Objectales

Popular

How to Install Extra-Thick Crown Molding Without Gaps

featured 61659

Sherry is halfway finished with Clara’s canopy wall update, and we’re grateful to the 900+ readers who commented with votes and ideas. We showed Clara a bunch of mockups and she suggested combining several concepts into one — the kid’s got a great eye, so we’re excited to share the final photos once the project is complete. In the meantime, I crossed something off my list that I’d been meaning to do for weeks: install a chunky, double-wide crown molding in Clara’s room.

how-to-add-extra-chunky-crown-molding

Admittedly, I cut ahead of Sherry and got this finished before her canopy plans were fully underway, which is why her update is still only partly done. She did start early the next morning to keep things moving, and hopes to photograph the finished canopy soon.

When we painted the walls and ceiling about six weeks ago, we left a thin, slightly yellowed line where the white walls met the pink ceiling because I planned to add crown molding right after. “Right after” turned into a bit longer, but the crown addition was intentional — we wanted a thicker profile to match the heavier trim found elsewhere in the house (dining room, living room, bedroom, office, and foyer) and to give the room more architectural presence.

img 61659 2

To mimic the look of the original, I installed a piece of baseboard under the crown so the overall profile reads as one substantial molding. From a distance the result looks well-proportioned alongside other woodwork in the house — it complements chair rails, paneled doors, and window mullions without feeling oversized.

img 61659 3

I selected 3.25″ tall baseboard to create that extra thickness while avoiding waste from boards wider than necessary. To keep a consistent reveal from the ceiling, I cut small spacers and nailed the baseboard in place with a nail gun, checking placement with a level because ceilings aren’t always perfectly straight. I also marked studs lightly with a pencil so I could shoot nails into solid backing for a strong hold.

img 61659 5

Once the first piece of baseboard was up, I held a length of crown in place to verify the look. Up close the baseboard seemed chunky, so we compared it to the trim in other rooms to be sure it matched the scale we wanted. It did, so I continued around the room.

img 61659 6

Installing the baseboard went quickly; corners required simple 45° miter cuts, and where boards weren’t long enough I used 45° scarf joints. That served as a warm-up for the more precise cuts needed for the crown molding.

img 61659 7

For the crown cuts I used a Kreg Crown Pro to hold the molding at the correct angle on the miter saw. The tool makes it easier to cut crown at the angle it sits against the ceiling so corner joints meet cleanly. If you’re new to crown, guide tools like that save a lot of guesswork.

img 61659 8

This stage took longer than the baseboard; a mid-day meeting stretched the workday, and I didn’t finish hanging all the crown until later that evening.

img 61659 9

The next day I caulked every seam — corners, scarf joints, the junction where baseboard meets wall, where crown meets ceiling, and where baseboard meets crown. Caulking those interfaces helped the two pieces read as a single, thicker molding rather than two separate elements.

img 61659 10

After the caulk had set, I touched up the paint to seal everything and create a uniform, semi-gloss finish. Caulk often dries slightly matte and can attract dust, so painting over it makes the trim read consistently and keeps the seams looking clean.

Here’s a close-up of the finished detail. We really like the result. We weren’t sure a white trim profile would have as much impact in a room with white walls as it does against the pink ceiling, but the crown actually emphasizes the ceiling color — like a visual arrow that draws the eye upward and adds architectural interest.

img 61659 11

The trim gives the room a more polished, finished look. It wasn’t the flashiest makeover, but it checked an important box for me. Clara calls them “the wood things we hung up there,” which is adorable, and Sherry’s happy because the canopy wall is now clear for the next phase of decorating. Big progress is happening there.

img 61659 12

Cost-wise, the crown molding was about $76 and the baseboard about $61, totaling $137. The boards came pre-primed. We used a semi-gloss white from a previous trim painting session; if you need paint and caulk, budget an extra $25 for a quart and supplies. I actually sprayed the trim back in early September when I had the sprayer set up for another project, so the paint was ready before installation — a small time-saver, even if the painted pieces sat in the garage for a while before I installed them.

img 61659 13

Now I’m tempted to add the beefed-up crown throughout the rest of the upstairs to match. Aside from the bedroom that already had it, there are two bedrooms, two bathrooms, and a long hallway with awkward angles that would benefit from the same treatment. I’m oddly excited about tackling those runs — which might say more about my fondness for nail guns and miter saws than anything else.