How to Properly Seal Ardex Concrete Countertops
Thanks for all the kind words on Teddy’s arrival last week. We’re home now and slowly settling into life as parents to a newborn again (if you have tips for getting a baby to sleep between 10pm and 4am, please share). We’ll be on a lighter posting schedule for a bit, but one project we managed to finish about 48 hours before Teddy was born was finally sealing our kitchen’s recently Ardexed concrete counters.

We’ve posted other sealing tutorials in the past—on de-hazing and sealing tile, sealing grout, and finishing cork—so this time I’ll focus on what we chose to protect our Ardex concrete counters and why. There are a lot of strong opinions out there about which sealing step can make or break a concrete countertop, so we read widely and took some of your suggestions from our March 24th update when selecting which products to test.

In the end we went with a two-step approach: two coats of 511 Impregnator Sealer to protect the concrete itself, followed by three coats of Safecoat Acrylacq as a food-safe top coat. The Impregnator is designed to penetrate the concrete and reduce staining and moisture absorption, while the Acrylacq provides a non-toxic, food-safe surface finish that beads liquids and resists wear.
The Impregnator applied very easily. Its watery consistency spread well, so I poured a small amount into a bowl and brushed liberally across the clean concrete. The product instructions recommend wiping off any excess after a few minutes; most of what we applied soaked in quickly, but I wiped the surface anyway as a precaution. The counter looks darker and slightly blotchy while the sealer is wet, but once it soaks in and dries it returns to a more uniform, natural tone.

We applied two coats of the Impregnator, 24 hours apart, and let the last coat cure for 24 hours before moving on to the top coat. For the final protection we used Safecoat Acrylacq. One major reason for choosing this product was its non-toxic formulation—important in a kitchen—and its ability to produce a hard, bead-resistant finish that helps prevent rings and stains from liquids.

I applied the Acrylacq by pouring a small puddle onto the counter and spreading it thinly with a brush. It goes on with a slightly blue tint while wet, which fades as it dries. We applied three thin coats total, allowing roughly 12 hours of drying time between coats, and then let the finished surface cure for three full days before placing anything back on the counters—even though it felt dry to the touch sooner.

Although the Acrylacq we used is labeled as a satin finish, it produced a noticeably glossier, more polished look than the original chalky Ardex surface. That gloss made the counters feel more like a finished stone surface rather than a DIY concrete job, and the added sheen also makes the counters easier to clean: spills and splatters now bead up on the surface and wipe away without leaving marks.

So far the finish seems durable. We’ve cooked several family meals and slid heavy dishes around without noticing any obvious scratches. That suggests this combination of an impregnating sealer followed by multiple Acrylacq top coats produces a food-safe, relatively scratch-resistant surface that resists liquid penetration—at least in the short term.

My only minor gripe is that the glossier finish highlights surface imperfections—areas I should have sanded a bit more during the Ardex application. Glossy coatings tend to accentuate bumps and scratches the same way shiny paint shows wall flaws. Sherry is more relaxed about these characterful spots—“they’re supposed to look like that”—but as a perfectionist I can see places I would have smoothed better. Still, both of us are thrilled to have the counters back in service and to be using our kitchen like normal people again. It’s a dramatic upgrade from the old yellow laminate that was there before.

There are improvements I’d like to make to my Ardex technique—particularly sanding more evenly—but overall I’m very pleased with the result. The sealing step made a huge difference in transforming the surface into something that looks finished, is easier to maintain, and performs like a polished countertop.

We haven’t really put the counters through heavy daily use yet beyond a few family meals, so we’ll continue to monitor how the sealers perform. If stains or scratches appear over time we’ll report back with updates and more photos. For now, the counters are holding up well and look great.
UPDATE: We shared how the counters are holding up in a later post.
Has anyone else tried this combination of a penetrating sealer and an Acrylacq top coat? Or have you had success with a different sealing system on Ardex or other concrete countertops? Share your experiences so others tackling this project can learn from real-world results.
On a lighter note, here’s the requested baby photo comparison. Below is Teddy at four days old:

And here’s Clara at around three weeks old in a similar pose. They share long fingers and toes, the same faint blonde brows, and a similar tiny chin—though Clara had less hair at that age. In person they definitely look related, though not exactly like twins.

Now about those newborn sleep tips for the 10pm–4am stretch—we’re all ears.








