Objectales

Popular

How to Remove an Old Sliding Shower Door Safely

featured 58890

How We Removed Sliding Shower Doors and Re-Caulked the Tub

Don’t eat while you read this—really. This is the story of how we removed the old sliding shower doors from our bathroom, cleaned up the mess beneath them, and replaced the enclosure with a fabric shower curtain. If you’re searching for a step-by-step guide to remove sliding shower doors, improve tub hygiene, and re-caulk correctly, this covers the essentials and what surprised us along the way.

img 58890 1

The doors had enclosed the tub in a way a soft white curtain wouldn’t, and they were past their prime. There were visible rust lines along the metal frame and thick ridges of old silicone caulk sealing everything in place.

img 58890 2

img 58890 3

Another practical reason for the change: the doors were low enough that John accidentally banged his head walking in—twice. After a few re-enactments (fully clothed), we decided the doors had to go.

img 58890 4

Getting the doors out started with swinging the panels up at the bottom to free them from the top track. Once the panels were lifted away, the top frame lifted right off. We removed a few screws from the side frames and began to pull them away from the wall.

img 58890 5

img 58890 6

That’s when the caulk revealed itself. Thick wads of silicone had been packed into every seam. We scored and sliced the old caulk repeatedly with a razor and a caulk-removal tool to free the frames.

img 58890 7

img 58890 8

Warning: the next part is gross. Under the bottom frame we found a thick layer of grime and mildew. The frame itself wasn’t screwed into the tub at the bottom, so it lifted off and exposed this hidden mess. I scraped away a compacted, 3D-looking scum with a flat razor—an unpleasant but necessary step.

img 58890 9

With the frames removed the tub immediately felt more open. From a distance it looked clean and airy, and the space was much less claustrophobic without the metal enclosure.

img 58890 10

Even the screw holes where the frames had attached were small and unobtrusive. We filled each one with a small dab of silicone caulk so they wouldn’t wick water and would be hidden behind the new curtain.

img 58890 11

Closer inspection revealed the main problem: deteriorated and missing caulk around the tub perimeter. There were pinkish mildew stains and some old rotted spots. The solution was to remove all the old caulk and re-caulk the full tub perimeter, the vertical seams, and the base where the tub meets the floor.

img 58890 12

We used a combination of a sharp box cutter and a simple plastic caulk-removal tool—one with a razor in the V to slice and pull the silicone away. That tool handled most of the seams, while the box cutter worked well in tight spots along the floor where the tool couldn’t reach.

img 58890 13

img 58890 14

It took about an hour of scraping and picking to remove all the old caulk. The pile of removed silicone looked satisfying in a gross sort of way.

img 58890 15

When applying new sealant, choose a 100% silicone caulk made specifically for tubs and showers—this resists mildew and holds up better in wet environments than general-purpose caulk. We used white silicone to match the tub and taped the top edge so the finish would meet the dark tile cleanly. Smooth the bead with a wet finger and peel the tape before the silicone skins over for a sharp line.

img 58890 16

img 58890 17

After the silicone cured we installed an extra-long fabric shower curtain on a tension rod. Raising the curtain to ceiling height instantly made the space feel taller and brighter—the white fabric lets light through and creates a much airier atmosphere than the metal doors.

img 58890 18

Our 95″ waffle-weave cotton curtain is machine washable and has been durable over the years. We use a fabric liner inside the tub to block spray and protect the curtain. A soft curtain is also more adaptable when moving, since standard shower curtains fit in many bathrooms.

All told, a little time spent removing sliding shower doors, cleaning the hidden grime, and re-caulking the tub made a big difference in both hygiene and the feel of the room. The bathroom still needs future updates—tile repairs around the toilet and sink, some corner damage at the shower, and eventually reconfiguring the layout to create a single larger bathroom with a double sink—but for now the fresh caulk and new curtain made it feel clean and spacious.

img 58890 19

If you plan to remove sliding shower doors, expect to find old caulk and hidden grime. Bring a razor or caulk-removal tool, good quality silicone caulk for re-sealing, and consider a full-length fabric curtain to open up the space and let more light in.