places we looked, and how we prepped them for paint.








