How to Prepare for a Corian Countertop Installation
We weren’t thrilled with how unfinished our “new” tile-ready walls looked—the uneven, unpainted paneling and the patched, stained ceiling where we removed the upper cabinets were driving us a little crazy.

After taking out the upper cabinets, some raw paneling and exposed ceiling areas were left behind, and they stuck out like a sore thumb. We decided the quickest way to make the kitchen feel more intentional was to prime and paint those surfaces as part of our kitchen renovation.


We gave the paneling two coats of primer and two coats of paint to make sure the grain and color were fully covered. The ceiling got more attention: some areas were previously unpainted and some were stained, so we applied several coats of Kilz CleanStart primer (a no-VOC option) followed by multiple coats of ceiling paint until everything blended. It took more layers than I care to count, but it was worth it to get a seamless look.

The update made a noticeable difference: the space already looks tidier and more cohesive. It’s still a raw, in-progress kitchen, but once we install the new countertops, reinstall trim around the window, add backsplash tile and new lighting, paint the cabinets, and lay our cork flooring, the room will feel much more polished.
Before the countertop install we also had to reinforce the peninsula overhang. The template installer warned that any countertop overhang over 10″ needs support—ours will be 12″ on two sides. Rather than paying a professional to reinforce the Corian for several hundred dollars, we chose a more economical DIY approach using steel support brackets and reinforcement inside the cabinets.
We bought six 10″ steel brackets at the hardware store and spray-painted them to match. At roughly $6 each, the total was about $36—far less than the $300 option.

Once the paint dried, I brought the brackets in along with scrap boards cut into 12″ sections. The installer recommended not screwing the brackets directly into the cabinet sides because those panels can be thin. Instead, we positioned thicker wood blocks inside the cabinets and screwed into that solid backing so the brackets would carry the load securely.

After measuring and marking for even spacing, I loosely tapped the scrap wood into place behind the cabinet walls so I could fasten the brackets into something sturdy. To make sure the brackets sat at the correct height for the overhang, I used another scrap board as a temporary counter while I attached each bracket with three screws.


Here’s how the brackets looked after installing the first three supports. Once the Corian countertops arrive, we’ll also secure them from underneath into the countertop’s reinforcement areas. Corian is manufactured to allow for underside reinforcement, so the counters will be anchored to the brackets as an added safety measure.

Although the brackets will be mostly hidden once the counters and painted cabinets are in place, we’re planning to add shaker-style panels to the peninsula’s back and possibly the side. Those panels will add visual detail and provide a way to conceal the brackets completely by routing a recess in the trim that fits over them.

With the brackets in and the surfaces primed, the kitchen is now in a counter-ready state. We also primed a thin stripe along the refrigerator surround right where the counter will meet it. We avoided painting the cabinets fully before the countertop install because of the inevitable scrapes and touch-ups that happen when heavy counters are maneuvered into place; priming that small area ensures that any tiny gap at the counter edge will be white paint and not exposed brown wood.

The space is starting to read like a kitchen, even with placeholder wood chairs that aren’t the final height or color. In reality, it still looks a bit chaotic during the workday, but the progress is encouraging.

We did take a safety pause: when we first saw the exposed brackets we panicked about our toddler’s safety. To make the edges more visible and less hazardous, we propped a leftover cabinet shelf across the opening as a temporary counter so Clara could see the drop more clearly. The chairs help mark the area too.


We’re excited to share that the next update should be installed countertops—fingers crossed for tomorrow. Having a functioning sink again will be a huge quality-of-life improvement; we’ve been getting by with a working fridge, stove, and dishwasher, but washing non-dishwasher-safe items in the bathroom sink has been far from ideal.
What are you working on right now—are you tackling any priming or painting projects, or preparing for a countertop install? It feels great to see visible progress, even when the work involves many coats of primer and patience.
Psst—We’ve listed our old granite counters on Craigslist for anyone interested; contact details are available in our original listing.








