How to Hang Window Boxes Securely
Hello fellow Pinterest enthusiasts. If you’ve been baking, crafting, painting, organizing, sewing, building, or knitting—and pinning inspiration—it’s time to take part in this season’s unofficial Pinterest Challenge (an idea from Katie to turn inspiration into action). The only rule is simple: pick a pinned project you’ve been meaning to do and finish it. For us, that project was window boxes.

We had two window-box pins saved: one just for the look (those pre-made boxes can be pricey) and a second that was a DIY tutorial in case we needed to build our own. Window boxes seemed like a perfect way to add dimension and soft greenery to our long, boxy ranch-style house. They’re not essential for resale, but they make the facade feel more finished and cheerful, so we decided to give them a try on three windows.

Last week we picked up the window boxes, liners, and brackets at Home Depot. After pricing out building versus buying, the store-made boxes made more sense for our budget and timeline. We liked the clean-lined, mid-century look—they suit a ranch-style exterior well.

Here’s what worked for hanging them on our brick facade.
Step One: Mark the locations carefully. Hold the window box up to the window to ensure it’s centered, then mark where the brackets should go. Use a hammer drill to create pilot holes in the brick for the bracket screws. A hammer drill makes drilling into masonry much easier and more reliable than a regular drill.

Step Two: Attach the brackets following the package directions. Be attentive to the small metal tab included on many brackets—it bends over the top of the box once installed to lock it in place. We learned a couple of practical tips while installing ours:
- Don’t rely on the short, lightweight screws included in the kit for masonry. Use proper masonry screws (we used 2″ masonry Tapcon screws leftover from a previous project), which hold far better in brick or mortar.
- Use a hammer drill for both the pilot holes and to drive masonry screws when needed. Screws set with a regular drill can end up loose and require redoing.

Step Three: Once the brackets are secured tightly, place the window box on the brackets and bend the metal tab over the edge to lock it. The tab is designed to be bendable by hand, though it may require a firm grip or a pair of pliers to seal it down snugly.

Step Four: Insert the plastic liner into the planter. The liners typically include pre-scored drainage spots—pop those out before placing the liner (we used a house key to open them). The liner’s drainage holes should line up with the pre-drilled holes in the outer planter, allowing water to escape properly.

While we worked on the boxes, John and Clara helped with spreading mulch in the yard. It was a family afternoon of simple outdoor chores—and yes, by the end we had a few inchworms on us. Good times.


For planting, I used a practical shortcut: buy mature hanging baskets from a local nursery and divide them into the window box liners. Hanging baskets are ideal because the plants are already established and naturally spill over the edges, giving that cascading look instantly—no waiting for plants to grow out.

I gently removed the baskets from their containers and carefully separated the root balls into smaller sections for each box. Taking care during division helps prevent shock and keeps the plants looking full and healthy once planted.

Then I arranged the sections into each window box for an instant spilling effect—exactly the result I wanted without waiting weeks for growth.

The flowers look charming and relaxed—nothing too formal or overbearing. I like that the planters match the brick tone so the blooms remain the focal point. As the plants continue to fill in and spill more, the window boxes will become even more lush.


In summary: three window boxes installed, a few practical tips to avoid installation mistakes, and a handy planting shortcut using mature hanging baskets. The end result is a simple, attractive addition to our home exterior that brought instant color and curb appeal.

And, yes, that fresh mulch does look pretty inviting.
If you’re joining this season’s challenge and want to share your project, here’s how to add your link if you’ve posted about it on your blog:
- Find the “Add Your Link” button on the challenge page and click it (you may need to scroll).
- Paste the direct URL to your project post (not your homepage) into the URL field.
- Give your entry a descriptive title, such as “Homemade Leaf Wreath” or “Brick-Front Window Boxes.”
- If possible, link back to the inspiration posts and to any tutorials you used so those sources get credit.
If you don’t have a blog, you can share photos through a public gallery on a free photo-sharing site and post that link in the comments. We’re excited to see what everyone has been making—please share your projects and tips.









