Objectales

Popular

How to Paint Trim with a Sprayer for Smooth Even Coverage

featured 63839

How We Removed the Blue Trim: Spraying the Office Trim Step-by-Step

Last week’s conversation about office layout pushed us to finally tackle the blue trim in that room. The scope—baseboards, crown molding, and five windows with a total of 66 panes—made hand-painting feel unrealistic, so we decided to spray. We prepped the room, taped everything off, and hoped the floors would survive. This is what we learned from the trim-spraying experiment: what worked, what didn’t, and tips for anyone thinking about doing the same.

img 63839 1

Why We Chose Spraying

We’d sprayed upstairs trim before moving in, when floors weren’t a concern, and it was straightforward. Downstairs rooms we’d painted by hand because they needed to stay functional. The office, however, had little furniture and could be isolated for a few days, so we decided to spray and see if it saved time overall despite the heavier prep.

img 63839 2

Preparation: Remove, Cover, and Contain

We emptied the room except for a heavy file cabinet that we covered. Displaced items lived in the dining room and foyer for a couple of chaotic days. The first major prep step was protecting the floors: we rolled out rosin paper across the entire room because our sprayer produces fine mist that settles everywhere. We taped the paper securely at the edges to reduce the chance of paint reaching the hardwoods.

img 63839 5

For the windows we tested a simple, low-tech solution instead of liquid masking: we cut rosin paper squares and taped them roughly to the center of each pane. We didn’t tape every edge—just enough to prevent the worst of the overspray. We left one pane uncovered as a control; spoiler: that uncovered pane was a massive hassle to clean later.

img 63839 7

Sealing the Room

To keep primer and paint dust from escaping, we taped a tarp across the doorway and installed a tarp zipper to create a resealable entrance. That simple zipper system made entering and exiting much easier and did an excellent job containing the paint mist.

img 63839 8

The Spraying Process

I suited up in a painters’ suit and booties and started with a primer coat. The sprayer clogged early on, which ate time and left me covered in primer, but after cleaning it I finished the primer. The room was darker than usual because windows were covered and clouds rolled in—lesson learned: bring a work light.

img 63839 9

After the primer dried, I sprayed a first coat of white trim paint and cleaned the sprayer thoroughly between coats. Spraying went quickly—about 30 minutes per coat for the whole room—but the speed came with drawbacks: it’s tough to reach every angle of trim in a single pass, which meant doing multiple coats and careful timing to avoid runs.

img 63839 12

Cleanup: Window Scraping and Floor Checks

Removing the window coverings revealed how imperfect our quick rosin squares were—some bits of paper stuck to the panes and required scraping. We tag-teamed 66 panes using straight razors for the main surfaces and an X-Acto or putty knife for corners. It was time-consuming and physically demanding, but still far better than dealing with the completely uncovered pane, which took nearly half an hour to clean by itself.

img 63839 17

We nervously pulled up the rosin paper on the floor and were relieved: the protection worked. No drips had penetrated to the hardwood. The room was bright again and free of blue trim.

img 63839 19

Lessons Learned and Next Steps

Spraying was definitely faster by the clock—one primer and two paint coats took about 1.5 hours of spraying compared with an estimated 4+ hours if painted by hand. But prep and cleanup were substantial. Overspray on walls and ceilings meant more sanding and touch-ups, and one of our coats ran more than expected, forcing additional sanding and hand-painting in spots. We also discovered several gaps along moldings that need caulking now that everything is white.

img 63839 21

We’re deciding on a wall color—something light with a hint of color rather than pure white—and are starting to mock up built-ins and furniture placement with tape. We’ll probably spray the dining room next, since it’s another space that can be easily quarantined.

Practical Tips

  • Protect floors thoroughly with rosin paper and tape the edges securely.
  • Mask windows with paper squares or liquid masking if you trust the product—test first. Covering the center of panes saves a lot of scraping later.
  • Contain the room with a tarp and a zipper entry to prevent mist escaping.
  • Bring bright work lights; covered windows make rooms much darker than expected.
  • Clean and de-clog the sprayer between coats to avoid sputtering and runs.
  • Expect to sand and touch up small areas by hand after spraying.

img 63839 24

Have you sprayed trim before? We’d love to hear tips or tricks—especially for avoiding runs and reducing window cleanup—before we tackle the dining room. This was our last big room with blue trim, and finishing it felt like a major milestone.