Objectales

Popular

How to Prep Kitchen Cabinets for Painting: Complete Checklist

featured 39969

We were making steady progress refinishing our inexpensive cabinets with primer and glossy white paint when the hurricane knocked out our power for several days. Thankfully the electricity was eventually restored, but the outage paused work because John needed to use power tools — like drills and a saw — to finish building parts of the cabinet assembly before we could paint and reattach everything in the office.

Before the outage we completed all the prep and priming, and took a ton of photos of the process. Since we refinished solid wood cabinet doors (this method does not work on laminate), we decided to document the steps in detail for anyone who wants to follow along, whether you’re creating a wall-to-wall built-in desk or giving wood kitchen cabinets a fresh painted face.

First we removed all hardware from the doors and took the doors themselves off their hinges. We also used two plastic drop cloths to create a contained work area to protect the sunroom floor and walls from primer drips, paint splatter, and sanding dust. That made clean-up and protection much easier while we worked.

img 39969 1

To stay organized, we put door handles and their screws into one plastic bag and the hinge parts from each cabinet into another. Keeping the fasteners separated prevents mixing handle screws with hinge screws and saves time and frustration when it’s time to reassemble.

img 39969 2

Next I sanded each door. I started with a coarse grit (around 50) to remove the glossy finish, then moved to a finer grit (about 200) to smooth the surface so primer and paint would adhere well. Hand-sanding works, but after the first pass I switched to our electric sheet sander to save time and effort.

img 39969 3

The power sander made the job much faster, though the vibration left my hand a little numb. Sanding each of the six doors twice — first with low grit and then with higher grit — took roughly an hour per door overall, including detailing and edges.

img 39969 4

We decided to leave the cabinet interiors and the backs of the doors in their natural wood finish and paint only the cabinet exteriors and the fronts of the doors glossy white. We like the durability and look of natural wood inside drawers — it hides wear better than paint and complements the white fronts visually. The result will be crisp, white cabinet faces with warm wood interiors revealed when the doors are opened.

img 39969 6

Before priming, I applied Frog Tape around the edges on the backs of the doors where we wanted a clean transition from painted front to natural back. For the cabinet frames, I opted to carefully roll thin coats of primer along the edges rather than tape every interior surface, since a lightly loaded foam roller allowed me to create a crisp line with less effort and tape.

img 39969 7

Then I sanded the cabinet faces and frames in place (using our drop cloth setup and the sander’s dust collection). Sanding the frame edges is important because cabinet doors make frequent contact with the frame; roughing up that surface helps primer and paint bond and prevents premature chipping.

img 39969 9

For primer we chose a clean, low-VOC product and applied it with a small foam roller to create a thin, even coat without visible brush marks. Primer will often look imperfect when freshly applied — thin, slightly uneven, and a bit rough — and that’s normal. It’s designed to create a bonding surface for paint rather than to be the finished appearance.

img 39969 10

I used a brush to reach the tight frame edges the roller couldn’t get into, making sure to wipe excess product off the brush so there were no drips. After brushing the edges I immediately smoothed the surface with the foam roller to eliminate brush strokes while the primer was still wet. Working one door at a time is important — roll the sides, brush the cracks, and then reroll the front once — so the primer stays workable and doesn’t begin to set between steps.

img 39969 12

After priming all doors and frames, the room looked like a tidy collection of white fronts and natural wood backs. Some doors appeared whiter in areas where I had sanded out deeper scratches; that’s only because more of the darker wood was removed and covered by primer. Once we apply a few thin, even coats of glossy paint, everything will blend into a seamless bright-white finish.

img 39969 15

Next on the to-do list is trimming the cabinet bases up by about three inches and assembling pairs of cabinets into larger double bases. We’ll do that assembly in the office to avoid moving heavy units around after they’re joined. Once the cabinets are screwed together and positioned, I’ll paint the joined units in place with the final 2–3 thin coats of glossy white to minimize the risk of dings and scratches from moving and assembly.

After the cabinets are painted and reassembled with hardware, we’ll decide on a countertop option — whether assembled planks, one continuous slab of wood, or another material such as a ready-made surface. Our goal is to get the built-in desk functional quickly, and we’ll share updates as we make decisions and progress. We love documenting the process and hope these detailed refinishing tips help you tackle your own cabinet makeover.

Psst — on a lighter note, we also shared the baby names we considered while I was pregnant, including the boy names and the other girl names we ruled out, and we’d love to hear any favorite names or naming stories you have.