How to Replace Shower Tiles Without Hiring a Pro
Quick Facebook note: Facebook changed how posts appear in feeds, so if you’ve stopped seeing our updates and want them back, here’s how to fix it:
- Go to our Facebook page
- Hover over the “Liked” button
- Make sure “Show in news feed” is checked — if it isn’t, enable it so our posts will appear in your feed again.
Now, back to the bathroom update.
Replacing the dated tree tile border with glass subway tile
If you missed the earlier post where we started removing the dated tree-pattern border (yes, the one that makes us hum The Lion King), here are the highlights and photos to bring you up to speed. The original border ran around all four walls and felt very busy for the small bathroom.

After prying away the old border with a Dremel and a screwdriver, we prepared to install a clean, clear glass subway tile replacement called “Glass Snow” from The Tile Shop. The glass tiles have an opaque backing so thinset won’t show through, but they still read as clear glass — a nice modern touch for the space.

Materials and tools
This project was straightforward since we already have a basic tiling toolkit. The main new purchases were a tub of thinset mortar and a bottle of thinset admixture to mix it to the right consistency. We picked those up at The Tile Shop along with the tiles. Other small items included 1/8″ rubber spacers and a small notched trowel.

Applying thinset and setting the tiles
We mixed the thinset to a spackle-like thickness — think thick pancake batter — and spread it onto the narrow band of wall using a small trowel. Then we went back over the thinset with the grooved edge of the notched trowel to create the ridges that help tiles bond properly.

Installing these glass subway tiles was quick. Because the area was small, leveling wasn’t a concern; we pressed each tile into the thinset and used 1/8″ spacers to keep consistent grout joints. The tiles’ opaque backing prevented the thinset from showing through, preserving the glassy look.

Cutting and fitting tiles
A few corners required cuts. For straight cuts we used our tile cutter from a previous bathroom project — it scores the glass and snaps it cleanly along the line. For a small notch around the light switch we had to bring out a wet saw to make the precise corner removal. The small imperfect edges will be hidden by the switch plate, so they’re fine.

Grouting and sealing
We let the thinset cure completely, then mixed and applied the grout. To match the existing grout in the rest of the room, we used leftover “Antique White” grout that the previous owners had left behind. Although we might have chosen pure white or a soft gray for new glass tile, matching the room’s existing grout made the new border look like it belongs.

Using a grout float, we packed grout into the joints, waited a few minutes, then wiped the surface clean with a damp sponge. The grouting step took roughly 45 minutes. After the grout dried, we sealed the grout lines to protect them from moisture and stains, applying the sealer with a sponge and wiping away any excess shortly after.

Final touches and results
We finished by caulking the shower corners and allowing everything to dry. From start to finish (demo, tile setting, grouting, and sealing) the work fit neatly around two-hour naps — roughly 2.5 Clara naps, or about six hours total. The glass tile reflects light and brings a cooler tone to the space, balancing the warmer beige tiles already in place.

The new border reads cleaner and less busy than the tree motif that used to run around the room. In natural and wet conditions the glass looks particularly sleek — tiny droplets cling to the surface and the tile picks up subtle blues and greens from nearby artwork and the pendant light.

Budget breakdown
- Glass Snow clear subway tile (The Tile Shop): $50
- Thinset mortar and admixture (The Tile Shop): $28
- Small trowel and spacers (Home Depot): $6
- TOTAL COST: $84
We also invested in a Dremel Multimax and a grout attachment (about $130), which brings the project cost to $214 if you include that tool purchase. Since we regularly use the Dremel for other projects, we count it as an investment in our tool collection rather than a one-off expense.
This project was an easy win: affordable, quick, and it refreshed the bathroom border from dated to modern. Have you tackled a small tile update lately? Whether it’s a bathroom border or a kitchen backsplash, swapping tile is a high-impact DIY that can be completed in short bursts of time.









