Objectales

Popular

How to Paint a Brick Fireplace for a Flawless Finish

featured 37075

We’re following up on the fireplace update I mentioned in yesterday’s post about removing our old, not-baby-safe wood stove.

img 37075 1

This is just the second step in a much larger fireplace makeover—one of probably a dozen or more phases. We like to work in stages, so for now our goal was to spend as little as possible while getting the fireplace to look cleaner and safer in the short term. Here’s how it looked the morning we started:

img 37075 2

And here’s the same area the evening we finished this quick facelift:

img 37075 3

img 37075 4

I know the orange paneling reads pretty intense right now, but paint can be wildly transformative. We didn’t remove the paneling in our previous house’s den—just primed and painted it—and the difference was dramatic. Try to imagine these paneled walls in a soft, neutral color with glossy white beams and trim, and the fireplace painted in matching semi-gloss white. That lighter, cleaner look is the direction we’re aiming for.

img 37075 5

Those candles and the mirror tucked in the firebox are not Clara-approved—just a quick styling choice for photos. I wanted something pretty in the opening for the pictures, though in daily life it won’t be decorated while she’s awake. Admittedly the staged look gave me a few date-night ideas for when the baby is asleep, but mostly it was about making the space feel finished for the photos.

img 37075 6

Realistically, the firebox will likely end up half-full of small toys, books, and pillows—Clara loves hiding things around the house—so making it safe and soft is the priority. I can already picture her sitting in that little nook with her stuffed giraffe, Gee, reading or snuggling.

This mini facelift took about five hours total—on and off, allowing for drying time—and cost us just eight dollars and three cents. We used leftover Olympic Premium No-VOC primer from the guest room, a quart of Benjamin Moore’s Temptation (satin) color-matched to Olympic Premium No-VOC paint, and white semi-gloss trim paint we keep on hand for touch-ups. Primer isn’t always necessary for brick, but we had it available and chose to use it.

You’re probably familiar with us painting brick fireplaces before; we refinished two in our first house and loved the results. These before-and-afters show how much paint can change a room:

img 37075 7

img 37075 8

img 37075 9

img 37075 10

img 37075 11

If you want a detailed how-to, our original fireplace-painting tutorial is available here. Below is a concise recap of the steps we took to prep and paint the current fireplace, focusing on safety and a durable finish.

  • Closed the damper and declared the fireplace inoperable. We won’t be burning wood here; eventually we may add a gas or electric insert.
  • Thoroughly cleaned the firebox, exterior brick, mantel, and hearth with soap and water to remove grease and ash (we used Dr. Bronner’s and water), then let everything dry completely.
  • Primed the firebox using Olympic Premium No-VOC primer. Note: if you plan to use the fireplace for actual fires, do not paint the firebox unless you use high-heat rated products.

img 37075 12

  • Painted the firebox with Benjamin Moore’s Temptation in satin (color-matched to Olympic Premium No-VOC paint).

img 37075 13

  • Taped the surrounding wall to protect it while brushing into the textured brick.
  • Caulked the large gap between the tile hearth and the firebox for a seamless finish when painted.
  • Filled other deep holes and gaps in the brick so the painted surface read more even and less shadowed.

img 37075 14

  • Primed the brick surround, wood mantel, and even the tiled hearth.
  • Applied two coats of Olympic Premium No-VOC semi-gloss white to the brick surround, mantel, and tiled hearth. We prefer the clean, all-white look, though later we may add complementary materials or colors when we fully renovate the surround.

img 37075 17

  • Finished the tiled hearth with three thin coats of Safecoat Acrylacq, a low-VOC alternative to polyurethane. Note that many polyurethanes yellow over time; our trusted options are Safecoat Acrylacq and Minwax Water-Based Polycrylic in Clear Gloss.

Painting floor tile isn’t something pros usually recommend, but we used this prime-paint-poly method on terra cotta hearth tiles in our first house as a temporary fix—and it held up for years. The matte, porous nature of terra cotta helps paint adhere, but results will vary by tile type and traffic. We plan to replace the hearth tile in the future when we can prioritize a larger renovation, but for now the painted finish makes the fireplace feel clean, cohesive, and baby-friendly.

img 37075 18

img 37075 19

Have you painted brick or primed-and-painted tile as a temporary solution? Did it hold up, or did you replace it with something more permanent later? And yes—my husband does sometimes snap wildly unflattering photos of me while I’m painting, so fair warning if you like documenting projects: revenge photography is real.