Objectales

Popular

How to Reupholster a Rocking Chair: 7-Step Guide

featured 30457

Our Craigslist Rocker: A Makeover Plan

We found this lovely rocking chair on Craigslist for $25. The simple silhouette, low back, and chunky, warm wood immediately appealed to us, and we wanted a rocker for the main living area of our new house. I spend a lot of time feeding Clara in the public spaces rather than retreating to the nursery, and she already loves rocking at John’s mom’s house. We figured this chair would be perfect for that quality time — but the upholstery left a lot to be desired.

img 30457 1

The Seat: A Straightforward Fix

The bottom of the seat is made from several boards. Our plan for the seat is straightforward: remove those boards, add a layer of foam for comfort, and wrap the foam in batting. We’ll staple the batting around the underside of the seat to smooth and secure it, then reupholster the top in the same way we would any removable chair cushion. Finally, the seat would be reattached by screwing it back into place from the underside. That process feels familiar and manageable.

img 30457 2

The Back: The Head-Scratcher

The back is where we ran into trouble. When the fabric around the back panels was removed, we could see straight through the chair: each side has an upholstered panel, and there doesn’t appear to be much solid structure behind the fabric. It looks like the original builder stapled the fabric in place and then covered those staples with trim. That might explain the tidy appearance, but it also raises a concern: if there’s nothing but fabric spanning the opening, will the back support a person’s weight over time? It seems likely it could sag or feel unstable.

We’ve seen woven seat-belt style webbing used on chair seats to create firm support, and we’re wondering whether something like that would also work for the back — essentially a supportive layer that people can lean against without feeling like they’re sliding into a hole. The idea would be to add internal support, then attach two finished fabric panels on either side so the outside looks neat and finished.

Possible Approaches to Add Back Support

Here are a few practical options we’re considering. None of them are a single “right” answer; they’re just reasonable approaches to give the back the structure it needs while keeping the pleasing look of the chair.

  • Add webbing: Stretching durable webbing (or seat-belt-style straps) across the back frame can create a flexible but supportive base. The webbing can be stitched or stapled to the frame and then covered with foam, batting, and the final fabric panels.
  • Install a thin plywood or hardboard panel: A cut-to-fit plywood or MDF panel secured to the inside of the back frame would provide a solid backing, which can then be padded and upholstered. This method gives more firmness than webbing and can be useful if you want a consistent flat surface behind the fabric.
  • Create a subframe with horizontal slats: Adding slats across the inside of the back creates structural support while keeping some give. Slats can be covered with foam and batting for comfort before upholstering.
  • Combine methods: For a balance of comfort and support, you can use webbing plus a thin support panel in higher-wear areas. Then finish with foam, batting, and the visible fabric panels on both sides.

Finishing and Aesthetic Considerations

Whichever support solution we choose, we’ll want to make sure the visible sides look clean and finished. The original trim likely hid staples and edges; we can replicate that approach or opt for new trim or welt cord that complements the chair’s wood. Padding thickness and how taut the fabric is stretched will affect how the chair looks and feels, so we’ll test small sections as we go.

Next Steps

Our immediate next step is to fully remove the current fabric so we can inspect the frame and measure the opening. Once we know what we’re working with — the exact clearance, any existing attachment points, and the frame’s condition — we’ll decide between webbing, a panel, slats, or a hybrid solution. After that, it’s foam, batting, fabric, staples, and trim. We’re excited to give this inexpensive Craigslist find new life and add a comfortable, stylish rocker to our living area for Clara and us.

If you have experience with back-support techniques or a favorite approach for reupholstering double-sided cushion backs, we’d love to hear suggestions.